ملخص المحتوى في الصفحة رقم 1
Owner’s Manual
KF-E2.0
Customer Service
(800) 340-0482
Manufactured By:
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
CAUTION
Read all precautions and instructions
in this manual before using this equip-
ment.
Model Name : KF-E2.0
Serial Number :
Serial Number can be found at
the above specified location.
315-00131
09/18 Rev 9.0
ملخص المحتوى في الصفحة رقم 2
www.keysfitness.com TABLE OF CONTENTS THANK YOU for making this unit a part of your exercise program. Keys Fitness Table of Contents 2 Important Safety Information 3 Products Fitness assures the very best in value, appearance, durability and biome- Assembly 4 chanics. This manual will guide you through the assembly process. If at any time Parts Identifier 5 you are having trouble with the assembly or use of this product, then please con- Assembly Steps 6 tact us at our Keys Fi
ملخص المحتوى في الصفحة رقم 3
www.keysfitness.com WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product. To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user, it is important to review this manual
ملخص المحتوى في الصفحة رقم 4
Assembly www.keysfitness.com 4
ملخص المحتوى في الصفحة رقم 5
www.keysfitness.com G1 E2 D B A Upright post Left Rotating Right Handlebar Front stabilizer Main Frame Handlebars Right Rotating Left Handlebar G2 C E1 Handlebar Wheel Tracks K2 Bottle Holder K1Water Bottle Pedal Arm Pedal Arm L-L Cover - Left L-R Cover - Right Upright tube cover F Rotating Arm - Pedal assembly (Right) H Allen Screws Allen Screws Allen Screws Allen Screws N3 N4 P2 Rotating Handlebar N1 N2 M8x20 M10x112 M8x70 Tube - Left M8x58 Allen Screws Allen Screws Allen Screws Screw
ملخص المحتوى في الصفحة رقم 6
www.keysfitness.com Use Tool 6mm 1 ASSEMBLY FOR FRONT STABILIZER A Secure the front stabilizer (B) to the main frame (A) using 2 allen screws (N4), 2 spring washers (N17) and 2 flat washers (N15). N17 B N4 N15 6 Assembly
ملخص المحتوى في الصفحة رقم 7
www.keysfitness.com ASSEMBLY FOR REAR WHEEL TRACKS Secure the rear wheel tracks (C) to the main frame (A) using screws (N1), springs washers (N13), and flat washers (N14). A Use Tool N13 N1 6mm Note: After finishing the installation of both the front stabilizer bar and the rear wheel tracks, in order to add stability to the unit, you may need to adjust the levelers that are located on the bottom of the stabilizer bars. C N14 C1 Assembly 7
ملخص المحتوى في الصفحة رقم 8
www.keysfitness.com Use Tool D 6mm H 3 ASSEMBLY FOR UPRIGHT POST Step 1: Insert the upright post cover (H) onto the upright post (D) from the bottom side. N14 D2 Step 2: Connect the lower sensor wire (A2) with the upper sensor wire (D2). Step 3: N7 Mount the upright post (D) to the main frame (A) and secure A2 using 4 allen screws (N7), 4 spring washers (N13), and 4 flat washers (N14). N13 Step 4: Slide the console tube cover down to conceal tube A connection. 8 Assembly
ملخص المحتوى في الصفحة رقم 9
www.keysfitness.com Use Tool Use Tool ASSEMBLY FOR STATIONARY HANDLEBARS 5mm Step 1: 6mm Connect the pulse wire (G1-1) from the right handlebar (G1) to the pulse wire (D2-1) from the upright post (D). 4 N3 Step 2: Attach the right stationary handlebar (G1) to the right handlebar mount on the E1 upright post (D) and secure using 3 allen N13 screws (N6). G2 ASSEMBLY FOR RIGHT Step 3: HANDLEBAR Repeat steps 1 and 2 for the left station- ary handlebar (G2). Step 1: N14 Connect the right ro
ملخص المحتوى في الصفحة رقم 10
