ملخص المحتوى في الصفحة رقم 1
Gener Gener General Mobile Radio Ser al Mobile Radio Ser al Mobile Radio Service (GMRS) vice (GMRS) vice (GMRS)
Gener General Mobile Radio Ser al Mobile Radio Service (GMRS) vice (GMRS)
Model: GMRS2VMK Model: GMRS2VMK Model: GMRS2VMK Model: GMRS2VMK Model: GMRS2VMK
Owner Owner Owner’s Man ’s Man ’s Manual ual ual
Owner Owner’s Man ’s Manual ual
EMG
EMG
HI LO HI LO
CTC ID
CTC ID FAST INTELLIGENT CHARGER
OUT OF
RANGE OUT OF
RANGE
MODE
SCAN
EMG
Customer Service
1-800-290-6650
ملخص المحتوى في الصفحة رقم 2
CAUTIONS Never attempt to charge alkaline or dry cell batteries, as batteries may burst causing personal injury and damage to the product. When recharging nickel metal hydride (NiMH) batteries with the Audiovox charger, use only Audiovox approved re- chargeable batteries. The Audiovox rechargeable batteries were designed to provide optimum operation for your radio in various environmental conditions. Use of the Audiovox charger with other brands of batteries is not recommended, as battery c
ملخص المحتوى في الصفحة رقم 3
FEATURES Your GMRS2VMK Radio is a portable, easy to use, two-way radio that you can carry almost anywhere. The Fast Intelligent Charger can be mounted in a vehicle and is designed for a vehicle environment. The GMRS2VMK is skillfully constructed to give you reliable communications for many different applications. The GMRS2VMK is ideal for use around the house, in your boat, on hunting and camping trips, on the ski slopes or at the mall. The GMRS2VMK is comprised of the items below: PERFO
ملخص المحتوى في الصفحة رقم 4
GMRS2VMK (FCC License Required) 5 6 4 16 8 3 3 13 (REF) EMG 12 EMG CTC ID HI LO HI LO CTC ID OUT OF 14 RANGE OUT OF RANGE MODE 2 SCAN EMG 15 1 10 (REF) 9 11 1 7 1. Battery Door 10. Up Channel/Volume Button 2. Monitor/Backlight Button 11. Down Channel/Volume Button 3. Detachable Carry Clip 12. MODE Button Part Number 2VMKBLT 13. SCAN/Lock Button 4. Push-To-Talk (PTT) Button 14. Emergency (EMG) Call 5. Antenna Button 6. External Speaker(SPK)/Micro- 15. Power On/Off Control phone (MIC) Jacks 1
ملخص المحتوى في الصفحة رقم 5
GMRS2VMK DISPLAY 8 1 9 2 EMG 10 HI LO 3 11 CTC ID 4 12 13 5 14 OUT OF 6 RANGE 15 7 16 1. Beep Tone Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Monitor Indicator: Icon appears when the Monitor (M) button is pressed and the channel monitor function is activated. 3. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down and MODE. 4. Signal Strength Indicator: Icon appears
ملخص المحتوى في الصفحة رقم 6
12.Caller Identification (ID) Indicator: This indication appears when you select a caller identification code (between 1 and 10). ID selection operates in conjunction with the small segment display, and can also be used to identify a calling party in the monitor mode. 13.Small Segment Display: Displays the CTCSS tone option in the channel from (00-38). 14.Out of Range Indicator: Icon will be on steady when received signal strength is normal; icon flashes when signal strength becomes weak and in
ملخص المحتوى في الصفحة رقم 7
3. Various Brands of Rechargeable Batteries - Use of the supplied Audiovox charger with other brands of rechargeable batteries is not recommended, as battery charging times will vary with different brands of batteries.Refer to the manufacturer’s instructions for charging other brands of batteries. Installing the batteries: Battery installation is made more convenient when the carry clip is removed. To do this, release the spring latch securing the clip to radio and slide the clip downward and
ملخص المحتوى في الصفحة رقم 8
Mounting the Charger The Fast Intelligent Charger can be mounted horizontally or vertically in a vehicle. Mount the Fast Intelligent Charger using the following proce- dure: 1. Hold the charger up to the surface where is to be mounted. 2. Using a marker, mark the location of where the mounting holes are going to made. WARNING! Never install above your fuel tank as the holes you must drill may pierce the tank or the fuel lines. Also check for other obstructions such as wires, etc. 3. Drill the m
ملخص المحتوى في الصفحة رقم 9
Where to Install the Charger The Fast Intelligent Charger can be mounted horizontally or vertically in any suitable location within the trunk, passenger compartment or rear cargo area of your vehicle. When mounting the charger in the trunk it maybe necessary route the cigarette lighter adapter wiring from the trunk to your car dashboard if no closer power outlet is available. The cigarette lighter adapter cable is approximately 16 feet long. WARNING! Never install above your fuel tank as the h
ملخص المحتوى في الصفحة رقم 10
Using the Fast Intelligent Charger The Fast Intelligent Charger will typically fully charge the transceivers in two hours. LEDs mounted on the front of the charger provide visual status of the charging process. Charging Indicators Status Steady Yellow: The charging process is not taking place. Charging will not occur at temperatures below 14 degrees Fahrenheit (-10 degrees Celsius) or above 140 degrees Fahrenheit (60 degrees Celsius). Blinking Red: The charging process is not taking place. The b
