ملخص المحتوى في الصفحة رقم 1
XL_brother_cover_Eng
KNOWING YOUR
SEWING MACHINE
1
STRAIGHT AND
ZIGZAG STITCHING
2
3 BUILT-IN STITCHES
SEWING BUTTONHOLES
AND BUTTONS
4
USING ATTACHMENTS
AND APPLICATIONS
5
APPENDIX
6
Operation Manual
ENGLISH
XXX-XXX
XXXXXX-XXX
Printed in China
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: 1. The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning. 2. Always unplug the machine before you change the light bulb. Replace the bulb with same type rated 15 watts. WARNING - To
ملخص المحتوى في الصفحة رقم 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug. NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is hazardous if engage
ملخص المحتوى في الصفحة رقم 4
UNPACKING/REPACKING INSTRUCTIONS Keep the carton and packing materials. You may have to take or send the machine to be repaired. If you do not pack it properly, or do not use the right packing material, the machine could be damaged. Please follow the diagram below to unpack and repack the machine. IMPORTANT ● This packing material is designed to prevent damage. Save this packing material if you need to take or send this machine to be repaired. PLEASE READ THESE INSTRUCTIONS BEFORE YOU USE TH
ملخص المحتوى في الصفحة رقم 5
CONTENTS 1. KNOWING YOUR SEWING MACHINE ..........................................................5 THE MAIN PARTS ...............................................................................................................5 ACCESSORIES .....................................................................................................................6 Optional Accessories .......................................................................................................................
ملخص المحتوى في الصفحة رقم 6
—————————————————————————————————————————————————————————— 5. USING ATTACHMENTS AND APPLICATIONS .............................................37 Zipper Insertion ............................................................................................................................................... 37 Gathering ........................................................................................................................................................ 38 Darning ...............
ملخص المحتوى في الصفحة رقم 7
1 KNOWING YOUR SEWING MACHINE THE MAIN PARTS 1 1 Bobbin winder (Page 16) D Pattern selection dial (Page 11) This winds the thread onto the bobbin for use as the You can turn this in either direction to choose the stitch lower thread. you want. 2 Spool pin (Page 16, 21) E Stitch length dial (Page 14) This controls the stitch length. This holds the spool of thread. F Buttonhole fine-adjustment screw (Page 36) 3 Thread guide (Page 16, 21) This is used when winding the thread onto the bobbin G Han
ملخص المحتوى في الصفحة رقم 8
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— ACCESSORIES The following accessories are stored in the flat bed attachment. We have designed these accessories to help you easily perform most sewing tasks. 1. 2. 3. 4. 5. 6. 7. 8. 9. Part Code Part Code No. Part Name No. Part Name USA Others USA Others 1 Zipper foot (1 pc.) X59370-021 5 Buttonhole Foot (1 pc.) XD1792-031 6 Button Sewing Foot (1 pc.) X59375-121 SFB: 2 Bobbin (3 pcs.) SA156 XA5539-151 7 Extra Spool Pin (1 pc
ملخص المحتوى في الصفحة رقم 9
USING YOUR SEWING MACHINE WARNING 1 ● Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine. ● Turn off the main power and remove the plug in the following circumstances: When you are away from the machine After using the machine When the power fails during use When the machine does not operate correctly due to a bad connection or a disconnection During electrical storms CAUTION ● Do not use
ملخص المحتوى في الصفحة رقم 10
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— Main Power and Sewing Checking the Needle Light Switch The sewing needle must always be straight and sharp for smooth sewing. This switch turns the main power and sewing light on or off. ■ Checking the Needle Correctly 1 Put the flat side of the needle on a flat surface. 2 Check the needle from the top and the sides. Dispose of any bent needles safely. 1 Turn on (toward the ‘I’ mark) 1 2 Turn off (toward the ‘O’ mark) 2 Fo
ملخص المحتوى في الصفحة رقم 11
Hold the needle with your left hand, and then 4 use a coin or screwdriver to turn the needle CAUTION clamp screw counterclockwise to remove the needle. ● Make sure you insert the needle until it touches the stopper, and securely tighten 1 the needle clamp screw with a coin or screwdriver. If the needle is not fully inserted, or if the needle clamp screw is loose, the needle may break or the machine may be damaged. 1 Use a coin or screwdriver 2 Needle clamp screw Do not use excessive f
