ملخص المحتوى في الصفحة رقم 1
CAM6.6
Six-Zone, Six-Source Controller
CAM6.6T
Six-Zone, Six-Source AM/FM Receiver
INSTRUCTION MANUAL
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFEGUARDS 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11.Grounding or Polarization - Precaution should be taken so that the WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, grounding or polarizatio
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS USER SECTION Product Introduction ............................................................................................................................5 Component Guide CAM6.6 Controller ..............................................................................................................................6 UNO-S1 Keypad..................................................................................................................................7 UNO-S2 Keypad .
ملخص المحتوى في الصفحة رقم 4
TABLE OF CONTENTS Speaker Connections ........................................................................................................................36 Zone Fixed/Variable Audio Output ......................................................................................................37 12VDC Home Theater Trigger In/Out..................................................................................................38 12VDC Mute Trigger In/Out .........................................
ملخص المحتوى في الصفحة رقم 5
PRODUCT INTRODUCTION ® Thank you for choosing the Russound CAM6.6 multisource, multizone controller to enhance your home with distributed audio. This controller’s state-of-the-art features and components blend seam- lessly with your unique lifestyle and preferences. ® Besides distributing and controlling six audio sources to six rooms (zones) using RNET keypads, your CAM6.6 offers many features that increase your enjoyment of living. Here are several that you may find particularly beneficial. F
ملخص المحتوى في الصفحة رقم 6
USER COMPONENT GUIDE CAM6.6 Controller-Front Panel 2 1 1 MAIN POWER SWITCH - Supplies power to the CAM6.6 2 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position. Any active room (1-6) is indicated on the front of the controller by a green LED, which shows red when the room is inactive. In most basic installations, all functions and room set- tings are controlled through the
ملخص المحتوى في الصفحة رقم 7
USER COMPONENT GUIDE UNO-S1 Keypad 1 102.5 2 6 3 5 4 1 LCD PANEL - 5-character backlit display shows status of the room, source, volume, and more 2 SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. 3 VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room 4 IR RECEIVER - Receives IR signals and passes them to the controller and source equip- ment. Also used when operating the UNO
ملخص المحتوى في الصفحة رقم 8
USER COMPONENT GUIDE UNO-S2 Keypad 1 Command Keys 7 CD PLAYER 1 2 6 3 5 4 1 LCD PANEL - 12-character backlit display shows status of the room, source, volume, and more 2 SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. 3 VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room 4 IR RECEIVER - Receives IR signals and passes them to the controller and source equip- ment. Also used
ملخص المحتوى في الصفحة رقم 9
USER COMPONENT GUIDE UNO-TS2 Touchscreen 1 2 10 3 9 4 5 8 7 6 1 IR RECEIVER - Receives IR signals and passes them to the controller and source equip- ment. Also used when operating the touchscreen by using the SRC2 remote 2 TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screen can be programmed to go blank after a period of inactivity. Touching the screen any- where reactivates it. 3 PLUS - Adjust setting for selected source 4 MINUS - Adjust setting for selected sourc
ملخص المحتوى في الصفحة رقم 10
USER COMPONENT GUIDE SRC2 Remote Control 1 POWER - Turns room or Local Source on and 11 off. 1 2 RUSSOUND DEVICE BUTTON - Used for 2 SRC2 control of zone keypad. 10 3 NUMBER BUTTONS - Buttons (0-9) for direct selection of channels or discs. 3 4 VOLUME UP/DOWN - Raises and lowers the volume for the room you are in, or for the selected Local Device. 5 CURSOR KEYS - Issues IR commands for 9 source equipment, allowing movement 4 through menus and program screens. 6 COMMAND KEYS - Controls the select
ملخص المحتوى في الصفحة رقم 11
USER OPERATION UNO-S1 Keypad Button Function Room On/Off Press and release to turn on the UNO used to enter the User Menu with a press and System Keypad. This also turns on the corre- hold action. (See next page for User Menu) sponding CAM6.6’s room, and any presets previ- Volume Up/Down Buttons ously assigned will be activated, including set- The room’s audio output is adjusted using . tings for bass, volume, last source selected, Command Keys etc. Press and release to turn off the UNO The com
