ملخص المحتوى في الصفحة رقم 1
BT CONVERSE 2100
User Guide
ملخص المحتوى في الصفحة رقم 2
Welcome to your BT Converse 2100 Corded Telephone • Three one-touch buttons for easy dialling of your most important numbers. • Headset facility lets you make and receive calls privately while keeping your hands free. • Secrecy feature lets you talk to someone else close by without your caller hearing. • Last number redial. • Providing you are connected to a compatible switchboard, the message waiting indicator will flash when you receive new messages.* • Amplifier lets you switch the earp
ملخص المحتوى في الصفحة رقم 3
This User Guide provides you with all the Got everything? information you need to get the most from • BT Converse 1200 telephone your BT Converse 2100. • Handset and cord (already fitted to base) You must first set up your BT Converse 2100 • Telephone line cord before you can use it. This doesn’t take long as (already fitted to base) it is easy to do. • Desk mounting plinth • Wall mounting plugs and screws Just follow the simple instructions on the next few pages. Hearing aid friendly The
ملخص المحتوى في الصفحة رقم 4
4 4 In this guide Getting started Help .......................................................................... 11 Location ..........................................................................5 General information Setting up .......................................................................5 Safety information .........................................................12 Getting to know your phone Guarantee .....................................................................12 But
ملخص المحتوى في الصفحة رقم 5
Getting started 5 5 Location WARNING Do not place your BT Converse 2100 in the You need to place your BT Converse 2100 within 3 metres of a telephone socket bathroom or other humid areas. so that the cable will reach. Your BT Converse 2100 can be wall mounted, Other electrical equipment close to your Converse could have an adverse effect on call see ‘Wall mounting your phone’ on page 14. quality. If you experience buzzing during a call try moving the Converse away from any electrical equ
ملخص المحتوى في الصفحة رقم 6
6 6 Getting to know your phone Buttons and features Handset park Message waiting indicator If the phone is wall-mounted, Flashes if you have you can hang the handset Voicemail, page 8.* here if you need to leave the phone during a call. Call indicator Flashes when you have an M1–M3 one-touch incoming call. memory buttons Press a one-touch button Dialling mode switch to dial the stored number, (underneath the phone) page 10. Lets you set the dialling mode, pages 5 and 13. One touch memory l
ملخص المحتوى في الصفحة رقم 7
Using the phone 7 7 Making and ending calls 1. Lift the handset and dial the number you want. 2. Replace the handset to end the call. Make a call using a headset Headsets are not supplied with your BT Converse 2100. However, you can purchase headsets (with RJ11 jack) by visiting www.shop.bt.com 1. Plug the headset (not supplied) into the socket marked on the underside of the base. 2. Press and dial the number. When the headset is in use the headset indicator (on the button) will be lit.
ملخص المحتوى في الصفحة رقم 8
8 Using the phone Secrecy During a call, you can talk to someone nearby without your caller hearing you. 1. Press . The red secrecy light (on the button) comes on and your caller cannot hear you. 2. Press again to return to your caller. Message waiting If your BT Converse phone is connected to a switchboard, the message waiting indicator will flash when you receive new voicemail messages. BT 1571 or similar network voicemail users can also use this feature, however the indicator light wi
ملخص المحتوى في الصفحة رقم 9
Using the phone 9 Adjusting the ringer volume 1. Set the Ringer Volume switch on the underside of the phone to 0 (Off), 1 or 2. Adjusting the ringer tone 1. Set the Ringer switch on the underside of the phone to 1 (Low), 2 (Medium) or 3 (High). R (Recall) The button is used to access a range of switchboard services, for example, to transfer calls and with some BT Calling Features. Amplify After you hang up, the volume will automatically 1. Press to switch the earpiece/headset volume betwee
ملخص المحتوى في الصفحة رقم 10
10 10 M1 – M3 memory buttons Each number can be up to 32 digits long and can include a pause or #. You can store your 3 most frequently used phone numbers on the one-touch memory If you enter more than 32 digits you will hear an buttons ( , and ) and dial them by pressing a single button. error beep. Store/replace a one touch number 1. Lift the handset, or press , to get a line. 2. Press and hold the , or button you want until you hear a beep and the Secrecy light flashes. 3. Enter the nu
ملخص المحتوى في الصفحة رقم 11
Help 11 11 Phone does not work/No dial tone Check that the line cord is plugged in, see page 5. You have a dial tone, but the phone will not dial out If you are connected to a switchboard, check whether you need to dial an access code or if you need to change the dial mode, see pages 5 and 13. Phone ringer does not ring Is the ringer volume switch set to O? Move the ringer volume switch to 1 or 2, see page 9. If you experience any problems, please visit www.bt.com/producthelp
ملخص المحتوى في الصفحة رقم 12
12 12 General information The conditions of this guarantee are: Safety information • The guarantee shall only apply to defects that occur within the • Clean the phone with a damp (not wet) cloth, or an anti-static wipe. 12 month guarantee period. Never use household polish as this will damage the product. Never • Proof of purchase is required. use a dry cloth as this may cause a static shock. • The equipment is returned to BT or its agent as instructed. • Do not open the handset or base. Th
ملخص المحتوى في الصفحة رقم 13
General information 13 Technical information Declaration of Conformance How many telephones can you have? Hereby, A-Team declares that this BT Converse 2100 is in compliance • All items of telephone equipment have a Ringer Equivalence with the essential requirements and other relevant provisions of Number (REN), which is used to calculate the number of items which Directive 1999/5/EC. may be connected to any one telephone line. Your BT Converse 2100 If you would like a copy of the Declaratio
ملخص المحتوى في الصفحة رقم 14
14 14 Wall mounting your phone WARNING 1. Unclip the stand from the base of the Before you wall-mount your BT Converse 2100, WALL PLUG SCREW check that you are not drilling into any hidden phone and remove it. Re-route the wiring or pipes. telephone line cord towards the Make sure the telephone line cord will reach the bottom of the phone. wall socket. 70 mm WALL 2. Drill two holes in the wall 70mm vertically apart using an 8mm drill bit. 3. Insert the wall plugs if necessary, then insert
ملخص المحتوى في الصفحة رقم 15
Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2009. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. Printed in China. Designed and produced by The Art
