ملخص المحتوى في الصفحة رقم 1
User’s Manual
BATTERY MODULE
BP240V30ART3U
BP240V50ART3U
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Phone: 877-297-6937
Fax: 952-403-0009
www.CPSww.com
K01-0000210-00
ملخص المحتوى في الصفحة رقم 2
OVERVIEW The CyberPower Battery modules (BP240V30ART3U / BP240V50ART3U) support 30A/50A polarized plugs, and are designed for variety of CyberPower UPS systems. When combining with the UPS, the Battery module provides extended runtime with a 240VDC external connection. Additional parallel-connected Battery modules provide the UPS for a longer extended runtime operation. UNPACKING Rackmount ears (Stands) (2) * 1 set Battery module Tie plate (1) * 1 set
ملخص المحتوى في الصفحة رقم 3
HARDWARE INSTALLATION HARDWARE INSTALLATION Step 4: Adjust rackmount rails to fit your rack These versatile Battery modules can be mounted in a rackmount or Attach the rackmount rail to your rack with two M5X12L screws and two vertical /tower orientation. This versatility is especially important to plastic washers at the front of the rack. (Located in position 1 & position 6) growing organizations with changing needs that value having the option Do not tighten the screws. Adjust the ra
ملخص المحتوى في الصفحة رقم 4
HARDWARE INSTALLATION VERTICAL/TOWER INSTALLATION Step 1: Rotate the Multifunction LCD Module Step 2: Attach the base stands Unscrew the right panel of the power module. Separate the right panel Secure the tie bracket with the screws (M5X8*4pcs). Tighten the screws from the UPS. Gently lift the LCD module out. Rotate it to the tower (M5X12*4pcs) of the base stands (rackmount ears) onto the bottom of orientation. Reinstall it for a tower configuration. the power module and the Battery mo
ملخص المحتوى في الصفحة رقم 5
BASIC OPERATION BATTERY MODULE FRONT/REAR PANEL DESCRIPTION 1. On-board Replaceable Fuse Cover Replaceable fuse is accessible from the rear panel. It must be done by qualified personnel. 2. AC Circuit Breaker Provides overload and fault protection. 3. AC Output Outlet Use this outlet to connect to the AC Input Inlet of a downstream Battery module. 4. AC Input Inlet (Charge Only) AC power connectivity to wall receptacle. 5. Input Connector Use this input connector to daisy chai
ملخص المحتوى في الصفحة رقم 6
BASIC OPERATION CONNECTION #2 : POWER MODULE WITH MULTIPLE BATTERY MODULES st Step 1: Connect the 1 Battery module to the Power module using the instructions above. nd Step 2: Turn off the DC breaker of the 2 Battery module. Step 3: Loosen the two screws to remove the battery cable st retention bracket of the 1 battery module. nd Step 4: Use the output cable of the 2 Battery module to nd st connect the 2 Battery module to the 1 Battery module. Step 5: Rotate the battery cable re
ملخص المحتوى في الصفحة رقم 7
BASIC OPERATION EXTERNAL BATTERY MODULES CONFIGURATION External Battery Modules can be configured by the user to display correct estimated battery runtimes. 1. Press the “ENTER” button to activate the “MAIN MENU”. 2. Press the ▲ “ ▲▲ ▲ ” and ▼ “ ▼▼ ▼ ” buttons to scroll to the “Configure” option. 3. Press the “ENTER” button to select the “Configure” submenu. 4. Press the “ ▲ ▲ ” and “ ▼ ▼ ” buttons to scroll to the “EBP Number” option. ▲ ▲ ▼ ▼ 5. Press the “ENTER” button to select
ملخص المحتوى في الصفحة رقم 8
MAINTENANCE Storage CAUTION! Do not open or mutilate the batteries. Electrolyte fluid is harmful to the skin/eyes and may be toxic. To store your UPS for an extended period, cover it and store with the CAUTION! To avoid electric shock, turn off and unplug the Battery battery fully charged. Recharge the battery every three months to ensure module from the wall receptacle before servicing the battery. battery life. CAUTION! Only use tools with insulated handles. Do not lay tools o
ملخص المحتوى في الصفحة رقم 9
TECHNICAL SPECIFICATIONS Model BP240V30ART3U BP240V50ART3U Configuration AC Input Voltage 180~280Vac DC Output Voltage 240Vdc Amperage 30A 50A Physical Dimensions L x W x H = 26 x 17 x 5.2in. (660 x 433 x 132mm) Net Weight 167.2lbs(76Kg) 171.6lbs(78Kg) Battery Specifications (20) 12V/7.2AH (20) 12V/9.0AH Recharge Time (Typically) 4 hours 5 hours Interface PP45 Sealed, Maintenance Free Yes Hot-Swappable Yes Built-in Charger Yes Environment 32 ℉ to 104 ℉ ( 0 ℃ to 40 ℃
ملخص المحتوى في الصفحة رقم 10
PRODUCT REGISTRATION CyberPower requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website (www.cpsww.com) to establish that you are the Initial Customer of the Product, and therefore entitled coverage under the Limited Warranty and the Connected Equipment Guarantee. (Registration is not required for coverage, but note: if you do not register your purchase, you will be required to provide proof of purchase.)
ملخص المحتوى في الصفحة رقم 11
LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARNTEE Who Pays For Shipping? We pay when we send items to you; you pay when you send items to us. What Are Some Examples Of What This Warranty Does Not Cover? 1. This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software. 2. This Warranty does not cover or apply
ملخص المحتوى في الصفحة رقم 12
C CO ON NF FO OR RM MA AN NC CE E A AP PP PR RO OV VA AL LS FCC Notice T T Th h hiiis s s d d de e ev v viiic c ce e e c c co o om m mp p pllliiie e es s s w w wiiittth h h p p pa a ar r rttt 1 1 15 5 5 o o offf ttth h he e e F F FC C CC C C R R Ru u ullle e es s s... O O Op p pe e er r ra a atttiiio o on n n iiis s s s s su u ub b bjjje e ec c cttt ttto o o ttth h he e e fffo o ollllllo o ow w wiiin n ng g g tttw w wo o o c c co o on n nd d diiitttiiio o
