ملخص المحتوى في الصفحة رقم 1
A 23 Amplifier
Owner’s Guide
ملخص المحتوى في الصفحة رقم 2
THANK YOU! Congratulations and Thank You for Choosing Parasound Your new Parasound Halo Series A 23 power amplifier presents the latest advancements in amplifier technology. The A 23 is built to the strict quality and performance standards set by Parasound. We’re proud to offer you this exceptional audio component that will bring you many years of enjoyment and dependability. Here at Parasound, we design our products to perform at a higher level of flexibility and sonic performance than you may
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS A 23 Amplifier 1 PLACEMENT GUIDELINES FOR YOUR A 23 _________________________________________________________________________________ CONNECTING A PREAMPLIFIER OR SURROUND CONTROLLER 2 TO THE BALANCED INPUTS ON THE A 23 _________________________________________________________________________________ 3 CONNECTING A PREAMPLIFIER OR SURROUND CONTROLLER TO THE UNBALANCED INPUTS ON THE A 23 _________________________________________________________________________________ 4 CONNECT
ملخص المحتوى في الصفحة رقم 4
1 PLACEMENT GUIDELINES FOR YOUR A 23 Power amplifiers are usually heavier and generate more heat than other components. To avoid damage to the A 23 or other equipment and to reduce risk of fire, you must follow these guidelines: • Place the A 23 on a separate shelf that will adequately support its weight. • Keep it away from heat sources such as air ducts or radiators. • Avoid placing it on carpeting or another material that might obstruct airflow into the openings in the chassis bott
ملخص المحتوى في الصفحة رقم 5
CONNECTING A PREAMPLIFIER OR SURROUND CONTROLLER 2 TO THE BALANCED INPUTS ON THE A 23 Left and Right Balanced Input Jacks Balanced connections will give you the best sound. If your preamplifier or surround controller has balanced XLR output jacks, we recommend that you connect them to these inputs. Refer to the Balanced and Unbalanced Lines in the Technically Speaking section for additional information about why we recommend using balanced lines. What You’ll Need: Male • One pair of balanced int
ملخص المحتوى في الصفحة رقم 6
RCA Plugs CONNECTING A PREAMPLIFIER OR SURROUND CONTROLLER 3 TO THE UNBALANCED INPUTS ON THE A 23 Left and Right Unbalanced Inputs Use these inputs if your preamplifier or surround controller doesn’t have balanced output connectors or if you simply prefer to use unbalanced connections. What You’ll Need: Left • One standard pair of shielded interconnect cables with Right RCA plugs • A source component with RCA output jacks Before Connecting Leave the AC cord on the A 23 disconnected until you
ملخص المحتوى في الصفحة رقم 7
RCA Plugs CONNECTING THE LOOP OUT JACKS ON THE A 23 TO 4 ANOTHER POWER AMPLIFIER’S INPUTS Loop Out Connector The Right and Left Loop Out jacks provide connections to route the same input signals from your preamplifier or surround controller to an additional power amplifier. In most instances, you won't use the loop out feature so you can skip this section. What You’ll Need: Left • One standard pair of shielded interconnect cables with Right RCA plugs • An additional amplifier Before Connecting
ملخص المحتوى في الصفحة رقم 8
5 CONNECTING SPEAKERS TO THE A 23 Speaker Terminals The five-way binding post speaker terminals on the A 23 accept most speaker wire terminations including single or dual banana plugs, 1/4” spade lugs, or bare wire. Refer to Bare Wire Speaker Termination in the Technically Speaking section for information about bare wire termination. Common Speaker Connectors What You’ll Need: Red ususally The GND notch signifies ground designates right or speaker left • Two lengths of speaker wire AWG 16 or
ملخص المحتوى في الصفحة رقم 9
Right Left 6 CONFIGURING THE A 23 FOR BRIDGED MONO OPERATION In certain applications, you may require your A 23 to power a single 8 Ω speaker by using its bridged mono feature. In most instances, you won’t use the A 23 this way and you can skip this section. What You’ll Need: • One length of speaker wire with banana plugs, spade lugs, or bare wires • One shielded balanced or unbalanced interconnect cable for each A 23 used in bridged mono • One loudspeaker with an impedance of 8 Ω or higher
ملخص المحتوى في الصفحة رقم 10
7 MANUAL AND AUTOMATIC TURN ON-OFF OPTIONS You can manually turn the A 23 on and off with its front panel On-Off button. It can also be triggered to turn on and off automatically when your preamplifier, surround controller, or system controller is turned on and off. Manual On-Off from the Front Panel If you want to manually turn on and off the A 23 at any time, you need to first select the Manual On-Off option by placing the Auto Turn On switch (on the rear panel) to its middle Man (Manual) p
ملخص المحتوى في الصفحة رقم 11
CONNECTING AN EXTERNAL DC SOURCE FOR 8 AUTOMATIC ON-OFF If you want to automatically turn on and off the A 23 with an external DC voltage, choose the DC Triggering option by moving the Auto Turn On switch on the rear panel to its lower 12V position. What You’ll Need: • A cable with a 2.5 mm sub-mini plug on each end (provided) • A “control” component with +9Vdc to +12Vdc trigger voltage 2.5 mm sub-mini plug Before Connecting Remove Power to all the components in your audio system. Make sure th
ملخص المحتوى في الصفحة رقم 12
9 CONNECTING THE A 23 TO TRIGGER ANOTHER COMPONENT Whenever the A 23 is turned on either manually or automatically, there is 12 Vdc present at its own DC Trigger Out jack so it can trigger additional amplifiers or other components on and off. What You’ll Need: • A cable with a 2.5 mm sub-mini plug on each end (in addition to the one provided with the A 23) • A component that can be triggered with an external 2.5 mm sub-mini plug +9 Vdc to +12 Vdc source. The A 23 DC Trigger output provides u
ملخص المحتوى في الصفحة رقم 13
10 UNDERSTANDING THE INDICATORS ON THE A 23 A AC Present Indication When the A 23 is plugged into a live AC outlet, a soft blue halo glows behind its On-Off button and its red “P” Badge glows faintly. These indicate that the unit is plugged into a live AC outlet, even when it is turned off. B On and Off Indications for Both Manual and Automatic Modes When the A 23 is first turned on, the soft blue glow behind the On-Off button turns red for about five seconds and then becomes a brighter blue.
