ملخص المحتوى في الصفحة رقم 1
Operating Instructions
LCD Video Monitor
P
Model No. BT- E
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
@
S0306W1106 -F
Printed in Japan VQT0X58-1
ملخص المحتوى في الصفحة رقم 2
Read this first! (For BT-LH900AP) FCC Note: CAUTION This equipment has been tested and found to comply RISK OF ELECTRIC SHOCK with the limits for a class A digital device, pursuant to DO NOT OPEN Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). interference when the equipment is operated in a NO USER SERVICEABLE PARTS INSIDE. commercial environment. This equipment
ملخص المحتوى في الصفحة رقم 3
Read this first! (For BT-LH900AE) $DO NOT REMOVE PANEL COVERS BY CAUTION: UNSCREWING THEM. In order to maintain adequate ventilation, do not To reduce the risk of electric shock, do not remove install or place this unit in a bookcase, built-in the covers. No user serviceable parts inside. cabinet or any other confined space. To prevent Refer servicing to qualified service personnel. risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obst
ملخص المحتوى في الصفحة رقم 4
Contents Precautions for use . . . . . . . . . . . . . . . . . . 4 How to use the on-screen menus . . . . . 12 Standard accessory . . . . . . . . . . . . . . . . . . 4 Menu operations . . . . . . . . . . . . . . . . . . . 14 Optional unit . . . . . . . . . . . . . . . . . . . . . . . 4 User data . . . . . . . . . . . . . . . . . . . . . . . . . 15 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 MAIN MENU . . . . . . . . . . . . . . . . . . . . . . . 16 Parts and their functions .
ملخص المحتوى في الصفحة رقم 5
2-M3 Introduction Designed for use in broadcasting and commercial applications, the model BT-LH900A is a slim-line and lightweight liquid crystal video monitor with an 8.4-type liquid crystal screen. For use, secure it in place by, for instance, installing it in a rack by using the optional rack-mounting adapters BT-MA900G or mounting it on a tripod. ∫ Slim design, light weight, compact size, low ∫ Functions power consumption and driven by DC The main controls can be relocated to the bottom surf
ملخص المحتوى في الصفحة رقم 6
Parts and their functions 3 HD ZOOM/X X button 1 This button is used to move the cursor or change settings while a menu is displayed. If there is no menu display, it turns the HD ZOOM function ON or OFF. When the button is pressed, both the left and right sides of the images with a 16:9 aspect ratio produced by HD signals are cut off, and images with a 4:3 aspect ratio are displayed on the entire screen. When it is pressed, the original images are restored. The HD zoom function does not work w
ملخص المحتوى في الصفحة رقم 7
Parts and their functions (continued) 5 FUNCTION/ENTER button This button is used to enter changes or settings while a 1 2 3 4 menu is displayed. If there is no menu display, the button’s function changes depending on which FUNCTION item on the PEAK/PHASE CHROMA BRIGHT CONTRAST menu is selected. One of the following three items can be selected. (Refer to page 20) UNDEF: No function is allocated to this item. 4 Image controls HV DELAY: Image blanking is displayed. Each time These controls are
ملخص المحتوى في الصفحة رقم 8
Parts and their functions (continued) @ 5 6 7 Y/G VIDEO IN : OUT PB/B ; SDI 1 PR/R IN SYNC SDI 2 IN < SWITCHED CONTROL OUT = POWER GPI > DC IN RS-232C ? @ A 8 9 5 = Battery holder SDI output connector This holder is used with a battery made by Anton/Bauer. The SDI signals are output from this connector. It is the switched output of the < SDI input connectors. The signals displayed on the screen, whether they are the 6 Analog component/RGBS connectors ones supplied to the SDI 1 connector or SDI
ملخص المحتوى في الصفحة رقم 9
Relocating the main controls The main controls can be relocated to the bottom surface or right panel of the monitor depending on such factors as where and how the monitor will be used. Before relocating the main control, make absolutely sure that the power has been turned off. Disconnect the cord connecting the main controls to the Use the two screws to secure the main controls to the 1 4 main unit. right panel. Take hold of this part and pull it free to disconnect the cable. Remove the s
ملخص المحتوى في الصفحة رقم 10
Supplying the power An Anton/Bauer or V-mount type of battery pack or an external DC power supply can be used to power this monitor. Using the Anton/Bauer type Using a V-mount type battery battery pack pack Install the Anton/Bauer type of battery pack. 1 CAUTION: Battery pack These servicing instructions are for use by qualified service personel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operaiting instructions unless you are qualif
ملخص المحتوى في الصفحة رقم 11
