System Sensor EM-1RI دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

I56-2023-004
INSTALLATION AND MAINTENANCE INSTRUCTIONS
3825 Ohio Avenue, St. Charles, Illinois 60174
1-800-SENSOR2, FAX: 630-377-6495
EM-1RI Relay Module
www.systemsensor.com
SPECIFICATIONS
Normal Operating Voltage: 15 to 30 VDC
Standby Current: 500 µA max. average (continuous broadcasts)
Alarm Current: 2.0 mA (red LED on)
Short Circuit Current
Dry Control Input: 30 µA max. Avg. (5VDC)
Maximum Resistance
Dry Contact Input: 100 Ω
Temperature Range: 32°F to 120°F (0°C to 49°C)
Humidity: 10 to 93

ملخص المحتوى في الصفحة رقم 2

In order to control which devices are addressed first in wiring WIRING configurations with branches, a branch marker can be set at a NOTE: All wiring must conform to applicable local codes, ordi- particular device. A branch marker is an electronic value from 0 to nances, and regulations. 255 stored in the device memory. The branch markers are set with 1. Install module wiring in accordance with the job drawings the IR configuration tool, EA-CT. and appropriate wiring diagrams. TERMINAL DE