ملخص المحتوى في الصفحة رقم 1
RX-V2600
RX-V2600_GB-cv.fm Page 1 Thursday, August 25, 2005 11:17 AM
GB
RX-V2600
AV Receiver
Ampli-tuner audio-vidéo
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
© 2005 All rights reserved.
MANUALE DI ISTRUZIONI
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA MANUAL DE INSTRUCCIONES
YAMAHA ELECTRONIK EUROPA G.m.b
ملخص المحتوى في الصفحة رقم 2
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual 18 Before moving this unit, press MASTER ON/OFF to release it carefully. Keep it in a safe place for future reference. outward to the OFF position to turn off this unit, the main room, Zone 2 and Zone 3 and then disconnect the AC power 2 Install this sound system in a well ventilated, cool, dry, clean plug from the AC wall outlet. place – a
ملخص المحتوى في الصفحة رقم 3
BASIC SOUND FIELD ADDITIONAL ADVANCED English OPERATION PROGRAMS INFORMATION INTRODUCTION PREPARATION OPERATION CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 EDITING SOUND FIELD PARAMETERS ......56 GETTING STARTED............................................ 3 What is a sound field? ............................................. 56 Changing parameter settings ................................... 56 Supplied accessories .........
ملخص المحتوى في الصفحة رقم 4
FEATURES FEATURES Built-in 7-channel power amplifier Radio Data System ◆ Minimum RMS Output Power (U.K. and Europe models only) (0.04% THD, 20 Hz to 20 kHz, 8 Ω) ◆ Radio Data System tuning capability Front: 130 W + 130 W Other features Center: 130 W ◆ YPAO (YAMAHA Parametric Room Acoustic Surround: 130 W + 130 W Optimizer) for automatic speaker setup Surround Back: 130 W + 130 W ◆ 192-kHz/24-bit D/A converter Sound field features ◆ GUI (graphical user interface) menus that allow you to ◆ Prop
ملخص المحتوى في الصفحة رقم 5
English INTRODUCTION GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control POWER POWER STANDBY POWER TV AV A A XM B AUDIO SEL SLEEP PHONO PHONO TUNER TUNER C CD D MUL MULTI CH IN TI CH IN Zone 2/Zone 3 V V- -AU AUX X CBL/SA CBL/SAT T MD/T MD/TAPE APE CD-R CD-R remote control DTV DTV VCR 1 VCR 1 D DVR/VCR2 VR/VCR2 DV DVD D POWER SELECT TUNER CD CD-R STANDBY AMP Batteries (x6) 1 2 3 + + + DTV CBL/SAT MD/TAPE PHONO SOURCE (A
ملخص المحتوى في الصفحة رقم 6
GETTING STARTED Installing batteries in the remote controls Notes Change all of the batteries if you notice conditions such as the operation range of the remote control decreases, the indicator does not flash, or its light or display window become dim. Do not use old batteries together with new ones. Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and co
ملخص المحتوى في الصفحة رقم 7
English INTRODUCTION GETTING STARTED Handling the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. PURE DIRECT VOLUME SELECT AUDIO MUL INPUT TI CH A/B/C/D/E PRESET/ TUNING PRESET/ TUNING FM/AM MEMORY TUNING MODE STRAIGHT CONTR TONE OL EDIT MAN'L/AUTO FM AUTO/MAN'L EFFECT MAIN ZONE INPUT SPEAKERS ZONE ON/OFF ZONE CONTROL DVD SOURCE/ REMOTEMD/TAPE PROGRAM DTV CD-R MULT
ملخص المحتوى في الصفحة رقم 8
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 12 345 6 7890ABC DE F PURE DIRECT VOLUME AUDIO MULTI CH PRESET/ PRESET/ TUNING TONE SELECT INPUT A/B/C/D/E TUNING TUNING FM/AM MEMORY MODE STRAIGHT CONTROL EDIT MAN'L/AUTO FM AUTO/MAN'L EFFECT MAIN ZONE INPUT SOURCE/ SPEAKERS ZONE ON/OFF ZONE CONTROL REMOTE DVD MD/TAPE PROGRAM MULTI ZONE DTV CD-R A B ZONE 2 ZONE 3 CBL/SAT CD VCR 1 PHONO YPAO SILENT CINEMA S VIDEO VIDEO L AUDIO R OPTICAL ON/OFF DVR/ TUNER VCR 2 V-AUX REC OUT/ZONE 2 OPTIMI
ملخص المحتوى في الصفحة رقم 9
English INTRODUCTION CONTROLS AND FUNCTIONS 8 Front panel display H OPTIMIZER MIC jack Shows information about the operational status of this Use to connect the supplied optimizer microphone to run unit. AUTO SETUP (see page 32). 9 PRESET/TUNING (EDIT) I SPEAKERS A/B Switches the function of PRESET/TUNING l / h Turn on or off the set of front speakers connected to the between selecting preset station numbers and tuning when SPEAKERS A and/or B terminals on the rear panel each TUNER is selecte
ملخص المحتوى في الصفحة رقم 10
CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the 1 Infrared window remote control used to control this unit. Set AMP/ Outputs infrared control signals. Aim this window at the SOURCE/TV to AMP to operate this unit. To operate component you want to operate. other components, see “REMOTE CONTROL 2 Transmission indicator FEATURES” on page 96. Flashes while the remote control is sending infrared signals. 1 B 3 Input selector buttons 2 POWER POWER PO
ملخص المحتوى في الصفحة رقم 11
English INTRODUCTION CONTROLS AND FUNCTIONS B STANDBY J MUTE Sets this unit, Zone 2 and Zone 3 to the standby mode (see Mutes the sound. Press again to restore the audio output to page 30). the previous volume level. K PURE DIRECT Note Turns on or off the PURE DIRECT mode (see page 42). This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position. L EXIT Exits the GUI mode. C POWER Turns on this unit, Zone 2 and Zone 3 (see page 30). M NIGHT Turns
