Gateway GTW-WMM103 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Assembly Instructions for GTW-WMM103 Flat Panel TV Wall Mount
Thank you for choosing the Gateway GTW-MM103 manufactured by Sanus Systems. This product is designed to mount fl at panel tele-
visions weighing up to 175 lb. to a vertical wall. It allows you to tilt your new television up to 15º without the use of tools.

Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualifi ed
contractor or contact Sanus at 8

ملخص المحتوى في الصفحة رقم 2

2] Mount the TV Rails to the back of your fl at panel TV: Remove the two stand legs from the back of the television by taking out the four phillips screws. Once these four screws are removed, the television will slide up and forward away from each leg. Now take out the four exposed M8 bolts and remove the silver spacer. You will use this M8 bolt and lock washer to attach the Left and Right Rails to the back of the TV as shown in diagram 2-B. Make sure these bolts are tight! Also, make sure th