Legacy Car Audio LCD69DSX دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

LEGACY
USA EUROPE
IMPORTANT:
This radio is set to USA frequency by factory, if European
INSTRUCTION MANUAL
frequency is required please flip the frequency step switch on
the side of the unit.
After the switchover of the frequency switch, the frequency convert
function will not be valid until the RESET button has been pressed.
REMOTE CONTROL BASICS BATTERY REPLACEMENT:
1.Remove the battery holde

ملخص المحتوى في الصفحة رقم 2

INSTALLATION DEAR CUSTOMER Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers. , We want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing. Sound can be dece

ملخص المحتوى في الصفحة رقم 3

TROUBLE SHOOTING DISC PLAY: Before going through the check list, wiring connection, should any of the problem persist after check list has been made, consult your nearest service Cleaning discs dealer. Before playing, clean the disc with a clean, lint-free. Flip the disc in the direction of the arrow. Symptom Cause Solution The car ignition is not on. If the power supply is properly connected to the car accessory No power switch the ignition key to " ACC " The fuse is blown Replace the

ملخص المحتوى في الصفحة رقم 4

SPECIFICATION LOCATION AND FUNCTION OF CONTROL GENERAL Power requirement..............................................................................................DC 13.8V. Current consumption..............................................................................................7A MAX. POWER OUTPUT.....................................................................................................4 X 40W. FM SECTION Frequency range......................................................

ملخص المحتوى في الصفحة رقم 5

3. SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTON Press SEL button to change the mode in the sequence of VOL BAS TRE BAL FAD Speaker Connection a. The volume level can be adjusted at any time by pressing the audio level+ or ANTENNA PLUG - button as select mode has been initially defaulted at volume mode. b. The volume level is also obtained by stepping through the SEL button until 12 P the function VOL is displayed and then press + or - button

ملخص المحتوى في الصفحة رقم 6

9. RELEASE BUTTON 17. PRESET STATION [ 1-6 ] / 2RPT, 3INT, 4RDM. Press it to flip down the front panel when you want to take away. A]. To memorize the current frequency, press and any one of the six preset buttons for more than 2 seconds. 10. LOUDNESS BUTTON B]. To recall the preset memory, press one of the preset button [1-6]. Press it to enhance the bass effect. C]. REPEAT BUTTON 11. CLOCK ADJUSTMENT BUTTON During CD mode. Press 2 RPT button to