DB Drive DKUR Amplifiers دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

A6 800.4, A6 1200.4, A6 1600.4, A6 1600.1D,
A6 1900.1D, A6 2800.1D
Due to continuous improvement of the product the Specifications are subject to change without notice.

ملخص المحتوى في الصفحة رقم 2

ملخص المحتوى في الصفحة رقم 3

Low Impedance Stability A6 800.4 - 2 Ohms Stereo (4 Channel) A6 1200.4 - 2 Ohms Stereo (4 Channel) A6 1600.4 - 2 Ohms Stereo (4 Channel) A6 1600.1D - 1 Ohm Mono A6 1900.1D - 1 Ohm Mono A6 2800.1D - 1 Ohm Mono slope crossover network. Channels 1 and 2 are 12db slope for the Highpass setting and channels 3 and 4 feature a selectable 12db slope on the Highpass setting and 12db or 24db slope on the Lowpass / Bandpass setting. Bass Boost For added low frequency performance the amplifiers are equ

ملخص المحتوى في الصفحة رقم 4

ملخص المحتوى في الصفحة رقم 5

A6 1600.1D, A6 1900.1D, and A6 2800.1D

ملخص المحتوى في الصفحة رقم 6

A6 800.4, A6 1200.4, A6 1600.4

ملخص المحتوى في الصفحة رقم 7

( A6 800.4, A6 1200.4, A6 1600.4 ) ( A6 1600.1D, A6 1900.1D, A6 2800.1D ) The A6 1600.1D, A6 1900.1D and A6 2800.1D are equipped with a variable 24db slope network that allows you to select the crossover mode (Highpass—Full Range) and desired crossover point for channels 1 and 2. Channels 3 and 4 allow you to select between a feature a variable Bass Boost EQ is set at 45Hz. In some subwoofer enclosure installations it Highpass 12db slope, a 12db Stereo Lowpass / Bandpass slope and a mono 24d

ملخص المحتوى في الصفحة رقم 8

A6 800.4 A6 1200.4 A6 1600.4 Peak @ 14.4V : 2 ohms 4 x 90 W 4 x 110 W 4 x 150 W 4 x 180 W 4 x 225 W 4 x 300 W 4 ohms 4 ohms bridged 2 x 300 W 2 x 500 W 2 x 600 W Rated Power @ 4 Ohm 4 x 75 W 4 x 95 W 4 x 125 W Frequency Resp. 15Hz - 25KHz 15Hz - 25KHz 15Hz - 25KHz S/N Ra o (A-weight) >95dB >95dB >95dB THD with 80k filter <0.5% <0.5% <0.5% Low Input Level 285mV - 6V 285mV - 6V 285mV - 6V Ch 1&2 High Pass Filter 50Hz - 3KHz 50Hz - 3KHz 50Hz - 3KHz Ch 3&4 High Pass Filter 15Hz - 500Hz 15Hz - 500Hz