ملخص المحتوى في الصفحة رقم 1
15-1993.fm Page 1 Wednesday, October 20, 1999 12:03 PM
Cat. No. 15-1993
OWNER’S MANUAL
4-in-One Smart Light-Up
Remote Control
Please read before using this equipment.
ملخص المحتوى في الصفحة رقم 2
15-1993.fm Page 2 Wednesday, October 20, 1999 12:03 PM FEATURES Your RadioShack 4-in-One Smart Light-Up Re- mote Control is a pre-programmed universal learning remote. It is both pre-programmed with the most commonly used commands, and equipped with "smart technology" that lets you customize your remote to meet your home en- tertainment needs. Its lighted keypad lets you easily see the re- mote's buttons in a dark room. When you turn on this feature, pressing any button lights the entire ke
ملخص المحتوى في الصفحة رقم 3
15-1993.fm Page 3 Wednesday, October 20, 1999 12:03 PM CONTENTS Introduction ................................................ 4 Preparation ................................................. 5 Installing Batteries .................................. 5 Device Types .......................................... 6 Setting Up Your Remote Control ............ 6 To Operate Your TV/VCR Combination .. 7 Operation .................................................... 8 Using the Smart Technology ...........
ملخص المحتوى في الصفحة رقم 4
15-1993.fm Page 4 Wednesday, October 20, 1999 12:03 PM INTRODUCTION Your RadioShack 4-in-One Smart Light-Up was designed to control the most commonly used functions on your TV, VCR, TV/VCR com- bination, cable converter, and CD player. It might not be able to duplicate some of your original remote control's seldom-used func- tions. When you set up the remote control, its com- mand keys work like the keys on your original remote controls. For example, the 4-in-One's POWER key works like a POWE
ملخص المحتوى في الصفحة رقم 5
15-1993.fm Page 5 Wednesday, October 20, 1999 12:03 PM PREPARATION INSTALLING BATTERIES Your remote control requires four AAA batter- ies (not supplied) for power. For the best per- formance and longest life, we recommend RadioShack alkaline batteries. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries or differ- ent types of batteries. • Do not press any of the remote control's keys while installing batteries. Note: You do not
ملخص المحتوى في الصفحة رقم 6
15-1993.fm Page 6 Wednesday, October 20, 1999 12:03 PM ies. This can press keys for an extended period of time and reduce the battery life. DEVICE TYPES You can use the remote control's device keys to control the following types of devices: TV — TVs VCR — VCRs and TV/VCR combinations CBL — Cable converters, satellite systems AUX — CD Players, Home Automation SETTING UP YOUR REMOTE CONTROL 1. Refer to “Manufacturer Codes” on Page 17 and write down the codes for your brand of device on the 4-
ملخص المحتوى في الصفحة رقم 7
15-1993.fm Page 7 Wednesday, October 20, 1999 12:03 PM 4. Point the remote control at your device and press POWER. Your device should turn off (or on, if it was off). If the remote does not operate your device, try the other codes listed in “Manufacturer Codes” on Page 17 for your brand of TV, VCR, cable converter, or CD player. 5. Repeat Steps 2–4 for additional devices. TO OPERATE YOUR TV/VCR COMBINATION 1. Locate the codes for your TV/VCR combi- nation in “TV/VCR Combinations” on Page 3
ملخص المحتوى في الصفحة رقم 8
15-1993.fm Page 8 Wednesday, October 20, 1999 12:03 PM OPERATION 1. Press the device key for the device you want to control. 2. Point the remote control toward the device you want to control, then press the desired command keys. 3. Repeat Steps 1 and 2 for all other devices you want to operate. Note: The command keys on the remote control work the same as the keys on the original remote control; however, the label- ing might differ slightly. 4. To turn off the last device you selected, pres
ملخص المحتوى في الصفحة رقم 9
15-1993.fm Page 9 Wednesday, October 20, 1999 12:03 PM 1. Place your original remote control nose-to- nose with the RadioShack Smart Light-Up Remote Control. 2. Hold down P until the red light blinks twice, then press 9 7 5. The red light blinks twice again. 3. Press the device key (TV, VCR, CBL, or AUX) for the mode where you want the function to reside. Note: You can program each smart key for a different function in each of the four modes. For example, 1s might serve as a MENU key in TV m
ملخص المحتوى في الصفحة رقم 10
15-1993.fm Page 10 Wednesday, October 20, 1999 12:03 PM DELETING LEARNED FUNCTIONS FROM SMART KEYS You can delete learned functions from the smart keys (1s, 2s, 3s, and 4s) to make room for other functions. 1. Hold down P until the red light blinks twice. 2. Press 9 7 6. The red light blinks twice. 3. Press the device key (TV, VCR, CBL, or AUX) where the learned function resides. 4. Press the smart key you programmed with the function twice to delete the learned function. The red light blin
ملخص المحتوى في الصفحة رقم 11
15-1993.fm Page 11 Wednesday, October 20, 1999 12:03 PM function, repeat Steps 1–2, then press AUX twice. PUNCH-THROUGH The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. A TV is often the only device that uses the vol- ume keys. Punch-through allows you to control the TV’s volume while the 4-in-One is in any de- vice mode. With punch-through on, if you press VCR and use your volume keys, the 4-in-One will control the T
ملخص المحتوى في الصفحة رقم 12
15-1993.fm Page 12 Wednesday, October 20, 1999 12:03 PM FAVORITE CHANNEL SCAN You can use your remote control to scan through up to 10 of your favorite channels on your TV, VCR, or cable box. Note: You can scan channels only for one de- vice (TV, VCR, cable converter) at a time. You cannot set up a favorite channel list for another device until you clear the existing list. 1. Press the device key for the device with the channels you want to program (TV, VCR, or CBL). The red light blinks.
