ملخص المحتوى في الصفحة رقم 1
Corporate Headquarters
GarrettCom, Inc.
Magnum S14 Convenient Switch
47823 Westinghouse Dr.
Fremont, CA 94539 &
Phone (510) 438-9071
PS14P Power Source Switch (PoE)
Fax (510) 438-9072
(Members of the Converter Switches family)
Website: http://www.GarrettCom.com
email support@garrettcom.com
Installation and User Guide
www .. GarrettCom com www .. GarrettCom com
ملخص المحتوى في الصفحة رقم 2
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Magnum ™ S14 & PS14P (PoE) Convenient Switches Installation and User Guide Part #: 84-00100 Rev. B (01/06) Trademarks GarrettCom, Magnum, Link-Loss-Learn, S-Ring, Convenient Switch and Converter Switch are trademarks and Personal Hub is a registered trademark of GarrettCom, Inc. Ethernet is a trademark of Xerox Corporation NEBS is a registered trademark of Telcordia Technologies UL is a registered trademark of
ملخص المحتوى في الصفحة رقم 3
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications
ملخص المحتوى في الصفحة رقم 4
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom.com Email: support@garrettcom.com www .. GarrettCom com iii
ملخص المحتوى في الصفحة رقم 5
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications ..................................................................... 1 2.0 INTRODUCTION ............................................................................... 11 2.1 Inspecting the Package and the Product.....................................
ملخص المحتوى في الصفحة رقم 6
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 3.7 S14H & S14P, DC-powered, Installation ......................................... 52 3.7.1 Power Requirement for PS14P(PoE) Power Source Switch.......... 54 3.8 Connecting Twisted Pair (RJ-45 ports).............................................. 55 3.8.1 Connecting Twisted Pair ( Unshielded or Shielded)................. 56 3.8.2 Connections to NICs which support Auto-Neg RJ-45 ports...... 57 4.0 OPERATION ....
ملخص المحتوى في الصفحة رقم 7
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 10/04: Small edit and updates on power supply option. 09/04: Small edit and updates on UL. 06/04: Small revision of the Agency Approvals Rev A 03/04: Initial release of this user manual for the S14 Converter Switch GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or model offerings without notice. www .. GarrettCom com vi
ملخص المحتوى في الصفحة رقم 8
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 1.0 SPECIFICATIONS 1.1 Technical Specifications Ports Performance When a port is operating at 100Mbps: Data Rate: 100Mbps When a port is operating at 10 Mbps: Data Rate: 10 Mbps Network Standards 100Mb: Ethernet IEEE 802.3u, 100BASE-TX, IEEE 802.1p 10 Mb: Ethernet IEEE 802.3, 10BASE-T Power Over Ethernet: IEEE 802.3af
ملخص المحتوى في الصفحة رقم 9
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Packet-Processing Between Domains Filter / Forwarding Rate from 100Mbps ports: 148,800 pps max Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max. Processing type: Store and Forward, non-blocking Auto-learning: 2K address table Address buffer age-out time: 300 sec. Packet buffers memory: 128KB,dynamically shared on all domains (Non-blocking switching) Latency (not including
ملخص المحتوى في الصفحة رقم 10
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Operating Environment Ambient Temperature (S14): 32ºF to 104ºF (0ºC to 40ºC) (S14H): -13ºF to 140ºF (-25ºC to 60ºC) Long term per independent agency tests (UL) -40ºF to 167ºF (-40ºC to 75ºC) Short term per IEC Type tests (S14P & PS14P): -40ºF to 185ºF (-40ºC to 85ºC) Long term per independent agency tests (UL) -40ºF to 167ºF (-40ºC to 7
ملخص المحتوى في الصفحة رقم 11
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Note: H and P models are designed for NEBS compliance, including, vibration, shock and altitude. Packaging: Enclosure: Robust sheet metal (Steel). Dimensions, Switch unit: Height x Width x Depth S14, S14H, S14P & PS14P: 3.5 in H x 3.0 in W x 1.0 in D (8.9 cm x 7.6 cm x 2.5 cm) Weight: all S14 models: 4.6 oz. (130g); power supply, –d, and i: 5.9 oz (170g)
