ملخص المحتوى في الصفحة رقم 1
User's Manual
3 WAY STEREO
MAXIDRIVE3.4 PC DIGITAL CROSSOVER
R
LTO
www.altoproaudio.com
Version 1.5 February 2006
English
ملخص المحتوى في الصفحة رقم 2
Fuse SAFETY RELATED SYMBOLS To prevent fire and damage to the product, use only the recommended fuse type as indicated in this CAUTION manual. Do not short-circuit the fuse holder. Before RISK OF ELECTRIC SHOCK DO NOT OPEN replacing the fuse, make sure that the product is OFF and disconnected from the AC outlet. This symbol, wherever used, alerts you to the pre- Protective Ground sence of un-insulated and dangerous voltages with- in the product enclosure. These are voltages that Before turning t
ملخص المحتوى في الصفحة رقم 3
PREFACE Dear Customer: Thanks for choosing MAXIDRIVE3.4 PC3-Way Stereo Digital Crossover and thanks for choosing one of the results of LTO AUDIO TEAM job and researches. For our LTO AUDIO TEAM, music and sound are more than a job...are first of all passion and let us say our obsession! We have been designing professional audio products for a long time in cooperation with some of the major brands in the world in the audio field. The LTO line presents unparalleled analogue and digital products mad
ملخص المحتوى في الصفحة رقم 4
TABLE OF CONTENTS 1. INTRODUCTION .....................................................................................................................................4 2. FEATURES .............................................................................................................................................4 3. CONTROL ELEMENTS .........................................................................................................................4 3.1 The Front Panel 3.2 The Rear
ملخص المحتوى في الصفحة رقم 5
1. INTRODUCTION Your MAXIDRIVE3.4 PC is a 3-Way Stereo Digital Crossover and it is a powerful versatile signal processor. The apparatus will provide 3, 4, 5 or 6-way mono X-over with 6 outputs. Thanks to the use of selected and expensive components, the performances of MAXIDRIVE3.4 PC are worth much more than its price: you can set the input and output routing configuration through recalling one of the presets included in the internal memory or PC editor software. For further detail, please read
ملخص المحتوى في الصفحة رقم 6
1>. Ensure that power to the MAXIDRIVE3.4 PC and the computer is switch off. 2>. Connect the MAXIDRIVE3.4 PC to the PC's RS232 serial port using a data cable with 9-pin female plugs. The required data cable is known as a 'null modern' (also data transfer) type serial interface cable. Attach the other end to the 9-pin socket situated next to the audio output terminals of the MAXIDRIVE3.4 PC. 3>. Turn on your audio system, including the MAXIDRIVE3.4 PC. Now boot up your computer and run the PC edi
ملخص المحتوى في الصفحة رقم 7
4. GETTING STARTED 4.1 Configuration of the System At first, switch off the equipment, carry out the audio and power connection from the various components of your sound system. Then, connect the main cord and only switch on the MAXIDRIVE3.4 PC. The display will show the data regarding with the operating system release for a few seconds. 1.0 Meanwhile, the system will restore the exact operating conditions at the time of switching off. Click the SEL key to select proper PRESET or ID status. When
ملخص المحتوى في الصفحة رقم 8
2>. When the MAXIDRIVE3.4 PC is connected by its RS485 port to another MAXIDRIVE3.4 PC running as a gate- way the display shows CS (Comm. Slave). CS 4.4 First Steps with the PC Editor To avoid accidentally overwriting an existing PRESET, it is important that you follow the correct routine when ini- tiating a session between the MAXIDRIVE3.4 PC and your computer. 1>. With the MAXIDRIVE3.4 PC powered up and connected to your PC's serial port as described, Run the PC Editor program by selecting the
ملخص المحتوى في الصفحة رقم 9
