Grizzly H6440 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MODEL H6440/H6441
HALOGEN LAMP
INSTRUCTIONS
Specifications
power r equirements .................. g rounded 110V
t ransformer ................................................... 24V
1. Only connect this lamp to a properly
h alogen Bulb (h 6440) .............................70 Watt
grounded 110v power source.
h alogen Bulb (h 6441) .............................50 Watt
2. Halogen lamps can become very hot.
Securely mount this lamp to a stable
Inventory
surface that is safely away from com-
bust

ملخص المحتوى في الصفحة رقم 2

5. to remove the retaining cap and bulb assem- Replacing bulb bly from the reflective cone, push the cap 1. turn the lamp OFF, unplug it from the power down as you twist it counterclockwise. source, then allow it to cool. Note: Notice how the compression spring is 2. remove the six flat head screws from the mounted on the inside flanges of the retaining cover plate on the back of the lamp housing, cap. as shown in figure 2. 6. Slide the insulation sleeve surrounding the bulb assembly con