ملخص المحتوى في الصفحة رقم 1
Corporate Headquarters
Magnum CSG14 Gigabit Converter Switches
GarrettCom, Inc.
CSG14U
47823 Westinghouse Drive
Fremont, CA 94539-7437
Phone (510) 438-9071
Fax (510) 438-9072
Website: http://www.GarrettCom.com
CSG14
Email: support@garrettcom.com
Installation and User Guide
www .. GarrettCom com www .. GarrettCom com
ملخص المحتوى في الصفحة رقم 2
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) TM Magnum CSG14 Series Gigabit Converter Switch Installation and User Guide Part #: 84-00102Z Rev. G Trademarks GarrettCom is a registered trademark and Magnum, Dymec, DynaStar, Personal Switch, Link-Loss-Learn, S-Ring, Convenient Switch and Converter Switch are trademarks of GarrettCom, Inc. Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registered trademar
ملخص المحتوى في الصفحة رقم 3
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Important: The Magnum CSG14 Series 10/100/1000 Mb/s Converter Switches contain no user serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. If problems are experienced with Magnum CSG14 10/100/1000 Mb/s Converter Switch products, consult Section 5, Troubleshooting, of this User Guide. Copyright © 2008 GarrettCom, Inc. All rights reserved. No part of this p
ملخص المحتوى في الصفحة رقم 4
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications
ملخص المحتوى في الصفحة رقم 5
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Electrical Safety requirements: 1. This product is to be installed Only in Restricted Access Areas (Dedicated Equipment Rooms, Electrical Closets, or the like). 2. 48VDC products shall be installed with a readily accessible disconnect device in the building installation supply circuit to the product. 3. This product shall be provided with a maximum 10A DC Listed fuse or circuit breaker in the supply circuit whe
ملخص المحتوى في الصفحة رقم 6
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Drive Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom.com Email: support@garrettcom.com www .. GarrettCom com v
ملخص المحتوى في الصفحة رقم 7
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications ...................................................................... 1 1.2 Summary of models and descriptions: ............................................... 11 2.0 INTRODUCTION ...................................................................
ملخص المحتوى في الصفحة رقم 8
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) 3.4 DIN-Rail mounting option ................................................................. 49 3.5 Power Requirements for CSG14 Series Switches .............................. 50 3.6 Powering the CSG14 with 12V, 24V or –48VDC power input ......... 51 3.7 CSG14 Series, DC-powered, -48, 24 and 12VDC Installation ........ 53 3.8 Connecting Ethernet Media .......................................................
ملخص المحتوى في الصفحة رقم 9
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) 5.0 TROUBLESHOOTING ...................................................................... 66 5.1 Before Calling for Assistance ............................................................ 67 5.2 When Calling for Assistance ............................................................. 68 5.3 Return Material Authorization (RMA) Procedure ............................. 70 5.4 Shipping and Packaging Information ...
ملخص المحتوى في الصفحة رقم 10
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) 1.0 SPECIFICATIONS 1.1 Technical Specifications Ports Performance Data Rate: 10Mbps, 100Mbps, 1000Mbps Network Standards 1000Mb: Ethernet IEEE 802.3ab and 802.3z 1000Base-T, -SX, -LX and -ZX 100Mb: Ethernet IEEE 802.3u, 100BASE-TX, 100BASE-FX 10 Mb: Ethernet IEEE 802.3, 10BASE-T Auto-sensing for speed: IEEE 802.3z Packet-Processing Between Domains Filter and
ملخص المحتوى في الصفحة رقم 11
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Packet buffers memory: 64KB, dynamically shared on all domains Latency (not including packet time): 1000 to 1000Mbps: <3 μs 100 to 100Mbps: <5 μs 10 to 10Mbps: <18 μs 100 to 10 Mbps: <5 μs 10 to 100Mbps: <15 μs Path Delay Value: 50 BT on all ports Maximum Ethernet Segment (or Domain) Lengths 10BASE-T (Unshielded twisted pair) 100 m (328 ft) 10BASE-FL, Fiber optic 2 km (6,562 ft) 10BASE-FL, Sing
ملخص المحتوى في الصفحة رقم 12