ملخص المحتوى في الصفحة رقم 14
11 CONNECTING THE AC POWER CORD AC Power Connections We recommend that you plug your A 23 into the same AC wall outlet or power strip that powers your other audio components, especially the preamplifier or system controller. Having all the audio components on the same power circuit helps prevent hum caused by possible ground loops. The A 23 requires AC power that is continuous, rather than switched on and off. What You’ll Need: An IEC 65 AC Cord (provided) An AC outlet or high quality AC pow
ملخص المحتوى في الصفحة رقم 15
12 MAINTAINING YOUR A 23 Your Parasound A 23 power amplifier requires no periodic maintenance and has no user-serviceable parts inside. To avoid the risk of electric shock, do not remove its top cover. The amplifier’s exterior can easily be cleaned with a soft cloth pre-moistened only with a few drops of water or glass cleaner. Main Power Fuse If this fuse blows, please contact Parasound Technical Service for further advice. Notes:
ملخص المحتوى في الصفحة رقم 16
13 TROUBLESHOOTING GUIDE TROUBLE PROBABLE CAUSE REMEDY Power cord is disconnected Connect power cord No power Auto On selector switch is in wrong Check for correct position of the Auto On switch position Make sure the switch is in the AC Voltage selector switch is in the correct position for your region wrong position Replace with same value fuse AC fuse blown DC trigger source wired in reverse A 23 will not turn on Check polarity of DC source with a voltmeter or voltage too low with DC vo
ملخص المحتوى في الصفحة رقم 17
14 SERVICING YOUR A 23 If All Else Fails –Call Us for Help Call your Parasound dealer or Parasound’s Technical Service Department toll free at 1-866-770-TECH (8324). We can often solve the problem with simple diagnostic tests you can perform yourself. If we determine that your A 23 will need further inspection or servicing, we will: a) refer you to an authorized Parasound repair center near you, or b) authorize return of the unit to us and advise you of the correct procedure. Procedure for Ret
ملخص المحتوى في الصفحة رقم 18
15 TECHNICALLY SPEAKING Audio Trigger Sensitivity Adjustment The Audio Sensitivity Control sets the threshold balanced line is common to both its positive and of the audio trigger signal. You can adjust this negative conductors with respect to ground. level from a maximum sensitivity of 50 mV (fully Therefore, it is canceled or rejected by the differential counterclockwise) to a minimum sensitivity of 200 mV input circuit. (fully clockwise). If you set this control to 50 mV, the A 23 might be fa
ملخص المحتوى في الصفحة رقم 19
16 TECHNICALLY SPEAKING continued Choosing Brands of Interconnect Cables and Loop Out Jacks Speaker Wire The Right and Left Loop Out jacks are convenient We are often asked to recommend specific connections to route the same input signals from interconnect cables and speaker wire. It’s true that your preamplifier or surround controller to an with some amplifiers, sound quality will vary greatly additional power amplifier. These jacks eliminate the according to interconnect cables and speaker wir
ملخص المحتوى في الصفحة رقم 20
17 PARASOUND A 23 DESIGN OVERVIEW Circuit designed by John Curl Parasound design consultant John Curl has been a To create the +/- 55 Vdc B+ and B- supply rails for each channel, we use high-speed rectifier diodes and four legend among audiophiles and electronic engineers for decades. He pioneered measurements to correlate enormous 12,000 uF Elna electrolytic filter capacitors, musical accuracy with the materials used in parts, chosen for their low Equivalent Series Resistance worked with world-