ملخص المحتوى في الصفحة رقم 12
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) POWER SUPPLY (S14 Model only) These products are intended to be supplied by a Listed, Direct Plug-In power unit, marked “Class 2”, or a Listed ITE Power Supply, marked “LPS”, which has suitably rated output voltage (i.e. 9vdc, 12vdc, 24vdc, 48vdc), and suitably rated output current (i.e. 100mA to 500mA).When connected to a 48 V centralized dc source these products shall be provided with a Listed 5 A DC fuse in the
ملخص المحتوى في الصفحة رقم 13
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) DC to unit: 12V DC, 2.5mm jack, center +ve, 6ft. cord Power Supply ( Direct DC ): built-in screw terminal block for +, -, ground. The 12V DC jack is also present. 12V DC internal (range of 8.0 to 15V DC), 24V DC internal (range of 18 to 36V DC) -48V DC internal (range of 36 to 60V DC) t. Power Consumption: 3 watts typic
ملخص المحتوى في الصفحة رقم 14
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Terminal block for -48v DC input (range of 46 to 60V dc), built in for +, - , ground. The 8- 15V DC jack is also present, but it can only be used to power the PS14P unit itself, not PoE devices attached. POWER OUTPUT: (PS14P(POE) unit only) PoE available on all four RJ-45 ports via Ethernet twisted pair cabling on port pins using spare pairs 4,5(+) 7,8(-), not the data pair 1,2(-), 3,6(+) 802,3af Power Consumption
ملخص المحتوى في الصفحة رقم 15
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) LED Indicators (Dual- front and end, port #4 has front only) POWER: Steady ON when power applied (S14 model) ON for -48V power applied to the PS14P unit PoE, ports 1,2,3,4: ON when delivering power (PS14P) 10/100: = 100Mbps; OFF = 10 Mbps LK/ACT: Steady ON for LINK with no traffic, blinking indicates port is transmitting / receiving. F/H: ON = full-duplex, OFF = half-duplex Mounti
ملخص المحتوى في الصفحة رقم 16
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Agency Approvals and Standard Compliance: UL Listed (UL 60950), cUL, CE, Emissions meet FCC Part 15, Class A. NEBS L3 and ETSI compliant H & P models: IEEE P1613 Env. Std for Electric Power Substations P model: NEMA TS-2 and TEES for traffic control equipment P model: designed for UL 2043 above-the-ceiling installation IEC61850 EMC and Operating Conditions Class C for Power Substations Designed for
ملخص المحتوى في الصفحة رقم 17
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 1.2 Summary of models and descriptions: S14-d,i = four 10/100 RJ-45 ports Switch, for office and wiring closet env., ext. AC Pwr Supply S14H-Hd, Hi = Hardened, four 10/100 RJ-45 ports Switch, Factory floor, Int. 8-15VDC, Ext. AC Hardened power supply included . S14H-12VDC = Same as S14H model, except Ext. AC Hardened power supply not included S14H-24VDC = Same as S14H-12VDC model, except for 24VDC power
ملخص المحتوى في الصفحة رقم 18
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Magnum PS14P (PoE) Power Source Switch (model and descriptions) PS14P = ,Premium rated, four 10/100 RJ-45 ports Switch in a compact package, rated for un- controlled(outdoor) env. All four RJ-45 Ethernet ports support Power Source PoE as per the IEEE 802.3ad standard. Includes integral -48V DC terminal block for power unit. NOTE: If you want a heavy-duty Industrial power supply that plugs into AC and delivers
ملخص المحتوى في الصفحة رقم 19
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 2.1 Inspecting the Package and the Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier immediately of any damage which you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included. This package should contain: 1 Magnum S14-Series or PS14P Switch Unit
ملخص المحتوى في الصفحة رقم 20
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) Remove the Magnum S14-Series Switch from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date. In the event there are items missing or damaged contact your supplier. If you need to return the unit use the original shipping container. Refer to Section 5 Troubleshooting, for specific return procedures. 2.2 Product Description The Magnum S14 family of
