Maytag MGDB200V دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Gas Dryer
PRODUCT MODEL NUMBERS
MGDB200V, MGDB400V, MGDB700V,
MGDB800V, MGDB850W
Dryer with extended back: Dryer with flat back: Back view:
Bottom view:
Recommended Installation Spacing:
NOTE: Most installations require a
minimum of 5" (127 mm) clearance
behind dryer for exhaust vent with
elbow. See “Venting Requirements”.
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance
on sides and rear.
■ Additi

ملخص المحتوى في الصفحة رقم 2

INSTALLATION REQUIREMENTS GAS SUPPLY REQUIREMENTS Gas supply: This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed