ملخص المحتوى في الصفحة رقم 1
R R
EN
CDM-7874
CDE-7872
FR
CDE-7870
FM/AM Compact Disc Receiver
ES
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
IT
ALPINE ELECTRONICS, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ELECTRONICS FRANCE S.A.R.L.
Tokyo office: 1-1-8 Nishi Gotanda, 6-8 Fiveways Boulevarde Keysborough, (RCS PONTOISE B 338 101 280)
Shinagawa-ku, Victoria 3173, Australia 98, R
ملخص المحتوى في الصفحة رقم 2
CHA-S634 CHA-1214 CHM-S630 • CD changer for CDM-7874. • Changeur CD pour CDM-7874. • Cambiador de CD para CDM-7874. Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW PLAY BACK. NOTE The CHA-S634 model can be connected to
ملخص المحتوى في الصفحة رقم 3
ENGLISH Contents CD Player Operation Operating Instructions Inserting/Ejecting Disc ................................... 12 Normal Play and Pause ................................... 13 WARNING Music Sensor (Skip)........................................ 13 WARNING .................................................. 2 Fast Forward and Backward ........................... 13 CAUTION ................................................... 2 Repeat Play .....................................................
ملخص المحتوى في الصفحة رقم 4
WARNING DO NOT PLACE HANDS, FINGERS OR FOREIGN WARNING OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the The exclamation point within an equilateral product. triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Failure to heed the instructions will result in CAUTION severe injury or death. The exclamation point within an equilateral triangle and "CAUTION" are intended to alert DO NOT OPERATE ANY FUNCT
ملخص المحتوى في الصفحة رقم 5
Never Attempt the Following Installation Location Make sure the CDM-7874/CDE-7872/CDE-7870 will not Do not grip or pull out the disc while it is being pulled be installed in a location subjected to: back into the player by the automatic reloading mechanism. • Direct sun and heat Do not attempt to insert a disc into the unit when the unit • High humidity and water power is off. • Excessive dust • Excessive vibrations Handling the Detachable Front Panel • Do not expose to rain or water. • Do not d
ملخص المحتوى في الصفحة رقم 6
Basic Operation POWER BAND MODE/BBE (Rotary encoder) POWER BAND 2 2 2 2 2 MODE/LOUD g DN f UP SETUP MUTE g DN 1 1 1 1 1 MUTE/ f UP SETUP (CDM-7874) (CDE-7872/CDE-7870) Detaching the Front Panel Initial System Start-Up 1 Press the POWER button for more than 3 Immediately after installing or applying power to the seconds to turn off the power. unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to 2 Press the (Release) button at lower left
ملخص المحتوى في الصفحة رقم 7
Subwoofer On and Off Turning Loudness On/Off (CDE-7872/CDE-7870 only) 1 Press the SETUP button for at least 3 seconds. 2 Press the g DN or f UP button to select Loudness introduces a special low- and high- the Sub-w mode. (CDM-7874 only) frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to 3 Press the BAND button to select Subwoofer ON bass and treble sound. or OFF. 1 Press and hold the LOUD button for at least 4 After setting is completed, press t
ملخص المحتوى في الصفحة رقم 8
Basic Operation SOURCE BAND Rotary encoder g DN BAND 2 2 2 2 2 f UP g DN BASS C. TREBLE C. DISP SETUP f UP CENTER f 1 1 1 1 1 DISP (CDM-7874) (CDE-7872/CDE-7870) Setting the AUX Mode Displaying Time (CDM-7874 only) 1 Press the DISP button repeatedly until the clock time is displayed. You can input TV/video sound by connecting an Each press changes the modes as follows: optional "M-Bus V-Link" (M-Bus/RCA interface Radio mode cable KCM-122B) to this component. Clock priority Radio frequency ↔ mode
ملخص المحتوى في الصفحة رقم 9
Setting the Bass Control Setting the Treble Control You can change the Bass Frequency emphasis to You can change the Treble Frequency emphasis create your own tonal preference. to create your own tonal preference. 1 1 Press the TREBLE C. button to turn on the Treble Press the BASS C. button to turn on the Bass setting mode. setting mode. Press the CENTER f button to select the Treble Press the CENTER f button to se
ملخص المحتوى في الصفحة رقم 10
Basic Operation BAND g DN f UP CLK SETUP ZERO HOUR MIN Setting Time 3 Press BAND button to switch the display pattern. → DISP1 → DISP2 → DISP OFF 1 While the clock time is displayed, press and hold the CLK (clock) button for at least 3 seconds. DISP1: The time indication will begin to blink. Lights the Volume indicator and Audio Level indicator. 2 Press the ZERO button while the time indication Volume indicator is blinking to set seconds to "0". 3 Press the HOUR button to adjust the hours
ملخص المحتوى في الصفحة رقم 11
