Metra Electronics 70-5512 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the
INSTALLATION
instructions included with the head unit. Metra recommends making connections
as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends
INSTRUCTIONS
of any unused wires to prevent electrical short circuit.
70-5511
METRA / EIA WIRING CODE
70-5512*
12V Ignition / Acc. . . . . . . . . . Red
12V Batt / Memory. . . . . . . . . Yellow
Ford Premium Sound System Harn

ملخص المحتوى في الصفحة رقم 2

TO INSTALL AN AFTERMARKET RADIO WHILE NOTES KEEPING THE FACTORY AMPLIFIER AND SPEAKERS A Disconnect the negative battery terminal 1 to prevent an accidental short circuit. Unplug the power and output connectors 2 from the factory radio. (Figure A) Splice the wire from the aftermarket 3 radio to the power and amplifier integra- tion harnesses using the color code on page 4 and the instructions included with the aftermarket radio. (Figure B) B Plug the power and amplifier integration 4 harnesses