ملخص المحتوى في الصفحة رقم 1
Maintenance
Marshall Electronics
■
Screen Cleaning
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressu
ملخص المحتوى في الصفحة رقم 2
Specifications (continued) 2 23
ملخص المحتوى في الصفحة رقم 3
Specifications Contents Product Overview.....................................................................................................................................................................................................................................4 ■ ■ PANEL RS-422/485 SERIAL INTERFACE (RJ12) Features................................................................................................................................................................................
ملخص المحتوى في الصفحة رقم 4
On-Screen Menu (continued) Product Overview IMD CONFIGURATION SUBMENU (continued) The V-R201-IMD-TE is a 20.1” LCD monitor with HD-SDI inputs and In-Monitor Display functionality – a cost-effective "all- in-one" solution for post-production houses, broadcasters, and mobile units. This fully integrated approach eliminates the ■ Tally Source need for additional or separate Under Monitor Displays and allows UMD information and tallies to be displayed directly within a Marshall flat panel monitor, w
ملخص المحتوى في الصفحة رقم 5
On-Screen Menu (continued) Installation and Initial Setup IMD CONFIGURATION SUBMENU (continued) ■ Unpacking ■ IMD ID # Carefully unpack the V-R201-IMD-TE monitor and verify that the following items are included: The IMD ID # identifies each screen to the controlling device. When using the TSL protocol, the ID # of each screen • V-R201-IMD-TE Monitor should be manually set in conjunction with the controlling device. When using the Image Video protocol, the ID # may • V-PS12-6.6-A Power Supply wit
ملخص المحتوى في الصفحة رقم 6
On-Screen Menu (continued) Top and Front Panel Features IMD CONFIGURATION SUBMENU ■ Overview The V-R201-IMD-TE features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below). Alternately, IMD text and tally can be remotely controlled via the RS-422/485 serial interface using several industry- standard protocols, including TSL and Image Video. Multiple V
ملخص المحتوى في الصفحة رقم 7
On-Screen Menu (continued) Rear Panel Features OSD CONFIGURATION SUBMENU (continued) ■ LED Tally Use this setting to enable or disable the LED Tally. When enabled, the yellow, red and green LEDs above each display will respond to tally commands, according to the Tally Source setting (see page 21). ■ Time Code 1 Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data (VANC) within the SDI signal. Two types of time code can be selected
ملخص المحتوى في الصفحة رقم 8
On-Screen Menu (continued) Compatible Input Formats OSD CONFIGURATION SUBMENU (continued) The following SDI standards are supported by the V-R201-IMD-TE: ■ OSD Tally 525i, 625i 1035i/60, 1035i/59.94 1080i/60, 1080i/59.94, 1080i/50 Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally 1080psF/24, 1080psF/23.98 Source selected in the IMD Configuration submenu (see page 19). 720p/60, 720p/59.94, 720p/50 When the Tally Source is set to S
ملخص المحتوى في الصفحة رقم 9
On-Screen Menu (continued) On-Screen Menu (continued) OSD CONFIGURATION SUBMENU MAIN MENU AND NAVIGATION Access and navigate the main menu using the 4 menu buttons or the RotoMenu ™ knob: Use the OSD Configuration submenu to select a variety of information to be displayed on the screen. OSD Configuration Submenu Main Menu ■ IMD State Use this setting to turn the IMD text display on or off. This setting affects both fixed string IMD text and remote IMD text commands (see IMD Configuration Submenu
ملخص المحتوى في الصفحة رقم 10
On-Screen Menu (continued) On-Screen Menu (continued) MARKER SETUP SUBMENU SYSTEM CONFIGURATION SUBMENU Use the Marker Setup submenu to select various types of markers and settings in 4:3, 16:9, or Full Screen modes. Use the System Configuration submenu to control various system parameters. System Configuration Submenu ■ Gray Levels Marker Setup Submenu Use the Gray Levels menu option to view 32 levels of flat field gray. This feature is useful for color temperature ■ 16:9 Markers comparison and
ملخص المحتوى في الصفحة رقم 11
On-Screen Menu (continued) On-Screen Menu (continued) MARKER SETUP SUBMENU (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ 4:3 Markers ■ Aspect Ratio Settings (continued) Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9 or Full Screen, and when Pixel-to-Pixel mode is enabled. • Off (No Marker) • 95% Safe Area • 93% Safe Area • 90% Safe Area • 88% Safe Area • 80% Safe Area 4:3 Marker Examples: 00:0
ملخص المحتوى في الصفحة رقم 12
On-Screen Menu (continued) On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU VIDEO CONFIGURATION SUBMENU (continued) Use the Video Configuration submenu to select various video settings, such as color temperature, monochrome mode, or ■ Pixel-to-Pixel Mode blue-only mode. Use this setting to enable Pixel-to-Pixel mode. This mode bypasses the monitor’s internal scaling function and displays images in their native resolution and aspect ratio, with a one-to-one mapping of incoming image pixels