Supplying the power (continued) Using an external DC power supply Connect the external DC power supply to the DC IN 4 1 1 socket on this unit. 2 3 1: GND 4: +12 V DC IN socket DC IN socket ≥DC cords should be no longer than 2 meters. Use of cords any longer than 2 meters may result in noise appearing on the screen. ≥If the battery pack and an external DC power supply are connected simultaneously, then the external DC power supply will have priority. If the external DC power supply is us
ملخص المحتوى في الصفحة رقم 12
How to use the on-screen menus Four kinds of information—menus, status displays, image control settings and battery voltage—can be displayed on the screen. Menu display This display appears when the MENU/EXIT button is pressed. If no further action is taken for the next 120 [MAIN MENU] seconds, the display will be automatically cleared. 1 MARKER 4 The position where the display appears on the screen can be VIDEO CONFIG 4 SYSTEM CONFIG 4 changed using the ma
ملخص المحتوى في الصفحة رقم 13
How to use the on-screen menus (continued) Image control display The image control information is displayed when an image has been adjusted using the image controls. (Refer to page 7) It appears when a control has been pressed in so that it has popped out or when an adjustment is made by turning an already popped out control. [CONTRAST] 50 It is cleared when a control is pressed again and returned to its original position. It is also cleared when a popped out control is not touched for
ملخص المحتوى في الصفحة رقم 14
Menu operations Use the HD ZOOM/X button and BLUE/W button to Menu operations 4 change the setting, and press the FUNCTION/ENTER button to enter the change. When the MENU/EXIT button is pressed, the main menu 1 Alternatively, the change will be canceled when the appears on the screen. MENU/EXIT button is pressed instead. Displayed in green. [MARKER] 1 MARKER SELECT GPI MARKER 16:9 OFF MARKER 4:3 OFF MARKER BACK NORMAL CENTER MARKER OFF GPI PRESET1
ملخص المحتوى في الصفحة رقم 15
User data This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required. The following data can be saved and loaded as user data files: ≥ All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER MODE LOAD/SAVE ≥ Screen values which have been adjusted by the image controls Saving the user data Loading the user data When
ملخص المحتوى في الصفحة رقم 16
MAIN MENU Menu configuration MAIN MARKER SELECT MARKER MARKER 16:9 MARKER 4:3 GAMMA SELECT MARKER BACK VIDEO CONFIG FILM GAMMA CENTER MARKER COLOR TEMP. GPI PRESET1 SHARPNESS MODE GPI PRESET2 SHARPNESS H SHARPNESS V I-P MODE MONO SD ASPECT BACKLIGHT SYSTEM CONFIG FUNCTION WFM BATTERY REMAIN HD ZOOM OSD CONFIG STATUS DISPLAY PEAKING/PHASE CRCC MESSAGE USER MODE LOAD MENU POSITION USER MODE SAVE STATUS POSITION ROTARY POSITION GPI1 GPI GPI2
ملخص المحتوى في الصفحة رقم 17
MAIN MENU (continued) Menu items MARKER Item Setting Description Item Setting Description MARKER SELECT MENU For setting whether the marker display GPI PRESET1 4:3 For setting the markers to be displayed if, GPI settings are to be performed using the 13:9 when MARKER1 ON/OFF has been menu or from the GPI connector. 14:9 allocated to any item and GPI has been MENU:The operations are performed using VISTA selected as the MARKER SELECT item the menu. Operations from the GPI CNSCO setting on the GP
ملخص المحتوى في الصفحة رقم 18
MAIN MENU (continued) Types of markers 16:9 markers (These appear when HD signals or when SD signals with a 16:9 aspect ratio are supplied.) Markers are displayed only in the form of vertical lines. The shaded areas indicate what is set by the MARKER 80% area markers BACK item. 4:3 markers (These appear when SD signals with a 4:3 aspect ratio are supplied.) Dotted lines are displayed as the markers. 4:3 markers 13:9 markers 95% area markers 93% area markers 14:9 markers VISTA markers and CNSCO m
ملخص المحتوى في الصفحة رقم 19
MAIN MENU (continued) VIDEO CONFIG Item Setting Description Item Setting Description GAMMA SELECT GPI For setting the gamma mode. SHARPNESS H 0 For setting the image sharpness in the : NORMAL GPI: This is the GPI setting. For horizontal direction. 2 FILM details, refer to “REMOTE : This item enables two settings, one for the specifications” (page 23). VIDEO input signals and one for other 30 NORMAL:The normal gamma mode is signals, to be stored in the memory. established. FILM: The film
ملخص المحتوى في الصفحة رقم 20
MAIN MENU (continued) SYSTEM CONFIG OSD CONFIG Item Setting Description Item Setting Description BACKLIGHT 0 For adjusting the backlight brightness to a BATTERY REMAIN OFF For selecting whether to display the : level from 0 to 60. The higher the setting, ON remaining battery charge. 60 the brighter the backlight. OFF: The remaining charge is not displayed. ON: The remaining charge is displayed. FUNCTION WFM For setting the function to be allocated to ON/OFF the FUNCTION/ENTER button. STATUS DIS