ملخص المحتوى في الصفحة رقم 12
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— Put a different presser foot on the needle plate 3 so that the bar on the presser foot is in line Flat Bed Attachment with the slot on the shank. The accessories are stored in a compartment inside the flat bed attachment. Lower the presser foot lever and fix the 4 presser foot onto the shank. If the presser foot Slide the flat bed attachment to the left to is in the correct place, the bar should snap in. 1 open it. 1 1
ملخص المحتوى في الصفحة رقم 13
THE CONTROLS To choose a stitch, simply turn the pattern selection Pattern Selection Dial 1 dial in either direction. The next section shows recommended stitch lengths and widths. CAUTION ● When you use the pattern selection dial to choose a pattern, turn the handwheel toward 2 you (counterclockwise) to set the needle in the highest position. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged. 1 1 Pattern se
ملخص المحتوى في الصفحة رقم 14
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— Patterns and Stitch Names Recommended Recommended Pattern Instruction Stitch Name Width Length Manual Page 35 Stitches 25 Stitches (mm (inch)) (mm (inch)) 1-STEP AUTOMATIC 3-5 F- 1.5 34 BUTTONHOLE (1/8 – 3/16) (1/64-1/16) 0-5 (0-3/16) 1-4 27, 37, 38, 41, STRAIGHT STITCH (Changes needle (1/16-3/16) 42, 43 position) 0-5 F-4 ZIGZAG STITCH 28, 36, 39, 41 (0-3/16) (1/64-3/16) 3-5 F-2 BLIND HEM STITCH 29 (1/8-3/16) (1/64-1/16) 3-
ملخص المحتوى في الصفحة رقم 15
Recommended Recommended Pattern Instruction Stitch Name Width Length Manual Page 35 Stitches 25 Stitches (mm (inch)) (mm (inch)) Fixed 2.5 (3/32) 1 ELASTIC OVERLOCK 3-5 31 STITCH (1/8-3/16) Fixed 2.5 (3/32) Fixed 2.5 (3/32) 3-5 FEATHER STITCH 32 (1/8-3/16) Fixed 2.5 (3/32) Fixed 2.5 (3/32) 3-5 ARROWHEAD STITCH 31 (1/8-3/16) Fixed 2.5 (3/32) Fixed 2.5 (3/32) 3-5 ARROWHEAD STITCH 31 (1/8-3/16) Fixed 2.5 (3/32) Fixed 2.5 (3/32) 3-5 DECORATIVE STITCH 33 (1/8-3/16) Fixed 2.5 (3/32) Fixed
ملخص المحتوى في الصفحة رقم 16
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— Recommended Recommended Pattern Instruction Stitch Name Width Length Manual Page 35 Stitches 25 Stitches (mm (inch)) (mm (inch)) 3-5 Fixed COMB STITCH 31 (1/8-3/16) 2.5 (3/32) 3-5 Fixed COMB STITCH 31 (1/8-3/16) 2.5 (3/32) 3-5 Fixed DECORATIVE STITCH 33 (1/8-3/16) 2.5 (3/32) 3-5 Fixed FAGOTING STITCH 31 (1/8-13/64) 2.5 (3/32) 3-5 Fixed DECORATIVE STITCH 31 (1/8-3/16) 2.5 (3/32) 3-5 Fixed DECORATIVE HEM STITCH 33 (1/8-3/
ملخص المحتوى في الصفحة رقم 17
Stretch Stitching Stitch Width Dial Raise the needle to its highest position by turning the Raise the needle to its highest position by turning the handwheel toward you (counterclockwise) so that handwheel toward you (counterclockwise) so that the mark on the handwheel points directly up. the mark on the handwheel points directly up. 1 The numbers marked on the dial represent the stitch ■ 35 Stitches width. Selecting a Stretch Stitch THE HIGHER THE NUMBER, THE WIDER THE Setting the stitch l
ملخص المحتوى في الصفحة رقم 18
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— THREADING THE MACHINE Winding the Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB (XA5539-151)) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: S
ملخص المحتوى في الصفحة رقم 19
Put the bobbin onto the bobbin winder shaft Press the foot controller to start. 3 6 and slide the bobbin winder shaft to the right. Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the groove of the bobbin. 1 2 When the bobbin seems full and begins 1 7 spinning slowly, take your foot off the foot 1 Spring on the shaft controller. 2 Groove of the bobbin Cut the thread, slide the bobbin winder shaft 8 to the left and remove the bobbin. Note ● Make sure that the t
ملخص المحتوى في الصفحة رقم 20
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————— Raise the needle to its highest position by 1 turning the handwheel toward you Lower Threading (counterclockwise) and raise the presser foot For more details on using the quick-set bobbin, see lever. page 19. Slide the button and open the cover. 2 CAUTION 12 ● Not winding the bobbin properly may cause the thread tension to loosen, and may break the needle. 1 Cover 2 Slide button Put the bobbin in so the thread comes ou
