Crestron electronic GLS-ODT-C-500. GLS-ODT-C-1000 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DESCRIPTION
OPTION B. Drop Ceiling Installation Using Screws (Cont’d) MOUNTING/MASKING LOCATION DIAGRAM
Crestron GLS-ODT-C-500/1000/2000
The supplied masks mount in the sensor front cover. The half mask is supplied
The Occupancy Sensor is a low-voltage infrared and ultrasonic sensor that works with the
DUAL-TECHNOLOGY CEILING MOUNTED 5. Connect low voltage wires from the GLS-SIM or other Crestron device as shown in the
pre-mounted to demonstrate the mounting method. The perforated mask has t

ملخص المحتوى في الصفحة رقم 2

OPERATION DIP Switch Settings Field-of-View Ranges - GLS-ODT-C-500 TROUBLESHOOTING SWITCH SWITCH FUNCTIONS SWITCH SETTINGS TOP VIEW The descriptions below refer to a system which has been configured to turn the lights 20 Bank A OFF ON on when a room or area is occupied, and turn them off when the room or area is The following table provides corrective action for possible trouble situations. If further A1 Single/Dual-Tech Mode Dual-Tech Single Tech vacate