Pentek دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Water Filter
Installation and Operating Instructions
Specifications
Filter Housing Temperature Range Pressure Range Optional Accessories
3/4-inch I/O 40–125°F (4.4–51.7°C) 30-125 psi (2.1-8.62 bar) Mounting Bracket (151011)
Spanner Wrench (150295)
1/4, 3/8, 1/2-inch 40–125°F (4.4–51.7°C) 30-125 psi (2.1-8.62 bar) Mounting Bracket (244047)
I/O Spanner Wrench (150539)
1-inch, 1-1/2-inch 40–100°F (4.4–37.8°C) 30-100 psi (2.1-6.89 bar) Mounting Bracket (150062)
I/O Spanner Wrench (150296)
Tools Req

ملخص المحتوى في الصفحة رقم 2

x Whole House Installation (1/2 inch or 3/4-inch main cold water line) 1 Materials Required: (2) 3/4-inch or 1/2-inch NPT compression fittings ® Teflon tape Reducing adapters (if necessary) NOTE: • Reducing adapters can be used to adapt the filter to different pipe sizes. See your local hardware store or plumbing store for help in selecting the necessary adapters and com- 2 pression fittings for your installation needs. • Galvanized fittings must be used with installation on galvanized pipe. •

ملخص المحتوى في الصفحة رقم 3

Undersink Installation (3/8-inch cold water line) 1 Materials Required: ® Teflon tape Plastic tubing (2) 3/8-inch compression fittings (2) 3/8-inch compression elbows (with ferrules and tubing inserts) (2) 3/8-inch to 3/4-inch NPT reducing adapters (for installation of 3/4-inch I/Os / filters) NOTE: • Reducing adapters can be used to adapt the filter to different pipe sizes. See your local 2 hardware store or plumbing store for help in selecting the necessary adapters and com- pression fittings

ملخص المحتوى في الصفحة رقم 4

Troubleshooting On unit inlet/outlet connections: Leaks…Between cap and bottom of housing: 1. Turn off water supply. Tighten compression fittings with a wrench. 1. Turn off water supply and press the red pressure-relief button. DO NOT OVERTIGHTEN. 2. Clean and lubricate o-ring if necessary, then screw bottom of housing 2. Turn on water supply. If leaks persist, or if there are other leaks on unit, turn off onto cap and hand-tighten. DO NOT OVER-TIGHTEN. water supply. Call Pentek Technical Suppo