Cambridge Audio D-Series دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

-
D Series
Compact Disc Player
Owners' Manual

ملخص المحتوى في الصفحة رقم 2

Audio range, which has been designed to the same exacting standards INTRODUCTION as our CD players. Congratulations on purchasing this Cambridge Audio D Series Compact Disc Player. It has been designed using the results Interconnects and speaker cables are also something that shouldn’t be from an extensive Research & Development program undertaken overlooked. Please do not compromise your system’s performance by to identify the circuitry and components fundamental to our using poor quality cab

ملخص المحتوى في الصفحة رقم 3

SAFETY PRECAUTIONS CHECKING THE POWER SUPPLY SETTING PLUG FITTING INSTRUCTIONS (UK ONLY) For your own safety please read the following instructions carefully The cord supplied with this appliance is factory fitted with a 13A mains before attempting to connect this unit to the mains. plug fitted with a 3A fuse inside. If it is necessary to change the fuse, it • Check that the rear of your unit indicates the correct supply voltage. is important that a 3A one is used. If the plug needs to be chan

ملخص المحتوى في الصفحة رقم 4

This product is not user serviceable, never attempt to repair, disassemble INSTALLATION or reconstruct the unit if there seems to be a problem. A serious electric Please take a moment to read these notes before installing your D Series shock could result if this precautionary measure is ignored. In the event Compact Disc player, they will enable you to get the best performance and of a problem or failure, please contact your dealer. prolong the life of the product. This unit may be installed o

ملخص المحتوى في الصفحة رقم 5

FRONT PANEL CONTROLS LOADING AND UNLOADING DISCS Refer to the diagram on your accompanying Owner’s Manual 1. Press the POWER switch. 1. POWER 2. Press the OPEN/CLOSE button. The disc tray will open. If the disc tray is blocked while operating, the tray will stop and automatically after This control switches the mains power to the Compact Disc player ON approximately 8 seconds. and OFF. 3. When the disc tray has opened fully, place a disc carefully in the tray 2. OPEN/CLOSE with the label side

ملخص المحتوى في الصفحة رقم 6

NORMAL DISC PLAY LOCATING A PARTICULAR POINT IN A TRACK 1. Switch on your amplifier and set its input selector to the correct 1. Ensure that the disc is playing the desired track. position. Adjust the volume control to a minimum. 2. Turn the shuttle switch clockwise as far as it will go and hold it in this 2. Press the POWER switch. position. The track time will fast forward. 3. Press the OPEN/CLOSE button to open the disc tray, and load a disc. 3. Release the shuttle switch when the desired t

ملخص المحتوى في الصفحة رقم 7

PROGRAMMING DISC PLAY TROUBLESHOOTING GUIDE 1. Ensure that a disc is loaded and the player is in standby mode. THERE IS NO POWER 2. Press PROGRAM/REPEAT. The Program setup will appear in the Ensure that the AC power cord is connected securely. display Ensure that the plug is fully inserted into the wall socket and is switched on. 3. Using the shuttle switch or the remote handset skip to the track number that you want to program as your first track. Check fuse in the mains plug or adaptor. 4. Pr

ملخص المحتوى في الصفحة رقم 8

For the latest information on Cambridge Audio products visit us at www.cambridgeaudio.com Made from recyclable material Part No. AP10630/1