AudioBahn ABD40J دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PLEASE READ THIS MANUAL
BEFORE OPERATING THIS UNIT.
RETAIN FOR FUTURE REFERENCE.
ABD40J
OWNER’S MANUAL

ملخص المحتوى في الصفحة رقم 2

The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We make you look as good as you sound. We strive to take car audio to an extreme the world has never seen, and a world that never stops evolving. Audiobahn was established in 1997 with one long-term goal in mind, “Build it Bigger, Badder, & Better, and the people will take notice!” We back this statement with an engineering team that ha

ملخص المحتوى في الصفحة رقم 3

TABLE OF CONTENTS Introduction___________________________________________________ 3 Features and Specifications______________________________________ 4 Controls and Functions__________________________________________ 5-6 Installation____________________________________________________ 7 Warning and Disclaimer__________________________________________ 8 Warranty______________________________________________________ 9-10

ملخص المحتوى في الصفحة رقم 4

INTRODUCTION 3 Dear Customer, Congratulations on your purchase of the worlds finest brand of car audio products. Here at Audiobahn Inc. we are devoted to making our musical reproduction the vert best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have

ملخص المحتوى في الصفحة رقم 5

Features and Specifications 4 Because of the variation in the process, we developed the ABD40J to help restore the low frequencies lost during the process, but the acoustics of various environments are different. Sweep control allows you to select a center frequency (the frequency most affected) be- tween 27Hz - 63Hz Width control then allows you to control the range of other filters centered on the frequency Sweep. Bass Processor: Contains circuitry that accurately recreates low frequenc

ملخص المحتوى في الصفحة رقم 6

controls and functions 5 7 8 ABD40 J WIDE POWER MAX BASS CONTROL MIN MAX 5 SWEEP R -35Hz -50Hz -80Hz MIN MAX 6 DIGITAL BASS RECON S TRUCTION PROCESSOR BALANCED INPUT OUTPUT +12V GROUND L R DASH REMOTE L R REMOTE PWR SUB LEVEL MIN MAX 1 3 2 4 1. Balanced Input: Low Input is used to balance the input circuit to help minimize noise. They are designed to handle high voltage signals up to 15 volts. 2. Outputs: RCA connectors must be connected to the next component after the bass processor, like a

ملخص المحتوى في الصفحة رقم 7

CONTROLS AND FUNCTIONS 6 11 10V 7.5V 5V 2.5V GROUND ISO 9 200Ohm UNBAL Left Right 10 BAL 9. Ground input: For most systems you can leave this jumper in the balanced position, for some systems, the power source can find a ground through the RCA connectors. In this case, change the jumpers to the UNBALANCED position. 10. Isolation of jumpers: Occasionally the alternator noise may appear on a system be- cause of the power supply and amplifier different use. Switch the jumper. NOTE: Make sure

ملخص المحتوى في الصفحة رقم 8

Installation 7 ABD40 J WIDE POWER MAX BASS CONTROL MIN MAX SWEEP R -35Hz -50Hz -80Hz MIN MAX DIGITAL BASS RECON S TRUCTION PROCESSOR BALANCED INPUT OUTPUT +12V GROUND L R DASH REMOTE L R REMOTE PWR SUB LEVEL MIN MAX + - BATTERY B + (12V): Connect the red wire to the car battery or other power source. REMOTE: Connect the orange cable to the remote trigger cable (12V DC) of the car or stereo equalizer. GND: Connect the black wire to the chassis for grounding.

ملخص المحتوى في الصفحة رقم 9

Warning And Disclaimer 8 TROUBLESHOOTING GUIDE If the unit does not light up or the LED indicator light does nothing check the following: 1) Check to make sure the +B and GND are not reversed. 2) Check that all cables are connected properly and have adequate power (11-16 volts). 3) Check that the fuse is intact. If you experience high or low volume audible distortion output: 4) Check that the input and output levels are set correctly. 5) Check the crossover, make sure it is correct. For systems

ملخص المحتوى في الصفحة رقم 10

Warranty 9 Audiobahn Consumer Product Warranty Policy Audiobahn products are manufactured with the highest quality components and some of the most advanced technology available. Because of this we recommend that you have your new products installed by an Au- thorized Audiobahn Dealer. (A list of Authorized Audiobahn Dealers can be found on our web page). Warranty Period: One year from the original date of purchase. Warranty Coverage: This warranty covers manufacturer defects only. The warra

ملخص المحتوى في الصفحة رقم 11

Warranty Continued 10 How to receive warranty service: Contact your local Authorized Audiobahn Dealer, or call Audiobahn at (714) 452.1476 between the hours of 9:00AM and 5:00PM PST. If you are having problems with your system, we recommend you check the product carefully and thoroughly to confirm that the product truly has a manufacturer defect; as opposed to abuse, or other components in the system caused the failure. This might include having an Authorized Audiobahn Dealer look at the pr

ملخص المحتوى في الصفحة رقم 12

7050 Village Drive, Bldg G Buena Park, CA 90621 714-452-1476 oce 888-880-8469 fax info@audiobahn.com PROUD SPONSOR OF Follow us on Facebook and Twitter