Atdec Universal Tilt Wall Mount TH3050RW دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

C
Attaching the Display to the Wall Plate
Installation Instructions
C.1. Attaching the Display to the Wall Plate C.2. Pivot Head Load Capacity Adjustment
Note: This procedure will require two persons TELEHOOK
M12 Hex Nut
30”-50” UNIVERSAL ROTATING WALL MOUNT
Tighten
Important Notes


The Telehook 30-50 Universal Rotating Wall Mount supports flat panel displays from 30” (76cm) to 50” (127cm)
and supports a maximum load of 85kgs (187lbs).


This product is factory set to support 35kgs (77lbs)

ملخص المحتوى في الصفحة رقم 2

B Choosing and Assembling the Correct Mounting Configuration 1 3 Configuration 3: 260mm to 660mm (10 / ”-26”) x 200mm to 400mm (8”-15 / ”) 4 4 Measure the mounting hole pattern on the back of the display. Select the appropriate configuration (either 1, 2 Mounting Hole Patterns or 3) that best suits the mounting hole pattern of the display then attach the product to the display as shown. Attaching the Bracket to the Display 260mm 1 (10 / ”) Configuration 1: VESA Compliant 100mmx100mm (4”x4”) &