Cornelius Connector J7 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

FCB Ice Probe Supplemental Harness Installation Instructions
INSTALLATION INSTRUCTIONS
ICE PROBE SUPPLEMENTAL HARNESS
The following instructions should be used for installation of the Ice Probe Supplemental Harness on Pin-
nacle FCB units. Each kit will upgrade the harness for 1 main board (2 barrels).
Parts List
Item
Description Qty
Number
1 Harness for Connector J7 1
2 Harness for Connector J18 1
Tools Required
Flat Screwdriver
¼” Nut Driver
CAUTION – Only trained and certified electrical te

ملخص المحتوى في الصفحة رقم 2

FCB Ice Probe Supplemental Harness Installation Instructions 5. Disconnect the connector J18 from the Main Control Main Board Board. Connection 6. Using the provided White/Blue Harness, connect J18 the Male end to the Main Control board at J18 and the Female end to the Male end of the main unit harness J18. Main Unit Harness J18 7. Replace the screws that hold the control box door closed. 8. Switch the power to the unit on. After the unit runs through the initialization, turn both barrel