ملخص المحتوى في الصفحة رقم 1
SNV90
OWNER’S MANUAL
Mobile Video System
www.lanzar.com
ملخص المحتوى في الصفحة رقم 2
SAFETY INSTRUCTIONS Please read this section carefully and follow all the instructions given. This will help ensure reliable operation and extend the service life for your appliance. • Keep the packaging and the user instructions for future reference or inquiries. 1) Never open up the housing of the appliance, it contain no user-serviceable parts. If the housing is opened there is a danger to life from electric shock. Do not place any objects and do not exert any pressure on the appliance. 2) Ne
ملخص المحتوى في الصفحة رقم 3
SAFETY INSTRUCTIONS • Arrange cables so that no-one can tread on them or trip over them. Do not place any items on the cable. • Working with memory card This navigation system supports SD memory cards. 1)Inserting memory cards: Carefully take the memory card out of its packing (if included). Take care not to touch or dirty the contacts. Push the memory card carefully into the card slot. The side of the memory card wearing the label must point upwards. The memory card should slightly lock in plac
ملخص المحتوى في الصفحة رقم 4
INSTALLATION • Mounting The Navigation Set In A Car Use 4 screws ( 5X25) to install the navigation set to the car, please refer to the followed diagram. 4
ملخص المحتوى في الصفحة رقم 5
ACCESSORIES • GPS BOX • REMOTE CONTROL • GPS ANTENNA • REMOTE SENSOR • RGB TO RGB CABLE • RGB TO RCA VIDEO LINEOUT • SD CARD • SCREW 5X25 (4 PCS) 5
ملخص المحتوى في الصفحة رقم 6
GPS BOX One Side 1 2 Other Side 3 4 5 6 1. GPS ANT (GPS Antenna, To receive GPS signal.) 2. Socket (Connect GPS Box And The Unit) 3. RGB/VIDEO Switch (Switch between RGB mode and VIDEO mode.) 4. RESET (Reset Button) 5. PWR (Power Indicator LED) 6. SD (SD Card Interface) 6
ملخص المحتوى في الصفحة رقم 7
REMOTE CONTROL 9 1 8 2 3 7 4 6 5 1. ESC Press it to exit the current menu. 2. (ENTER) Press it to enter the selected item. 3. / , / These buttons serves as navigation-pad, moves up / down / left / right by pushing the corresponding area of the pad. 4. VOL+/- Press VOL+/- buttons to increase/decrease the sound. 5. Zoom out button. 6. Zoom in button. 7. Control Press it to enter control interface. 8. (MENU) Press it to enter the navigation menu. 9. POWER Press it to turn the GPS box on or of
ملخص المحتوى في الصفحة رقم 8
ELECTRICAL CONNECTION Wiring (1) GPS BOX EXTERAL ANTTENA 20 PIN Wiring (2) GPS BOX EXTERAL ANTTENA (WHITE) R (RED) AUDIO L OUT RGB OUT G (GREEN) RCA OUT (RED) AUDIO R OUT B (BLUE) SYNC (YELLOW) (BROWN) VIDEO OUT B+ (YELLOW) REMOTE SENSOR ACC (RED) CONNECTOR (BLACK) GROUND (BLACK) (OPTIONAL) EXTERNAL REMOTE SENSOR (OPTIONAL) (OPTIONAL) 8
ملخص المحتوى في الصفحة رقم 9
OPERATION • Console confirm the screen adjustment. When all the connections is finished, turn the unit on, switch the mode to navigation mode, the unit will enter the following interface automatically. 2) Tap to enter screen calibration mode, and you can see a plus displayed on screen. Tap the plus firmly, the plus will continue to move until the screen is aligned. And “OK” will appear on Note: If you have set “Auto navigation screen, tap OK will exit screen when power on”, when you turn on
ملخص المحتوى في الصفحة رقم 10
OPERATION 6)Tap to enter volume option menu. Use the remote control or tap icon to see following two navigation interface: There are two method to adjust the volume: Method A: When you select or , press OK button on remote control to adjust the system volume level. Method B: When you select , press / (Left/Right) buttons on remote control to adjust the volume up or down. Tap chock box to mute the Tap to enter destinations menu: sound. Tap to select keyclick and screenclick volume type
ملخص المحتوى في الصفحة رقم 11
SOFTWARE OPERATION 1) When all the connections is finished, turn the unit on, switch the mode to navigation mode, the unit will enter the following interface automatically. Tap icon to enter Device interface, then select StorageCard folder. Note: If you have set “Auto navigation when power on”, when you turn on the unit, it will skip Console interface and enter navigation interface automatically. Double tap the StorageCard folder to open it and select NaInstall.exe file. Tap Agree, the followin
ملخص المحتوى في الصفحة رقم 12
SOFTWARE OPERATION When the installation is finished it will return to Console interface automatically. 5) Tap icon to enter Setting menu, then tap in Setting menu to enter Navi Option menu: Tap to enter Device menu: Double tap NANDFlash folder to open it : Double tap Destinator folder to enter it and select Dextinator.exe, then tap to exit current menu. 6) Return to Console interface, Tap icon will enter navigation Interface. 12
ملخص المحتوى في الصفحة رقم 13
8800-0G9013-
