Shark EP604 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Retractable Cord Stick Vac
OWNER’S MANUAL
Model EP604
120V., 60Hz., 8.5 Amps.
EURO-PRO Operating LLC
U.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-Franc
Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7
Tel. :1 (800) 798-7398
www.sharkvac.com

ملخص المحتوى في الصفحة رقم 2

ملخص المحتوى في الصفحة رقم 3

Model EP604 IMPORTANT SAFETY INSTRUCTIONS When using your vacuum basic safety precautions should always be observed, ONE (1) YEAR LIMITED WARRANTY including the following: EURO-PRO Operating LLC warrants this product to be free from defects in material and To reduce the risk of fire, electric shock, or 1. Read all instructions before using your workmanship for a period of one (1) year from the date of the original purchase. This warranty vacuum. injury: applies only to normal domestic hous

ملخص المحتوى في الصفحة رقم 4

GETTING TO KNOW YOUR RETRACTABLE CORD TROUBLE SHOOTING GUIDE STICK VAC PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 1. Plug unit in firmly. 1. Power cord not firmly plugged into 2. Check fuse or breaker. Replace outlet. fuse/reset breaker. VACUUM WILL 2. No power in wall outlet. 3. Call 1 (800) 798-7398. NOT OPERATE 3. Needs servicing. 4. Turn the unit off and unplug from 4. Thermostat has tripped. outlet. Allow unit to cool down, then restart. 1. Empty and clean dust cup (container).

ملخص المحتوى في الصفحة رقم 5

OPERATING INSTRUCTIONS PRECAUTIONARY MEASURES CAUTION: The suction hole must be Cleaning & Changing the HEPA- IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off open, free of any obstructions at all Type Filter the vacuum cleaner and remove the blocking substance before you times. Otherwise, the motor will start the unit again. PLEASE NOTE: The white pleated overheat and could become damaged. filter material in the HEPA-Type dust 1. Do not operate the vacuum

ملخص المحتوى في الصفحة رقم 6

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Using Your Vacuum Assembling Your Vacuum Cleaner Removing / Cleaning the Dust Cup Cleaning / Replacing the HEPA- 1. Insert the power plug into the wall WARNING: Always remove the power Type Filter Warning: Always unplug the unit from outlet. plug from the wall outlet before electrical outlet before opening the dust 1. To remove the filter cover inside the 2. Press the power On/Off button assembling or removing accessories. cup (container). dust