Vinotemp WM-1500 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

VINO1500CD, CTED
VINO2500CD, CTED
Installation Instruction

1. Location

• Place the wine cellar in a properly ventilated location. Otherwise, heat
exhausted by the cooling unit will build up and it will not operate properly.
• The exhaust area must not be closed space and must be ventilated.

1) Rear Exhaust
• Leave min 6 “clearance from the rear to the wall.
• Leave min 12” clearance from the top to the ceiling.
• Leave min 6” clearance from the left and right sides.

2) Front

ملخص المحتوى في الصفحة رقم 2

Fig. 2.2 TOP EXHAUST GASKET • Cut a rectangular opening with the ¼” clearance at the rear of wine cabinet to the width and height of the cooling unit. • If top exhaust, cut a rectangular opening at the top of the cabinet to the length and width of the top exhaust openings. • Mount the gaskets on the four mounting sides. • If top exhaust, place the gaskets along the top openings at the top of the cooling unit. • Place the cooling unit to a flat and stable place. • Then move it on