4.5 Edit Mode (Password Protection) MAXIDRIVE3.4 PC incorporates a password system and your installer may have set a password to ensure that vital settings are not altered. In this case you will NOT be able to alter all of the parameters via the PC Editor. In the PC Editor, select FILE > OPTIONS and then the LOCK tab. This will present you with a menu: Full Edit: This is the DEFAULT mode. No password is set at the factory. From here you can lock the unit by clicking within the empty Partial Lock
ملخص المحتوى في الصفحة رقم 10
NOISE GATE 2 You can set the MAXIDRIVE3.4 PC to cut the signal if it falls below a certain level. Most often used to cut the background noise between music tracks. 3 PARAMETRIC EQUALIZATION (EQ) Each of the channels (both inputs and outputs) has a fully variable 5-band parametric equalizer. MASTER DELAY 4 Allows a delay to be applied to the signal fed from one or both of the input channels. 5 CHANNEL DELAY Allows a delay to be applied in order to "time align" each individual output channel. Incl
ملخص المحتوى في الصفحة رقم 11
3 7 PARAMETRIC EQUALIZATION (EQ) 5-band full parametric equalization is provided on each of the Input and Output channels. The Center Frequency, Gain and Bandwidth are all variable. In addition, the MAXIDRIVE3.4 PC allows you to select from a list of different EQ contours. Freq: The center frequency of each band can be set between approximately 16Hz and 16,000Hz. Gain: The level at the chosen center frequency can be increased or reduced by 15dB. Band: This dictates how the frequencies next to th
ملخص المحتوى في الصفحة رقم 12
CROSSOVER (XOVER) 6 The MAXIDRIVE3.4 PC is equipped with independent High-Pass and Low-Pass filters on each of the 6 output channels. For each filter there are 10 filter type/slope options: Butterworth type with 6dB, 12dB, 18dB or 24dB per octave slope Bessel type with 12dB, 18dB or 24dB per octave slope Linkwitz-Riley type with 12dB, 24dB or 48dB per octave slope The different filter characteristics can be seen on the PC Editor's graphical display. For each of the filters, the crossover point c
ملخص المحتوى في الصفحة رقم 13
What our processor allows us to do is set our preferred upper level it's like having your own DJ poised with her hand over the volume control, ready to turn it down when the music gets uncomfortably loud. And because we have this to automatically control things for us at the top end, we can raise the overall volume level, which incre- ases the level of the softer musical passages. If you would like more information on Dynamic Gain Control and compressor/limiting, including set-up advice, please
ملخص المحتوى في الصفحة رقم 14
Outputs1~6, RS485 OUT 2 HOT (+) 3 BALANCED XLR-F 1 GROUND COLD ( ) RS232 PIN 5 PIN 3 PIN 2 RS232 (9Pin-F) (TXD) PIN2 PIN 3(RXD) (RXD) PIN3 PIN 2(TXD) (GND) PIN5 PIN 5(GND) 9 PIN 9 PIN The wire must be changed between 2,3 pin. Special attentions for RS232 interface: 1. Be careful not to use the pin-to-pin cable in the system, it may damage the communication part of this unit. 2. Be sure to use the female connector on both sides of the cable. 3. The length of this cable must not exceed 30 meters,
ملخص المحتوى في الصفحة رقم 15
ملخص المحتوى في الصفحة رقم 16
ملخص المحتوى في الصفحة رقم 17
ملخص المحتوى في الصفحة رقم 18
ملخص المحتوى في الصفحة رقم 19
e. Communications: PC & one or more MAXIDRIVE3.4 PC connection to/from RS232 Serial Port MAXIDRIVE3.4 PC 3-WAY STEREO to/from DIGITAL CROSSOVER Rs232 (Front panel) AC INPUT 14W PUSH PUSH PUSH OUTPUTS 95-240V 50/60Hz FUSE: 95-120V T500mAL 210-240V T315mAL NEW TIDE NEW TIDE NEW TIDE Apparaten skall anslutas till 3 jordat uttag nar den ansluts 2 1 2 1 21 till ett natverk 3 3 A102 RS485 OUT RS485 IN 6 5 4 3 21 INPUT B INPUT A From RS485 OUT to RS485 IN AC INPUT 14W PUSH PUSH PUSH OUTPUTS 95-240V 50/
ملخص المحتوى في الصفحة رقم 20
9. TECHNICAL SPECIFICATIONS INPUT section Connectors 2 x COMBO Nominal input sensitivity 0 dB (0.775 V) Input Impedance 30kOhm, electronically balanced Maximum Input Level +20dBu Input Gain -30 / +6 dB variable in 0.5 dB steps Output Section Connectors 6 x XLR-M Output Impedance 600 Ohms, electronically balanced Nominal Output Level 0 dBu Maximum Out put Level +20 dBu Output Gain -30 / +6 dB variable in 0.5 dB steps DSP Section A/D converters 20 bit D/A converters 20 bit Internal dynamics 40 bit
