Smeg KSE 71X دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Libretto istruzioni
Cappe aspiranti KSE 61X/ 71X/ 91X
Manual de Instrucciones
Campanas Extractoras KSE 61X/ 71X/ 91X
Bedienungsanleitung
Dunstabzugshauben KSE 61X/ 71X/ 91X
Instructions Manual
Kitchen Hoods KSE 61X/ 71X/ 91X
Manuel d’instructions
Hottes aspirantes KSE 61X/ 71X/ 91X
Manual de Instruções
Exaustores KSE 61X/ 71X/ 91X
Bruksanvisning
Köksfläktar KSE 61X/ 71X/ 91X
Gebruiksaanwijzing
Afzuigkappen KSE 61X/ 71X/ 91X
Инструкция по эксплуатации
Кухонные вытяжки KSE 61X/ 71X/ 91X
Rev. 11

ملخص المحتوى في الصفحة رقم 2

container. The fat accumulated in the filters Dear client: may drip or catch fire when the Congratulations on your choice. We are sure temperature increases. that this modern, functional and practical • Avoid cooking under the kitchen hood if the appliance, made with top quality materials, metal filters are not fitted, e.g.: while they will fully satisfy your needs. are being cleaned in the dishwasher. Please read every section of this • You must not produce flames under the INSTRUCTIONS MANUA

ملخص المحتوى في الصفحة رقم 3

Instructions for use Index Page You can control the kitchen hood by operating the controls as shown in the diagram. Description of the appliance 15 Instructions for use 15 Cleaning and maintenance 16 Problem solving 16 Sizes and specifications 16 Accessories supplied 17 Installation 17 Active charcoal filters 17 Description of the appliance A On/ Off Push button,

ملخص المحتوى في الصفحة رقم 4

The metal filters can be cleaned by soaking Cleaning and maintenance them in hot water with neutral detergent until During cleaning and maintenance work, the fat dissolves and then rinsing them under make sure the safety instructions set out the tap or using special anti-grease products. on page 14 are fully satisfied. They can also be washed in a dishwasher. In this case, it is advisable to stack them vertically to avoid food residues to stick to Cleaning the hood body them. • If your kitchen

ملخص المحتوى في الصفحة رقم 5

the tubecovers. Accesories supplied 9) Fit the clips (F) to the support (C). 1 150/ 120 mm reduction. 10) Centre the support (C) around the shape 1 Anti-recoil valve. marked; trace and drill the fixing points for the wall plugs (E) (Ø6 x 30). Attach the support (C) 2 Support for tubecover. with the long bolts (D) (Ø4 x 30). 4 Wall plugs (Ø6 x 30). 11) Fit the part (B) if the inner tube (not 4 Wall plugs (Ø8 x 40). supplied) is Ø120. 4 Long bolts (Ø4 x 30). 12) Attach the inner tube with a clamp

ملخص المحتوى في الصفحة رقم 6

* Se Informationsbricka inuti fläktkåpan. * Zie beschrijving van de eignschappen in het interieur van de afzuigkap. * проверьте табличку характеристик внутри вытяжки 38

ملخص المحتوى في الصفحة رقم 7

1 2 39