Accton Technology ETHERHUB 24S دليل المستخدم

ملخص المحتوى في الصفحة رقم 5

EtherHub-24s Quick Installation Guide Verifying Hub Status Input Power 100~240 VAC, 50/60 Hz (built-in full-range power module) Power Consumption 15 Watts maximum Check each connection by comparing the indicators with the following table. Maximum Current 0.11A max. @ 110V, 0.05 max. @ 240V RMS RMS LED State Indication Heat Dissipation 51 BTU/hr Pn owerO. Hub receiving power Temperature 0°C to 50°C (32 to 122°F) Standard Operating Cn ollision%O. Indicates percentage of collisions out of total pac

ملخص المحتوى في الصفحة رقم 6

EtherHub-24s Quick Installation Guide Power and Cooling Problems limits for a Class A digital device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when If the power indicator does not turn on when the power cord is plugged in, you operated in a commercial environment. Operation of this equipment in a residential area may have a problem with the power outlet, power cord, or internal power is likely to cause interferen

ملخص المحتوى في الصفحة رقم 7

EtherHub-24s Quick Installation Guide Safety Compliance Warranty Underwriters Laboratories Inc. (USA) Accton warrants to the original owner that the product delivered in this package will be free from defects in material and workmanship for three Important! Before making connections, make sure you have the correct Cord Set. years. For the warranty to apply, you must register your purchase by returning Check it (read the label on the cable) against the following specification list. the registra

ملخص المحتوى في الصفحة رقم 1

EtherHub-24s
Quick Installation Guide
EH2024
E1298-R02
150153-101

ملخص المحتوى في الصفحة رقم 2

Copyright © 1998 by Accton Technology Corporation. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Accton Technology Corporation. Accton makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. Accton reserves the right to make revis

ملخص المحتوى في الصفحة رقم 3

EtherHub-24s Quick Installation Guide Introduction Contents The EtherHub-24s includes 24 RJ-45 ports, 1 BNC port for connection to thin Ethernet (10BASE2), and 1 AUI port for connection to a variety of media types Introduction 1 including 10BASE5 or fiber (using a suitable transceiver). Package Contents 1 With these options, you can easily link the hub to a thin or thick Ethernet backbone, or connect to a remote office. The Description of Hardware 1 hub also has an indicator panel that includes

ملخص المحتوى في الصفحة رقم 4

EtherHub-24s Quick Installation Guide Stacking Hubs on a Flat Surface Making a Connection via the MDI Daisy-Chain Port This hub can be stacked anywhere 1. To make a direct connection to a compatible hub or switch, use the MDI there is a enough flat space, such as daisy-chain port (Port 24). When connecting to this port, remember to set on a table or desktop. the port selection switch to MDI. You can also connect any RJ-45 (MDI-X) port on the hub to an MDI daisy-chain port on the other device.