Graco Inc. 238080 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTRUCTIONS-PARTS LIST 308603
Rev. G
Texture Flexhead and Pole Spray Guns
100 psi (7 bar) Maximum Air and Fluid Working Pressure
Model 238080, Series B
Texture Flexhead Spray Gun
Model 238807, Series B
Pole Spray Gun
WARNING
Pressure Relief Procedure Working Pressure
To reduce the risk of serious bodily injury, including To reduce the risk of component rupture and serious
electric shock and splashing fluid in the eyes, follow this bodily injury, never exceed 100 psi (7 bar) AIR OR
procedure whe

ملخص المحتوى في الصفحة رقم 2

When spraying small, confined areas, use the valve Air flow valve adjustment and knob to make fine adjustments without adjusting the pump. To decrease air flow turn the valve (5) clockwise. Material flow adjustments (Fig. 1) To increase air flow, turn the valve (5) counter clock- For a lighter spray pattern, adjust the air needle (18) wise. closer to the fluid tip and/or reduce the fluid pressure. Check and thin the material as needed to maintain the For a heavier spray pattern, adjust the air