ملخص المحتوى في الصفحة رقم 8
FEATURES TOP-MOUNTED MOTOR GRASS DEFLECTOR The top-mounted motor improves balance and is lo- The trimmer includes a grass deflector that helps protect cated away from the dust and debris of the cutting area. you from flying debris. CORD RETAINER ERGONOMIC DESIGN The cord retainer helps prevent accidental unplugging of The design of the trimmer provides for easy handling. It is the extension cord. designed for comfort and ease of grasp when operating in different positions and at different an
ملخص المحتوى في الصفحة رقم 9
ASSEMBLY CONNECTING THE ATTACHMENT TO THE UPPER SHAFT UPPER SHAFT COUPLER See Figure 2. The coupler connects the attachment to the upper shaft. GUIDE RECESS Follow these steps to connect the attachment to the up- per shaft. BUTTON n Loosen the knob by turning it counterclockwise. n Remove the end cap from the attachment shaft. n Align the button with the guide recess on the upper shaft. n Slide the attachment shaft into the upper shaft until POSITIONING the attachment shaft clicks
ملخص المحتوى في الصفحة رقم 10
ASSEMBLY ATTACHING THE GRASS DEFLECTOR WING NUT See Figure 4. GRASS LOCK WASHER DEFLECTOR WARNING: WASHER The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury. Follow these steps to attach the grass deflector. n Slide the grass deflector onto the attachment shaft and fit it over the bracket. n Install the bolt through the holes in the tabs on the grass deflector and the slots in the bracket
ملخص المحتوى في الصفحة رقم 11
OPERATION WARNING: The product may throw objects during operation, caus- ing injury to the operator or to bystanders. Always wear suitable eye protection, boots, gloves, and long, heavy pants while operating the product. STARTING AND STOPPING THE TRIMMER See Figure 7. n To start the trimmer: Press the trigger. n To stop the trimmer: Release the trigger. OPERATING THE TRIMMER See Figure 8. Follow these steps to operate the trimmer. TRIGGER n Plug the trimmer cord into an extension cord ap
ملخص المحتوى في الصفحة رقم 12
OPERATION n The tip of the cutting line will wear during use; this reduces the cutting swath. If the line is not advanced occasionally, it will wear down to the eyelet. When the trimmer stops, the line tends to relax and may retract into the trimmer head assembly. Should this occur, unplug the trimmer, remove the spool, refeed the line through the eyelets, and reassemble the spool. n Avoid hitting objects with the line, such as chain-link fences or concrete, as this causes rapid wear. n N
ملخص المحتوى في الصفحة رقم 13
OPERATION CUT OFF BLADE This trimmer is equipped with a cut-off blade on the grass deflector. For best cutting, advance string until it is trimmed to length by the cut-off blade. Advance string whenever you hear the engine running faster than normal. This will DIRECTION OF maintain best performance and keep string long enough ROTATION to advance properly. CUTTING TIPS See Figure 11. n Keep the trimmer tilted toward the area being cut; this is the best cutting area. n Do not cut in dangerou
ملخص المحتوى في الصفحة رقم 14
MAINTENANCE WARNING: Use only identical Ryobi replacement parts when ser- vicing this product. Use of any other parts may create a hazard or cause product damage. CLEANING THE TRIMMER Release the trigger, allow the trimmer to coast to a stop, and unplug the trimmer before cleaning. n Clean the exterior of the trimmer with a soft, dry cloth. n Avoid using solvents when cleaning plastic parts. Most Fig. 13 plastics are susceptible to damage from various types of commercial solvents and
ملخص المحتوى في الصفحة رقم 15
MAINTENANCE n Wind the line counterclockwise around the spool fol- DRIVE SHAFT lowing arrows on spool. Do not overfill. NOTE: After winding the line, there should be about 6 TRIMMER HEAD in. (152 mm) between the wound line and the outside edge of the spool. n Secure the line temporarily by pushing it into one of the slotted tabs on the spool. n Repeat the process for the lower threaded area of the spool, winding the line counterclockwise and securing it in the slotted tab opposite the
ملخص المحتوى في الصفحة رقم 16
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Line will not advance when tap 1. Line is welded to itself. 1. Lubricate with a silicone spray. retaining cap 2. Install more line (Refer to “Replacing the Cut- 2. Not enough line on spool. ting Line” earlier in this manual). 3. Line is worn too short. 3. Pull lines while alternately pressing down on 4. Line is tangled on spool. and releasing spool retainer. 4. Remove line from spool and rewi
ملخص المحتوى في الصفحة رقم 17
ACCESSORIES REPLACEMENT PARTS String Head (RH Thread) .080 in. (2 mm) ......................................................................................................... DA03001A Spool & Line .080 in. (2 mm) ..............................................................................................................................UP00145 String Refill .080 in. (2 mm); 390 ft. (118 mm) ...................................................................................................... D
ملخص المحتوى في الصفحة رقم 18
WARRANTY LIMITED WARRANTY STATEMENT Ryobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies, Inc. product is free from defect in material and workmanship and agrees to repair or replace, at Ryobi Technologies, Inc.’s discretion, any defective product free of charge within these time periods from the date of purchase. One year if the product is used for personal, family or household use; 90 days, if any of the above products are used for any other purpose
ملخص المحتوى في الصفحة رقم 19
NOTES Page 19
ملخص المحتوى في الصفحة رقم 20
OPERATOR'S MANUAL 15 in. (381 mm) String Trimmer ZRRY41002 Series • SERVICE Now that you have purchased your product, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-860-4050 for your nearest Authorized Service Center. • MODEL NO. AND SERIAL NO. The model number of this tool is found on a plate attached to the motor housing. Please rec
ملخص المحتوى في الصفحة رقم 1
OPERATOR'S MANUAL
15 in. (381 mm)
String Trimmer
ZRRY41002 Series
EL15
(ZRRY41002)
Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual.
Thank you for buying a Ryobi trimmer.
SAVE THIS MANUAL FOR FUTURE REFERENCE
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS n Introduction ..............................................................................................................................................................2 n General Safety Rules ................................................................................................................................................3 n Specific Safety Rules ..................................................................................................................
ملخص المحتوى في الصفحة رقم 3
GENERAL SAFETY RULES n Use the right product. Use the product for the intended purpose only. WARNING: n Do not handle the product with wet hands. When using electric gardening appliances, basic safety n Do not use the product if the switch does not turn the precautions should always be followed to reduce the product on or off. A product that cannot be controlled risk of fire, electric shock, and personal injury, including with the switch is dangerous and must be repaired. the following: n
ملخص المحتوى في الصفحة رقم 4
SPECIFIC SAFETY RULES n Inspect extension cords for deterioration, cuts, or ELECTRICAL SAFETY RULES cracks in the insulation. Repair or replace the cords if n Make sure the cord is located so that it will not be any defects appear. stepped on, tripped over, or otherwise subjected to n A nameplate on the product indicates the unit’s volt- damage or stress. age. Never connect the product to an AC voltage that n Do not abuse the power cord. Never carry the product differs from this voltage.
ملخص المحتوى في الصفحة رقم 5
SYMBOLS Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper inter- pretation of these symbols will allow you to operate the tool more safely and effectively. SYMBOL NAME EXPLANATION Safety Alert Precautions that involve your safety. .
ملخص المحتوى في الصفحة رقم 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in serious injury. CAUTION: Indicates a potentially hazardous situation, whic
ملخص المحتوى في الصفحة رقم 7
SPECIFICATIONS MOTOR Motor Type ......................................................................................................................................................... 120 V AC Operating RPM.......................................................................................................................................................... 7500 Amperes ............................................................................................................................
