La Crosse Technology SOLAR POWERED WIRELESS TEMPERATURE STATION TX62U-IT دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model WS-8120U-IT
Solar Powered Wireless Temperature Station


INSTRUCTION MANUAL

LCD display

Solar panels




Wall mount



Function

keys

%
Battery cover




Stands






Model TX62U-IT/Solar-powered Transmitter (Sensor):



 LCD shows temperature readings
 Transmits outdoor temperature to indoor receiver using 915 MHz
signals
 200 FT. wireless transmission range (open air)
 Built-in rechargeable alkaline power cells s

ملخص المحتوى في الصفحة رقم 2

INITIAL SETUP (USING INCLUDED SOLAR RECHARGEABLE BATTERIES FROM THE FACTORY) 1. Open battery compartment on the back of the Weather Station and make sure that the battery switch under the battery compartment is to the left. If it is not, please slide the switch to the left before proceeding. 2. Locate the battery insulator tab and gently pull to remove it. 3. Slide the battery switch to the SOLAR position. SWITCH RIGHT (SOLAR OPERATION) SWITCH LEFT (SOLAR-RECHARGEABLE (

ملخص المحتوى في الصفحة رقم 3

SOLAR-POWERED TRANSMITTER OPERATION MODES (1) NORMAL MODE:  NORMAL MODE occurs when the battery voltage is 2.5V or greater.  It measures and transmits temperature data to the indoor receiver every 8 seconds.  It checks the brightness level of the surrounding environment every 5 seconds.  It measures / transmits every 16 seconds if it detects a dark environment or if the battery voltage drops below 2.5V. (2) IDLE MODE:  If the battery voltage drops below 2.4V, it commences

ملخص المحتوى في الصفحة رقم 4

SET button PLUS button Solar panels % LCD display PROGRAM MENU: SET THE TIME: Press and hold the SET button for 3 seconds to enter the time setting mode.  HOUR: The Hour digits will flash. Press and release the PLUS button to set the Hour. Press and release the SET button once.  MINUTES: The Minute digits will flash. Press and release the PLUS button to set the Minutes. Press and release the SET button once. SET SOLAR MODE ON/OFF: Solar Mode is a

ملخص المحتوى في الصفحة رقم 5

DISPLAY MODES: Press and release the SET button to view different display modes:  Outdoor temperature in the first line on the left side and outdoor minimum in the second line on the left side  Shows indoor temperature in the first line on the right side and indoor humidity in the second line on the right  Indoor temperature in the first line on the left side and indoor humidity in the first line on the right side  Shows outdoor temperature in the second line on the left side an

ملخص المحتوى في الصفحة رقم 6

WALL MOUNTING 1. Install a mounting screw (not included) into a wall—leaving approximately 3/16 of an inch (5mm) extended from the wall. 2. Place the Weather Station onto the screw, using the hanging hole on the backside. Gently pull the Weather Station down to lock the screw into place. NOTE: Always ensure that the Weather Station locks onto the screw before releasing. POSITIONING THE SOLAR TRANSMITTER (SENSOR): It is important to place the Sensor in a bright environment

ملخص المحتوى في الصفحة رقم 7

Note: For best performance, standard alkaline batteries should be replaced at least once every 2 years to maintain the best running accuracy. Ensure that the batteries used are new and the correct size. Please help in the preservation of the environment and return used batteries to an authorized depot. RESTART AFTER STATION HAS BEEN RUNNIING: DISTANCE: For best results, please bring the outdoor sensor in the house and place 5-10 feet from the display unit. REMOVE POWER: Remove

ملخص المحتوى في الصفحة رقم 8

SPECIFICATIONS: Indoor Temperature Range: 15.8 F to 139.8 F Indoor Humidity Range: 20%-95% Outdoor Temperature Range: -39.2 F to 139.8F Transmission Range: 200 Feet (open air, no obstructions) Power Requirements: Solar Receiver Power: 2 “AA” rechargeable alkaline batteries included Can also use regular alkaline batteries Solar Sensor Power: built-in rechargeable power cell (no batteries to install) WARRANTY INFORMATION La Cr

ملخص المحتوى في الصفحة رقم 9

This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2817 Losey Blvd. S. La Crosse, WI 54601 www.lacrossetechnology.com/support The complete instruction manual is available at: www.lacrossetechnology.com/812