ملخص المحتوى في الصفحة رقم 1
Vista 15” TFT LCD MONITOR
USER
MANUAL
MODEL: VFSM15
ملخص المحتوى في الصفحة رقم 2
Table of Contents ● FCC Information - 2 ● Safety Precautions - 2 1. General Features - 4 2. Setting Up - 5 3. Controls and Indicators - 6 4. On Screen Display - 8 5. Specifications - 12 1
ملخص المحتوى في الصفحة رقم 3
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no gu
ملخص المحتوى في الصفحة رقم 4
8. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest on the power cord. 9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of any kind on the unit. 10. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth. Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO CLEAN THE INTERIOR OF THIS UNIT-THIS ACTION MUST BE P
ملخص المحتوى في الصفحة رقم 5
1.GENERAL FEATURES This is a high performance 15" TFT LCD monitor with a 1024x768 XGA resolution. The LCD monitor has been designed for use with both PC and security systems, comply with the power management regulations of VESA DPMS, supported by Plug & Play, complying with DDC1/2B. FEATURES 90~264V AC Power Supply NTSC/PAL Auto-Detector High Resolution PC Input Dual Video Input/Output Dual Audio Input/Output Y/C Input Up to 16M Colors Built-in Auto Channel Scanning OSD With
ملخص المحتوى في الصفحة رقم 6
2.SETTING UP Read this chapter for important safety information and how to set up and connect the display to your computer or camera. Check the attachment of monitor. There are power cord, user’s manual and PC signal cable. Make sure the surface for placing the LCD monitor is stable and level. Keep the monitor away form sources of liquids and moisture. Keep the monitor’s vents free from obstruction. If you will not be using the monitor and computer for a day or more, make sure to t
ملخص المحتوى في الصفحة رقم 7
3.CONTROLS AND INDICATORS 3.1 FRONT PANEL a. CHANNEL BUTTON Select channel Press this button to choose the channel to be displayed. Auto scan Press the button over 2 seconds until the power LED changes to yellow color. b. MENU BUTTON Press the button to show the main OSD menu. Press the button for the second time to show the sub OSD menu after the main menu is elected. c. BUTTONS Press buttons to select an icon in the main me
ملخص المحتوى في الصفحة رقم 8
3.1 BOTTOM PANEL a. PC input b. Y/C input c. Video(CVBS) 1 input d. Video(CVBS) 1 output e. Video(CVBS) 2 input f. Video(CVBS) 2 output g. Audio L input h. Audio L output i. Audio R input j. Audio R output 7
ملخص المحتوى في الصفحة رقم 9
4 ON SCREEN DISPLAY (OSD) 4.1 PC MODE Press buttons to select an icon, then Press MENU button to change the values in the sub menu. C O N T R A S T >>> RGB ((( ))) EXIT 1 0 2 4 X 7 6 8 4 8 K 6 0 H Z CONTRAST Press buttons to adjust the contrast value, then press MENU button to return to the main menu. BRIGHTNESS Press buttons to adjust the brightness value, then press MENU button to retur
ملخص المحتوى في الصفحة رقم 10
return to the main menu. 9
ملخص المحتوى في الصفحة رقم 11
RGB COLOR Press buttons to select a color and press buttons to adjust the value of selected color, then press MENU button to return to the main menu. AUTO ADJUST Automatic adjusting of H position, V position, phase and clock values. TRUE COLOR True color can upgrade the panel’s color from 262K to 16M and vice versa. VOLUME Press buttons to adjust the volume value, then press MENU ((( ))) button to return to the main menu.
ملخص المحتوى في الصفحة رقم 12
4.2 Video mode Press buttons to select a icon, then Press MENU button to change the values in sub menu. B R I G H T N E S S RGB ((( ))) >> EXIT C V B S 1 I N P U T BRIGHTNESS Press buttons to adjust the brightness value, then press MENU button to return to the main menu. CONTRAST Press buttons to adjust the contrast value, then press MENU button to return to the main menu. RGB COLOR Press buttons to adj
ملخص المحتوى في الصفحة رقم 13
TRUE COLOR True color can upgrade the panel’s color from 262K to 16M and vice versa. OSD H POSITION Press buttons to adjust the horizontal location of OSD, then press MENU button to return to the main menu. OSD V POSITION Press buttons to adjust the vertical location of OSD, then press MENU button to return to the main menu. LANGUAGE Select the language to be used in OSD. RECALL Reset all of the values to factory preset values. TITLE ENABLE En
ملخص المحتوى في الصفحة رقم 14
Type LCD Panel 15” TFT Color Colors 262K colors Viewable Size 15" 304.1mm (H) x 228.1mm (V) Dot Pitch 0.297mm x 0.297mm Viewing Angle(L/R/T/B) 60/60/45/55 Contrast Ratio 300:1 2 Brightness 200 cd/m Resolution 1024 x 768 User's Controls Power, Channel, Menu, Up, Down, Left, Right Power, Auto_Adj, Menu, Up, Down, Left, Right Power Input voltage AC 90 to 264V ( 60 / 50Hz) or DC 12V Consumption Normal: 35W(max); Standby: 5W(max) Agency Approval ETL, ETL-C
ملخص المحتوى في الصفحة رقم 15
ملخص المحتوى في الصفحة رقم 16
3121-0301-03 REV: 01 -15-
