Whirlpool GD8200Y دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Gas Dryer
PRODUCT MODEL NUMBERS
WGD8200Y, WGD8400Y,
WGD8600Y, WGD8800Y
Side view with open door dimensions: Back view: Bottom view:
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
Recommended Installation Spacing:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
■ Additional spacing sho

ملخص المحتوى في الصفحة رقم 2

INSTALLATION REQUIREMENTS GAS SUPPLY REQUIREMENTS Gas supply: This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed