Belkin دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Introduction Connecting the Keyboard, Video, and Mouse to the Console Ports on the Switch Connecting Computers to the Switch
1 2
1. Power down all computers. 3. Take the video cable that is attached to your monitor and connect it to the 1. Using an OmniView KVM Cable kit,
This sheet will guide you through the basic steps needed to install the
VGA OUT port located on the side of the Switch. take the VGA cable and connect the
2-Port KVM Switch (the Switch). If you have any problems during
2. Conn

ملخص المحتوى في الصفحة رقم 2

Power on your Computers Connecting Computers to the KVM Switch 2 3 Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA 3. Connect one end of the PS/2 mouse KVM cable to the mouse port on You are now ready to use your Switch. Tel: 310.898.1100 your computer and the other end to the MOUSE 1 port on the side of Please refer to your User Manual for additional information. Fax: 310.898.1111 2-Port KVM Switch the Switch. Belkin Components, Ltd. Express Business Park • Shipton Way •