ملخص المحتوى في الصفحة رقم 12
USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the Party Mode command from affecting this room. audio properties and control functions of a par- When another UNO Systems Keypad selects the ticular room. same source, a DND message will scroll on the the LCD panel, alerting the user the source is in To enter or exit the User Menu, press and hold Do Not Disturb mode. during normal operation. The following keys are used to navigate and make changes whil
ملخص المحتوى في الصفحة رقم 13
USER OPERATION UNO-S2 Keypad Button Function Room On/Off Press and release to turn on the UNO used to enter the User Menu with a press and System Keypad. This also turns on the corre- hold action. (See next page for User Menu) sponding CAM6.6’s room, and any presets previ- Volume Up/Down Buttons ously assigned will be activated, including set- The room’s audio output is adjusted using . tings for bass, volume, last source selected, F1 and F2 Buttons etc. Press and release to turn off the UN
ملخص المحتوى في الصفحة رقم 14
USER USER MENU SETTINGS UNO-S2 User Menu Operation The User Menu allows the user to adjust the 7. DO NOT DSTRB - On or Off (default) audio properties and control functions of a par- Do Not Disturb means do not disturb this room ticular room. or selected source. This stops pages from The following keys are used to navigate and being sent to this room, stops an “All Off," "All make changes while using the User Menu: On" or Party Mode command from affecting this room. To enter the User Menu, pre
ملخص المحتوى في الصفحة رقم 15
USER OPERATION UNO-TS2 Touchscreen Button Function Room On/Off Source Select Button To turn on the room and the touchscreen, touch The six buttons in the middle of the touch- the UNO-TS2 screen anywhere, or press and screen’s home page show the six assigned release the power button. Any presets previously names of the sources. To select a source, press assigned will be activated, including settings for the button assigned to that source. To change bass, volume, last source selected, etc. Press
ملخص المحتوى في الصفحة رقم 16
USER USER MENU SETTINGS UNO-TS2 - Setting Preferences The Options button on the home screen brings up Options room setting options and screen adjustments. (For more detailed information, consult the UNO-TS2 Instruction Manual) Features Turn On Volume - This sets the room’s default vol- ume when the room is turned on. Party Mode - When in “PARTY MODE” the system is primarily controlled by a “MASTER” Keypad. Party Mode links all rooms to the same source which is selected by the Master Keypad room.
ملخص المحتوى في الصفحة رقم 17
USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Control through frequencies. The frequency will scroll UNO-S1 Keypad Control of Tuner Selecting the tuner twice on the keypad then stop and display the station’s first 5 characters. On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’s preas- Setting a Memory Preset signed source number (1). The SRC2 remote control is used to set memory presets for all six banks. See page 22 for Selecting the desired frequency details. P
ملخص المحتوى في الصفحة رقم 18
USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control of six called banks, and there are six banks. UNO-S2 Keypad Control of Tuner Selecting the tuner Each preset and each bank can be given a cus- tom name of your choice. On the UNO-S2 keypad, press to select the To select a bank, press and hold for bank AM/FM tuner by choosing the tuner’s preas- up or for bank down. The bank’s name will signed source number (1). be temporarily displayed on the UNO-S2. Banks Selecting the desired band and me
ملخص المحتوى في الصفحة رقم 19
USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control 1 6 92.5 MHz FM 5 2 4 3 1 4 SCAN - (press and hold) Scans through tuned sta- TUNER SELECTION - Select source number tions with 5-second preview before next station assigned to AM/FM TUNER (1) 5 MUTE - Mutes/unmutes tuner audio output 2 TUNE UP/DOWN - Used for manual station selection 6 BANK SELECT - (press and hold) Used for bank selection 3 SELECT - Selects AM or FM band 6 MEM UP/DOWN - (press) Scrolls through memory 4 SEEK - (press)
ملخص المحتوى في الصفحة رقم 20
USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 Touchscreen Control screen. These will be selected from the bank UNO-TS2 Control of Tuner that is currently selected. Selecting the tuner Selecting the desired band On the UNO-TS2 touchscreen home page, press the named source button to select the AM/FM From the “2 of 3” tuner screen, press the “AM” tuner. or “FM” button to select the desired band. Selecting the desired frequency Selecting a Bank From the “2 of 3” tuner screen, enter the 3- or From th