Radio Operation SOURCE TUNE BAND g DN f UP Manual Tuning Automatic Seek Tuning 1 Press the SOURCE button until a radio 1 Press the SOURCE button until a radio frequency appears in the display. frequency appears in the display. 2 Press the BAND button repeatedly until the 2 Press the BAND button repeatedly until the desired radio band is displayed. desired radio band is displayed. Each press changes the band: Each press changes the band: → F1(FM1) → F2(FM2) → AM → F1(FM1) → F2(FM2) → AM 3 Press
ملخص المحتوى في الصفحة رقم 12
Radio Operation SOURCE A.ME BAND/D.A.P. Preset button (1 through 6) Manual Storing of Station Presets Automatic Memory of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 1 Press the SOURCE button to select the radio mode. 2 Press and hold the Preset buttons (1 through 6) that you want to store the station on for at 2 Press the BAND button repeatedly until the least 2 seconds. desired radio band is displayed. The selected station
ملخص المحتوى في الصفحة رقم 13
Storing into Direct Access Preset Tuning to Preset Stations (D.A.P.) Band 1 Press the SOURCE button to select the radio mode. A combination of radio stations in any band (up to 2 Press the BAND button repeatedly until the 6 stations) can be manually preset into the D.A.P. desired band is displayed. band. To select the D.A.P. band, press and hold the D.A.P. button for more than 2 seconds until the 1 Press and hold the D.A.P. button for more than 2 D.A.P. indicator appears in the display. seconds
ملخص المحتوى في الصفحة رقم 14
CD Player Operation - / J c g DN f UP F M.I.X. REPEAT SCAN (CDM-7874 only) Inserting/Ejecting Disc About the usable discs. We recommend using only compact discs 1 Insert a CD half way into the slot with the label containing the marks shown below. side facing up. The player automatically draws You can play CD-Rs (CD-Recordable)/CD-RWs the disc into the disc compartment. (CD-ReWritable) for audio use on this unit. You can not also play CD-Rs/CD-RWs containing MP3 formatted audio files. • Some of
ملخص المحتوى في الصفحة رقم 15
Normal Play and Pause Repeat Play 1 Insert a CD. The CD player begins playback from 1 Press the REPEAT button to play back the first track on the disc. repeatedly the track being played. The RPT or REPEAT indicator appears and the track will be played repeatedly. Press the REPEAT button again and select OFF to deactivate the repeat play. NOTE If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the The display shows the track number and elap
ملخص المحتوى في الصفحة رقم 16
CD Player Operation SOURCE Disc Select buttons (1 through 6) Controlling CD Changer (Optional) (CDM-7874 only) If an optional Alpine 6-disc CD Changer is connected to the 8-pin DIN connector (M-Bus) of the CDM-7874, you can control the CD changer using the CDM-7874. NOTE The CD controls on the CDM-7874 for the CD changer operation are functional only when the CD Changer is interconnected with the CDM-7874. 1 Press the SOURCE button to activate the CHANGER mode. The display shows the "Changer", d
ملخص المحتوى في الصفحة رقم 17
Information CD In Case of Difficulty CD Player/Changer (CDM-7874 only) not functioning. If you encounter a problem, please turn the power off, • Out of operating temperature range +50˚C (+120˚F) for then on again. If the unit is still not functioning CD. normally, please review the items in the following - Allow the vehicle's interior (or trunk) temperature to checklist. This guide will help you isolate the problem cool. if the unit is at fault. Otherwise, make sure the rest of CD playback soun
ملخص المحتوى في الصفحة رقم 18
Information Indication for CD Changer Indication for CD (CDM-7874 only) HI TEMP – – – H HI TEMP (CDM-7874 only) (CDE-7872/CDE-7870 only) • Protective circuit is activated due to high temperature. • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature - The indicator will disappear when the temperature returns to within operation range. returns to within operation range. ERROR – – – E ERROR - 01 (CDM-7874 only) (CDE-7872/CDE-7870 only) • Ma
ملخص المحتوى في الصفحة رقم 19
Specifications FM TUNER SECTION Tuning Range 87.7 – 107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.0 dB AM TUNER SECTION Tuning Range 530 – 1,710 kHz Sensitivity (IEC Standard) 22.5 µV/27 dB CD PLAYER SECTION Frequency Response 5 – 20,000 Hz (±1 dB) Wow & Flutter (% WRMS) Bleow measurable limits Total Harmonic Distortion 0.008% (
ملخص المحتوى في الصفحة رقم 20
Installation and Connections Before installing or connecting the unit, please USE SPECIFIED ACCESSORY PARTS AND INSTALL read the following and pages 2 and 3 of this THEM SECURELY. manual thoroughly for proper use. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit Warning internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards MAKE THE CORRECT CONNECTIONS. or product failure. Fail
