ملخص المحتوى في الصفحة رقم 1
HONEYWELL
REMOTE RAIN GAUGE
For Professional Weather Station TE923W
TS906
USER MANUAL
ملخص المحتوى في الصفحة رقم 2
Table of Contents Introduction 3 Standard Package Contents 3 Installation 3 Before you begin 3 Operation 6 Maintenance 7 Troubleshooting 8 PRECAUTIONS 8 Specifications 8 FCC STATEMENT 9 DECLARATION OF CONFORMITY 9 STANDARD WARRANTY INFORMATION 10 2
ملخص المحتوى في الصفحة رقم 3
Introduction Thank you for selecting the Honeywell remote rain gauge TS906.This product is a part of the Professional Weather Station TE923W. It measures rainfall amount and transmits data to a TE923WD (main display unit). Note: In order to display the rainfall amount and related items, you must own a main display unit (TE923WD) for the Professional Weather Station TE923W. In this package you will find: One Rain Gauge (remote rain sensor/transmitter) (TS906) Mounting Hardware One
ملخص المحتوى في الصفحة رقم 4
• After reception is established (the rain readings will appear on the main unit’s display), position the remote rain gauge and the main unit within the effective transmission range of 100 feet (30 meters). Ideally it should be placed within the line of sight of the main unit. • Transmission range may be affected by trees, metal structures and electronic appliances. • The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit)
ملخص المحتوى في الصفحة رقم 5
G D E H H F I D. Funnel-shaped top with battery compartment Contains battery compartment and rainfall counting electronics E. Battery compartment Holds two AA-size batteries F. Screws Secure battery compartment cover G. Built-in leveler Allows leveling rain gauge on the surface H. Bucket see-saw mechanism Collects the rainfall in one of its containers and self-empties once full I. Protective screen Protects the rain gauge funnel from debris Battery installation • Unlock
ملخص المحتوى في الصفحة رقم 6
right the way. Mounting • Make sure that the rain gauge bucket is level – check if the ball bearing inside the bucket is at the midpoint of the leveler. • Place the protective screen over the top to protect the rain gauge from the debris. • Mount the rain gauge in place using mounting hardware provided. • Make sure that the rain gauge is in open area where precipitation falls directly into the gauge’s bucket, ideally 2-3 feet above the ground. Placement tips • The rain gauge shoul
ملخص المحتوى في الصفحة رقم 7
Tip: For the rain rate estimate the Last Hour rainfall value is understood as “inch/hr” or “mm/hr”. Resetting the Rainfall Statistics Memory In the Rain Mode, press and hold MEMORY to reset all rainfall statistics. Setting Units for the Rain Display in inches or mm In the Rain Mode, press and hold SET button to toggle rainfall data units between mm and inches. Enabling or Disabling the Daily Rainfall Alert • In the Rain Mode press the ALARM/CHART to display either the current rainfa
ملخص المحتوى في الصفحة رقم 8
• Clean small holes and parts with Q-tips or pipe-cleaner. • Watch out for spiders or insects that might have crawled into the funnel. • Clean the swinging mechanism with a damp cloth. Troubleshooting Q: The display shows dashes “---” for rain. A: The display will show “- - -” when the wireless connection with the rain gauge is lost for 30 minutes. Check or replace the batteries in the rain gauge. Then press and hold DOWN on the main unit or handheld remote to enforce a search for
ملخص المحتوى في الصفحة رقم 9
1h/24h/yesterday range: 0 to 78.73 inch (0 to 1999.9 mm) Last week/ last month range: 0 to 787.3 inch (0 to 19999 mm) Resolution: 0.03 inch (0.6578 mm) Accuracy: +/- 5% +/- 0.03 inch (+/-5%mm +/-0.6875) Transmitting Interval: 183 seconds Power: 2 x UM-3 or AA 1.5V battery Battery life (alkaline): 2 years Weight (without batteries):10.24oz (290g) Dimensions: 6.49(L) x 6.89(H) x 4.72(D) inches / 165(L) x 175(H) x 119(D) mm FCC STATEMENT This device complies with Part 15 of the F
ملخص المحتوى في الصفحة رقم 10
Product No.: TS906 Product Name: Remote Rain Gauge for Professional Weather Station TE923W Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