ملخص المحتوى في الصفحة رقم 11
Powering the Charger with the Cigarette Lighter Adapter The GMRS2VMK Fast Intelligent Charger obtains its operating power us- ing the Cigarette Lighter Adapter. Use the following procedure to connect the charger to input power: 1. Insert the GMRS2VMK Cigarette Lighter Adapter connector into the charger base by aligning it with the pins on the connector on the back of the charger base. 2. Press down on the connector locking tab and press the connec- tor into place. The connector will lock in
ملخص المحتوى في الصفحة رقم 12
Mounting the Transceiver in the Charger The transceiver is designed to lock into the Fast Intelligent Charger. Use the following procedure: 1. While holding the transceiver in the palm of your hand, reach the carry clip handle and press down to open the carry clip. 2. While the carry clip is in the open position, move the transceiver downward into the charger base. 3. Press the transceiver firmly into the base. 4. Release the carry clip handle and ensure that the transceiver is secure by lightl
ملخص المحتوى في الصفحة رقم 13
GMRS2VMK OPERATIONAL MODES MODE CHANNEL SELECT CTCSS SELECT POWER (GMRS Channels Only) SELECT VOX SELECT DUAL WATCH ROGER BEEP BUTTON BEEP I D SELECT CALL Controls: SELECT Power On/Off (15) Button Press and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds. Adjusting the Volume With the unit powered on, press the Up Channel/Volume button ( ) to increase
ملخص المحتوى في الصفحة رقم 14
Monitor/Display Backlight Button (2) This button is used to check activity on the current frequency before transmitting. Check activity by pressing the Monitor (M) Button longer than 2 seconds; the icon will apppear on the display and you will hear static if frequency is clear. Do not transmit if you hear conversation. Hold down the Monitor Button again longer than 2 seconds and the icon will disapppear from the display. The monitor function will temporarily bypass the squelch setting an
ملخص المحتوى في الصفحة رقم 15
Up Channel/Volume Button (10) In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings. Down Channel/Volume Button (11) In the standby mode, pressing this button will decrement the listening volume. When in function edit mode this button will be used to adjust the unit’s settings. Mode Button (12) This button is used to select the various GMRS feature settings such as channel/CTCSS code select
ملخص المحتوى في الصفحة رقم 16
Operating Modes and Features GMRS Operation: - From GMRS standby mode, press and hold the ( ) button for 2 seconds to turn on power. - Press the MODE button so the Channel number flashes. - Select the desired channel with the Up (10) and Down (11) Buttons. When receiving a call, the signal strength meter appears to indicate incoming received signal strength and the Monitor section of the Transmit/Monitor LED (16) lights green. - Press and hold the PTT button (4) to transmit, then speak into t
ملخص المحتوى في الصفحة رقم 17
To change the channel: - From GMRS/FRS standby mode, press the MODE button (12) once, or until the channel number flashes. - Press the Up Button (10) briefly to move to the next higher main chan- nel number. - Press the Down Button (11) briefly to move to the next lower main channel number. - Press the PTT button momentarily to confirm selection. CTCSS Mode (Sub-Channel) Selection The Coded Tone Controlled Squelch System (CTCSS) provides 38 Sub-Fre- quencies. This feature allows you to utilize
ملخص المحتوى في الصفحة رقم 18
Transmit Power Selection Mode This feature permits selection of the transmitting power level to high or low. (FRS channels 1-7 operate on low power.) Using low power, the unit will have a lower transmit range, but battery life will be in- creased. NOTE: You will find that for the majority of your needs, the low-power setting will provide adequate communications on all channels; there should seldom be any need to use high power, except in situations where you need absolute maximum range. Using lo
ملخص المحتوى في الصفحة رقم 19
Dual Watch Mode This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then the unit will resume scanning the two channels. Pressing the PTT button during a received transmission will set the unit to transmit on the same channel. Pressing the PTT button when no signal is received will set the unit to transmit on the primary channel. To
ملخص المحتوى في الصفحة رقم 20
Key Tone This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE Button, SCAN Button, or the EMG Button. To turn the key tones on or off: - From GMRS/FRS standby mode, press the MODE Button 7 times until bP, the Bell ( ) icon, and On or oF flash on the LCD display. - Press the Up or Down Button to toggle the key tone feature On or Off. - Press the PTT button momentarily to confirm selection. When the ke