ملخص المحتوى في الصفحة رقم 12
CONTROLS AND FUNCTIONS Zone 2/Zone 3 remote control This section describes the function of each control on the 1 Input selector buttons Zone 2/Zone 3 remote control used to control Zone 2 or Select the desired input source of Zone 2 or Zone 3 and Zone 3. change the control area. 2 PRESET +/– Selects the preset station number (1 to 8) when TUNER is POWER selected as the input source or Zone 2 or Zone 3. 5 STANDBY TUNER CD CD-R 3 A/B/C/D/E 1 2 3 6 Selects the preset station group (A to E) when
ملخص المحتوى في الصفحة رقم 13
English INTRODUCTION CONTROLS AND FUNCTIONS Front panel display Note The XM indicator is only applicable to the U.S.A. model. 123 4 5 6 7 890A V-AUX DVR/VCR 2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD-R CD PHONO TUNER XM STEREO TUNED DIGITAL AUTO MEMORY PL x YPAO HiFi DSP CS CS dB PS EX ZONE2 VOLUME MUTE PTY ZONE3 SP RT 96/24 NIGHT A B L L C R CT SLEEP DISCRETE 96 EON SILENT VIRTUAL LFE SL SB SR PCM MATRIX 24 PTY HOLD CINEMA BCD E FG H I JK LMNO P 1 YPAO indicator A MEMORY indicator Lights up when the
ملخص المحتوى في الصفحة رقم 14
CONTROLS AND FUNCTIONS J 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. K LFE indicator Lights up when the input signal contains an LFE signal. L Input channel and speaker indicators Input channel indicators Indicate the channel components of the current digital input signal. L L C R SL SB SR Presence and surround back speaker indicators Light up according to the number of presence and surround back speakers set for Presence (see page 85) and Surround Back (see page
ملخص المحتوى في الصفحة رقم 15
English INTRODUCTION CONTROLS AND FUNCTIONS Rear panel 12 3 4 56 7 8 90 DIGITAL INPUT COMPONENT VIDEO VIDEO AUDIO AUDIO CONTROL OUT TUNER COAXIAL S VIDEO VIDEO R L R L Y PB PR +12V 15mA MAX. FM ANT GND AM ANT (PLAY) 75Ω DVD AC IN IN UNBAL. DVD 1 2 CD DVD DVR/ MD/TAPE REMOTE WRENCH VCR 2 DTV HOLDER SPEAKERS OPTICAL + – – + CD DTV IN R A L OUT (REC) 1 CBL/ (PLAY) SAT IN CBL/ OUT DVD SAT CD-R FRONT CENTER + – – + – + GND B DTV IN IN RS-232C OUT (REC) MONITOR OUT VCR 1 2 IN 1 OUT CBL/SAT OUT CD S
ملخص المحتوى في الصفحة رقم 16
CONNECTIONS CONNECTIONS Surround speakers (SR and SL) Before connecting speakers The surround speakers are used for effect and surround sounds. Place these speakers behind your listening * The speaker layout below shows the standard ITU-R position, facing slightly inwards, about 1.8 m above the speaker setting. You can use it to enjoy CINEMA DSP, floor. multi-channel audio sources and THX. Surround back speakers (SBR and SBL) * The surround back speakers supplement the surround ITU-R is th
ملخص المحتوى في الصفحة رقم 17
English PREPARATION CONNECTIONS ■ Di-pole speaker layout Connecting speakers Either di-pole or direct radiating speaker types can be used for THX surround. If you choose di-pole speakers, please Be sure to connect the left channel (L), right channel (R), place the surround and surround back speakers according “+” (red) and “–” (black) properly. If the connections are to the speaker layout below. faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection
ملخص المحتوى في الصفحة رقم 18
CONNECTIONS 1 Remove approximately 10 mm of insulation 5 Tighten the knob to secure the wire using the from each of the speaker cables. supplied speaker terminal wrench. Speaker terminal wrench 10 mm 2 Twist the exposed wires of the cable together to prevent short circuits. Red: positive (+) Black: negative (–) 6 Hook the speaker terminal wrench onto WRENCH HOLDER on the rear panel of this unit when not in use. 3 Loosen the knob using the supplied speaker terminal wrench. Speaker terminal w
ملخص المحتوى في الصفحة رقم 19
English PREPARATION CONNECTIONS PRESENCE/ZONE 2(3) terminals ■ Speaker layout Connect presence speakers to these terminals. Refer to the following illustration as to where to place each speaker in your listening room. Note 9 You can also use these terminals to connect the Zone 2 speakers (see page 109). 10 2 4 1 Open the tab. 1 7 3 5 8 6 1 Subwoofer 2 Insert one bare wire into the hole of each 2 Front right speaker terminal. 3 Front left speaker 4 Center speaker 5 Surround back right speaker
ملخص المحتوى في الصفحة رقم 20
CONNECTIONS Front speakers (A) Right Left Subwoofer with built-in amplifier Center Front speaker speakers (B) (General model) SPEAKERS + – – + R L A FRONT CENTER + – – + – + B SPEAKER IMPEDANCE PRE OUT FRONT SURROUND/ZONE 2(3) + – – + R L R L R SURROUND L R L + SUBWOOFER CENTER + – – + R L – SINGLE (SB) SINGLE R L SURROUND BACK PRESENCE/ZONE 2(3) SURROUND BACK/PRESENCE Right Left Right Left Right Left Surround speakers Surround back speakers Presence speakers You can connect both surr
