Russound VMR1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Safety Precautions Specifi cations
VMR1
®
Device type: Single-gang in-wall Decora -style
1. Read these instructions.
Input connector: 110 punch-down block
Video Matrix Receiver
2. Keep these instructions
System cable: CAT-5e
Instruction Manual
3. Heed all warnings. Maximum cable length: 300 ft (90 m)
Output connectors: (3) RCA jacks for component video
4. Follow all instructions.
Video resolution: Up to 1080p
5. Do not use this apparatus near water.
Dimensions: 1.75” W x 4.17” H x 1.31” D

ملخص المحتوى في الصفحة رقم 2

Installation 1. Run CAT-5e cable up to 300 feet (90 m) between the VM1 and the video display locations in the zones. Note: When running CAT-5e cables, avoid AC power wiring. If you have to run the cables parallel to electrical wiring, space the cable at least 12 inches (30 cm) from AC power lines. 2. Install single-gang UL/CSA-approved plastic wall boxes for the VMR1 receivers. Attach the boxes to the wall with appropriate fasteners. 3. In each zone, punch down the CAT-5e cable on the back