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) 1000BASE-LX, full duplex, single-mode (9um) 5 km (16404 ft) 1000BASE-ZX, full duplex, single-mode (9um) >70 km (229,659 ft) Operating Environment CSG14H / CSG14UH: -13ºF to 140ºF (-25ºC to 60ºC) Long term per agency tests (UL) -40ºF to 185ºF (-40ºC to 85ºC) Short term per IEC Type tests CSG14P / CSG14UP: -40ºF to 167ºF (-40ºC to 75ºC) Long term per agency tests (UL) -40ºF
ملخص المحتوى في الصفحة رقم 13
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Note: CSG14 models are designed for NEBS compliance, including, vibration, shock and altitude. Packaging: Enclosure: Rugged sheet metal (Aluminum) Dimensions of the Switch unit: 3.5 in H x 3.0 in W x 1.0 in D (8.9 cm x 7.6 cm x 2.5 cm) Weight: CSG14H / CSG14P: 9 oz. (255g) CSG14UH / CSG14UP: 6.1 oz. (173g) Power supply, –Hd, and Hi: 5.8 oz (165g) –Pd, and -Pi: 7.9
ملخص المحتوى في الصفحة رقم 14
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) POWER SUPPLY AC POWER SUPPLY (using an external power adapter): All models have a (8-15) VDC output with 6ft long cord and a 2.5mm center +ve jack. The power supplies are temperature rated to match the Converter Switch ratings. Factory Floor (H) Ratings (-25 to 60°C) North America (-Hd) models. Hardened, factory floor temperature rated. Input: 6ft AC power cord to IEC 320 connector on the 100-240vac 47-63Hz extern
ملخص المحتوى في الصفحة رقم 15
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Temperature un-controlled Premium (P) Ratings (-40 to 75°C) North America (-Pd) models. Outdoor temperature rated. Input: 6ft AC power cord to IEC 320 connector on the100- 240vac 47-63Hz external power adapters. Output: 12vdc, 2Amps. International (-Pi) models. Outdoor temperature rated. Input: IEC 320 connector on the 100-240vac 47-63Hz external power adapter. Requires a user supplied power cord. Output: 12vdc
ملخص المحتوى في الصفحة رقم 16
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Power Consumption: See Section 3.6. Note 1: the 8-15V DC jack can be used for dual source DC input using an AC adapter and the DC terminal block. Power supply protection is provided by internal diodes. Note 2: The Direct DC power floats. The user may ground either “+” or “-” if desired. Port Connectors (CSG14H / CSG14P: Two RJ-45 Ports: supports 10/100/1000Mbps with auto cross (MDIX). They are shielded 8-pin f
ملخص المحتوى في الصفحة رقم 17
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Switches (CSG14H / CSG14P) Fiber port default is FDX (Full-Duplex) RJ45’s are triple-speed auto-negotiating Switches (CSG14UH / CSG14UP) Each SFP port is factory set to Gb speed User may select 100Mb speed via DIP switch on the back of the unit Each SFP port is individually speed-selectable NOTE: After changing the speed switch setting, power cycle the unit for the speed setting to take effect. www
ملخص المحتوى في الصفحة رقم 18
PORT 1 PORT 2 PORT 3 CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) LED Indicators (Two sets) top-front and end with ports Top-Front: (shown) POWER: Steady ON when power applied Gb per port: Steady ON for 1000Mbps; OFF for 100Mbps or 10Mb speed Gb LK/ACT per port: Steady ON for LINK (LK) with no LK/ACT traffic, BLINKING for Activity POWER End with Ports: POWER: Steady ON when power applied Gb 10/100/Gb per RJ45 port: Steady ON for 100Mb,
ملخص المحتوى في الصفحة رقم 19
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) Mounting options Metal mounting clips for panel mounting: included DIN-Rail mounting option: Model # DIN-RAIL MC2 (see Section 3.4) Rack-mount option: MC14-TRAY, see http://www.garrettcom.com/mc_tray.htm Mean Time Between Failure (MTBF) – over15 years, Telcordia (Bellcore) Method Agency Approvals and Standards Compliance: UL Listed (UL 60950), cUL, CE, Emissions meets FCC Part 15 Class A. NEBS L3 and ETSI c
ملخص المحتوى في الصفحة رقم 20
CSG14 Series Gigabit Converter Switch Installation and User Guide (05/09) 1.2 Summary of models and descriptions: CSG14H (Hardened Model) for 1000Mb fiber CSG14H-ff-Hd, Hi = Hardened (H), two 10/100/1000Mb RJ-45+ one 1000Mb Fiber port for factory floor (-25 to 60C) using a direct DC ( 8-15VDC) and/or external AC hardened power supply (included). CSG14H-ff-12VDC = Same as CSG14H model, except AC hardened power supply is not included CSG14H-ff-24VDC = Same as CSG14H-12VDC model,