www.keysfitness.com Use Tool Use Tool N22 13mm N13 14mm P1 6mm 5 N2 N14 ASSEMBLY FOR RIGHT ROTATING HANDLEBAR TUBE Step 1: Insert 2 bushings (N18) on the tapered ends into the right pedal arm joint (A) - one for each side. Step 2: Attach the right pedal arm (A) to the right rotating handlebar tube (P1) and secure using allen screw (N2), spring washer (N13), flat washer (N14) and nut (N22). P1 N18 10 Assembly A
ملخص المحتوى في الصفحة رقم 11
www.keysfitness.com Use Tool D 6mm 6 N8 P2 N13 N21 ASSEMBLY FOR LEFT ROTATING HANDLEBAR N8 Connect the left rotating arm (P2) to the upright post (D) F at the arm joint and secure using allen screw (N8), spring washer (N13) and flat washer (N21). N20 ASSEMBLY FOR LEFT PEDAL N13 l ocate the left pedal assembly (F) and attach it to the main frame (A) at the pedal tube mount. Secure with allen screw (N8), spring washer (N13) and flat washer (N20). Assembly 11
ملخص المحتوى في الصفحة رقم 12
www.keysfitness.com Use Tool Use Tool 13mm 14mm 7 6mm ASSEMBLY FOR LEFT ROTATING HANDLEBAR TUBE Step 1: Insert 2 bushings (N18) on the tapered ends into the left pedal arm joint (F) - one for each side. Step 2: Attach the left pedal arm (F) to the right rotating handlebar tube (P2) and secure using allen screw P2 N13 N14 (N2), spring washer (N13), flat washer (N14) and nut (N22). N22 P2 N2 N18 F N18 F 12 Assembly
ملخص المحتوى في الصفحة رقم 13
www.keysfitness.com N8 P2 N13 N21 D FILLING WASHER 8 P1 N21 N13 N8 FILLING WASHER ASSEMBLY FOR FILLING WASHER Step 1: If the arms appear to have too much side to side movement, check and see if there is any gap in between the handlebar tube and the upright post arm joint by inserting one or more filling washers in the handlebar tube connection. Step 2: If there is a gap for the filling washer to fit, the handlebar(s) should be uninstalled to fit the filling washer in the handlebar joint.
ملخص المحتوى في الصفحة رقم 14
www.keysfitness.com J Use Tool Use Tool 13mm D 14mm 6mm J1 9 ASSEMBLY FOR LEFT ROTATING HANDLEBAR J D Attach the left rotating handlebar (E2) to the left rotating handlebar tube (P2) and se- cure using 4 allen screws (N3), 4 spring washers (N13) and 4 flat washers (N14). E2 ASSEMBLY FOR PEDAL JOINT COVER N3 Step 1: N13 Install left pedal joint cover (l-l) to conceal pedal arm connection and secure using N14 screw (N8). K1 Step 2: P2 L-(L) Repeat step 1 on the right side with right pedal joi
ملخص المحتوى في الصفحة رقم 15
www.keysfitness.com Congratulations! You have completed the assembly of your new Keys Fitness E2.0 Elliptical! Assembly 15
ملخص المحتوى في الصفحة رقم 16
www.keysfitness.com ADAPTOR PLUG-IN LOCATION Adapter (M) 16 Assembly
ملخص المحتوى في الصفحة رقم 17
www.keysfitness.com MOVING YOUR UNIT TRANSPORT WHEELS 17 Assembly
ملخص المحتوى في الصفحة رقم 18
Console Information www.keysfitness.com 18
ملخص المحتوى في الصفحة رقم 19
www.keysfitness.com DISPLAY: 1) Program Selection Manual, Program (presets), and Watt 2) Segment Program Profile Rows signify tension level, whereas columns signify interval of time 1 3) Time 13 4) Speed 2 5) One touch program profile buttons 12 6) Start / Stop Key 4 3 11 7) Recovery Key Evaluates overall fitness level 8) Up (+) and Down (-) Keys 9) Reset Key Resets function values to default CAUTION: • Before starting any exercise 5 program, consult your physician. • For
ملخص المحتوى في الصفحة رقم 20
www.keysfitness.com CONSOLE FUNCTION PARAMETERS TIME 0:00~99:59. WATTS 0~999 WATTS CALORIES 0~9999 TEMPERATURE 0~60ºC / 32~99ºF GENDER FEMALE / MALE AGE 10-99 HEIGHT 100-200 (CM) / 40-80 (INCH) PULSE P~30~240 HEART SYMBOL ON / OFF blinks PROGRAM P1~P12 WATT CONSTANT 10~350 WATTS PERSONAL U1~U4 WEIGHT 20-150 (KG) / 40-350 (LB) CONSOLE BUTTONS: START/STOP: This button is used to start or stop training RECOVERY: This button is used to begin the Recovery feature of the console (refer to Console Func