ملخص المحتوى في الصفحة رقم 13
15-1993.fm Page 13 Wednesday, October 20, 1999 12:03 PM stopping on each channel for about 3 sec- onds. 6. Press any key other than SCAN when you see a channel you want to watch. Scan- ning stops. Clearing Favorite Channel Scan You must clear the channels in your favorite channel scan list if you want to change them. 1. Hold down P until the red light blinks twice. 2. Press 9 9 6, then hold down P until the red light blinks twice. USING THE LIGHT The back light lets you see the keys on your
ملخص المحتوى في الصفحة رقم 14
15-1993.fm Page 14 Wednesday, October 20, 1999 12:03 PM IF YOU HAVE PROBLEMS MANUAL CODE SEARCH If the 4-in-One Smart Light-Up Remote Control does not operate your remote-controlled devic- es when you first set it up, you might have to manually find the correct codes for your devic- es. You can try all the codes listed in “Manu- facturer Codes” on Page17 for your brand device, or you can follow these steps to search the remote control's entire library. 1. Manually turn on the device you want
ملخص المحتوى في الصفحة رقم 15
15-1993.fm Page 15 Wednesday, October 20, 1999 12:03 PM If necessary, repeat these steps for each de- vice. Note: Some VCRs and CD players do not have a POWER key on the original remote. If so, manually turn on the VCR, insert a tape or CD, and repeat the manual code search using PLAY instead of POWER. When the device responds, press P. The red light blinks twice. Determining the 4-Digit Code After you set up your remote control using the manual code search, you can find which 4-digit cod
ملخص المحتوى في الصفحة رقم 16
15-1993.fm Page 16 Wednesday, October 20, 1999 12:03 PM TROUBLESHOOTING If the remote control stops working after you have successfully tested the control for each device, or if you are unable to get the remote control to work at all: • Be sure you press the device key for the device you want to control before you press any other key. •Confirm that your remote-controlled devices are working properly by using the original remote control or the manual con- trols. • Replace the batteries. • If s
ملخص المحتوى في الصفحة رقم 17
15-1993.fm Page 17 Wednesday, October 20, 1999 12:03 PM MANUFACTURER CODES The following list tells you which 4-digit codes to enter to set up the remote control to operate your: • Cable Converter (see below) • CD Player (see Page 19) • Home Automation (see Page 22) • Laser Disc Player (see Page 22) • Satellite Receiver (see Page 23) • Television (see Page 23) • TV/VCR Combination (see Page 34) • VCR (see Page 29) • Video Accessory (see Page 22) Notes: • The remote control might not have ever
ملخص المحتوى في الصفحة رقم 18
15-1993.fm Page 18 Wednesday, October 20, 1999 12:03 PM Radio Shack Manufacturer Code(s) Cat. No. Citizen 0153, 0315 Colour Voice 0025 Comtronics 0040 Contec 0019 Eastern 0002 Emerson 0797 Everquest 0015, 0040 Focus 0400 GC Electronics 0207 Garrard 0153 Gemini 0015 General 0476, 0276, 0011, 0810 Instrument GoldStar 0144, 0040 Goodmind 0797 Hamlin 0020, 0259, 0009, 0034 Hitachi 0011 Hytex 0007 Jasco 0015, 0153, 0315 Jerrold 0003, 0012, 0476, 0276, 0014, 0015, 0011, 0810 Memorex 0000 Movie
ملخص المحتوى في الصفحة رقم 19
15-1993.fm Page 19 Wednesday, October 20, 1999 12:03 PM Radio Shack Manufacturer Code(s) Cat. No. Regal 0020, 0259 Regency 0002 Rembrandt 0011 Runco 0000 SL Marx 0040 Samsung 0144, 0040 Scientific Atlanta 0008, 0477, 0017 Signal 0015, 0040 Signature 0011 Sprucer 0021 Starcom 0003, 0015 Stargate 0015, 0040, 0797 Starquest 0015 TV86 0063 Tandy 0258 Teleview 0040 Tocom 0012, 0013 Toshiba 0000 Tusa 0015 Unika 0153, 0022, 0207 United Artists 0007 Universal 0153, 0022, 0191, 0207 Viewstar 0063,
ملخص المحتوى في الصفحة رقم 20
15-1993.fm Page 20 Wednesday, October 20, 1999 12:03 PM Radio Shack Manufacturer Code(s) Cat. No. Emerson 0305, 0155, 0164, 0469 Fisher 0179, 0174, 0342 GE 0009 Garrard 0420, 0393, 0280 Genexxa 0032, 0305, 0164 Goodmans 0363 Harman/Kardon 0173, 0426 Hitachi 0032, 0155 JVC 0072 Kenwood 0028, 0037, 0190, 0826, 0681 Krell 0157 Kyocera 0018 LXI 0305 Linn 0157 MCS 0029 MTC 0420 Magnavox 0157, 0305 Marantz 0029, 0157, 0180 Mission 0157 NSM 0157 Nikko 0164, 0170, 0174 Onkyo 0101, 0868 Optimus 00
