ملخص المحتوى في الصفحة رقم 1
10/100Mbps
Fast Ethernet Switch
SW-502/SW-802
User's Manual
ملخص المحتوى في الصفحة رقم 2
Trademarks Copyright © PLANET Technology Corp. 2005. Content subjects to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a p
ملخص المحتوى في الصفحة رقم 3
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communicatio
ملخص المحتوى في الصفحة رقم 4
1. INTRODUCTION 1.1 Package Contents Check the contents of your package for following parts: Fast Ethernet Switch x1 User's manual x1 Power adapter x1 If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair. 1.2 How to Use This Manual This Fast Ethernet Switch User Manual is structured as fo
ملخص المحتوى في الصفحة رقم 5
100Base-TX 5/8-port 10/100Mbps Auto-Negotiation ports - 10/20Mbps, 100/200Mbps Auto-sensing Compact size design for wall mount or desktop placement High performance Store-and-Forward Switching Architecture Runt and CRC filtering Flow control (Back Pressure) supports in half-duplex mode 1K MAC Address Table, automatically learning and aging LED indicators array for easy diagnostic, troubleshooting Plug-and-Play Installation Auto-MDI/MDIX on each port
ملخص المحتوى في الصفحة رقم 6
1.4 Product Specifications Model SW-502 SW-802 Hardware Specification Network Ports 5 10/100Base-T RJ-45 8 10/100Base-T RJ-45 MDI/MDI-X ports MDI/MDI-X ports Dimensions (W x D x H) 159 x 100 x 28mm Weight (KG) 0.16 KG 0.18 KG Power Requirement External Power adapter 12V 500 mA Switch Specification Switch Architecture Store-and-forward Address Table 1K entries, auto learning/ageing Flow Control IEEE 802.3x full duplex operating and flow control Packet Control Runt & CRC filtering, Bro
ملخص المحتوى في الصفحة رقم 7
2. INSTALLATION This section describes the functionalities of the Fast Ethernet Switch’s components and guides how to install it on the desktop. Basic knowledge of networking is assumed. Please read this chapter completely before continuing. 2.1 Product Description With concepts of "Easy to Install and use", "Compact-sized design", and "Simple troubleshooting", PLANET SW-502/SW-802 provides cost-conscious business and home users with the foundation of an integrated system of small-offic
ملخص المحتوى في الصفحة رقم 8
This product also supports store-and-forward forwarding scheme to ensure low latency and high data integrity, eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the switches could recognize up to 1K different MAC address and enables filtering and forwarding at full wire speed. 2.1.2 Switch Front Panel Figure 2-1 & 2-2 show the front panel and rear panel of SW-502 Figure 2-1 SW-502 front panel 5 4 3 2 1 Fig
ملخص المحتوى في الصفحة رقم 9
Figure 2-3 SW-802 front panel 8 7 6 5 4 3 2 1 Figure 2-4 SW-802 rear panel 2.1.3 LED Indicators LED Color Function PWR Green Lights to indicate that the Switch is powered on. Lit: indicate the link through that port is successfully LNK/ACT Green established. Blink: indicate that the switch is actively sending or receiving data over that port. Power Notice: 1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all t
ملخص المحتوى في الصفحة رقم 10
consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime. 2. In some area, installing a surge suppression device may also help to protect your switch from being damaged by unregulated surge or current to the Switch or the power adapter. 2.2 Installing the Switch This part describes how to install your Fast Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the or
ملخص المحتوى في الصفحة رقم 11
Note: Connection to the switch requires UTP Category 5 network cabling with RJ-45 tips. For more information, please see the Cabling Specification in Appendix A. Step5: Supply power to the switch. A. Connect one end of the power cable to the switch. B. Connect the power plug of the power cable to a standard wall outlet. When the switch receives power, the Power LED should remain solid Green.
ملخص المحتوى في الصفحة رقم 12
3. SWITCH OPERATION 3.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning process of Ethernet Switch. 3.2 Learning When one packet comes in from any port, the Switch will record the source address, port no. And the other related information in address table. This information w
ملخص المحتوى في الصفحة رقم 13
3.4 Store-and-Forward Store-and-Forward is one type of packet-forwarding techniques. A Store-and-Forward Ethernet Switching stores the incoming frame in an internal buffer, do the complete error checking before transmission. Therefore, no error packets occurrence, it is the best choice when a network needs efficiency and stability. The Ethernet Switch scans the destination address from the packet-header, searches the routing table provided for the incoming port and forwards the packet,
ملخص المحتوى في الصفحة رقم 14
connection is established with another network device (usually at Power On or Reset). This is done by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.
ملخص المحتوى في الصفحة رقم 15
4. TROUBLESHOOTING This chapter contains information to help you solve problems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. Some stations cannot talk to other stations located on the other port Solution: The address table may contain older information than of the address table of that node. Please power down to refresh the address information. Performance is bad Solution: Check the full duplex status
ملخص المحتوى في الصفحة رقم 16
This page intentionally left blank!
ملخص المحتوى في الصفحة رقم 17
Appendix A A.1 Switch's RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. A.2 10/100Mbps, 10/100Base-TX When connecting your 10/100Mbps Ethernet Switch to another switch, a b
ملخص المحتوى في الصفحة رقم 18
RJ-45 Connector pin assignment Contact MDI MDI-X Media Dependant Media Dependant Interface Interface - Cross 1 Tx + (transmit) RX + (receive) 2 Tx - (transmit) RX - (receive) 3 Rx + (receive) TX + (transmit) 4, 5 Not used 6 RX – (receive) TX – (transmit) 7, 8 Not used The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/.connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and col
ملخص المحتوى في الصفحة رقم 19
2011-A33160-000
