ملخص المحتوى في الصفحة رقم 1
Instruction Manual
ECO CART L16V/L20V/L30H
16/20/30 Bay Laptop Storage & Recharging Trolley
With Power Management
1 V2 04/12
ملخص المحتوى في الصفحة رقم 2
User Instruction for model ECO CART L16V/L20V/L30H Before proceeding check the contents and familiarise yourself with the internal layout of the cart. Contents:- 2 sets x front and rear door keys (located on top of cart). 4 x castors, 16 x bolts, 16 x washers located beneath the middle shelf inside the laptop storage area. (Applicable to 16V and 20V models only) IEC adaptor leads - Quantity 16/20/30 x IEC to figure eight and clover leaf connectors located inside the laptop stora
ملخص المحتوى في الصفحة رقم 3
ECO CART L20V Power Pack Shelf Timer Module IEC Power Strips ECO CART L30H Timer Modules Power Pack Shelf IEC Power Strips 3
ملخص المحتوى في الصفحة رقم 4
TM The EcoCart charging trolley from Bretford is specifically designed for the storage and recharging of up TM to laptops. To assemble/configure your new EcoCart charging trolley, simply follow the steps below... DO NOT CONNECT TO THE MAINS SUPPLY UNTIL STEPS 1-3 ARE COMPLETE Step 1: Fitting the Castors – ECO CART L16V and L20V versions only (ECO CART L30H model come with the castors already fitted) PLEASE NOTE: Bretford adv
ملخص المحتوى في الصفحة رقم 5
← ECO CART L16V & L20V Models Starting with the top power pack shelf and the corresponding top IEC power strips connect the IEC connectors into the IEC power strips. Then feed the power pack connecting lead up through the cut outs into the power pack compartments. Move to the lower power pack shelf & repeat as above. Connect the remaining IEC connectors into the IEC power strips & feeding the connecting leads into the power pack shelves above. ECO CART L16V & L20V ← ECO CART
ملخص المحتوى في الصفحة رقم 6
Step 3: Inserting and connecting the laptops TM Move to the front of the EcoCart and open the door to reveal the 16/20/30 laptop storage compartments. ← ECO CART L16V & L20V Models Select one of the laptop connecting leads previously fed through from the rear of the cart and feed it through the 2 corresponding cable management holes at the top of each shelf compartment. Repeat this action until all 16/20 laptop connecting leads are in place. ECO CART L16V & L20V
ملخص المحتوى في الصفحة رقم 7
TM Step 4: Connecting the EcoCart to the mains Feed the IEC connector end of the supplied 2m mains lead through the hole in the side of the trolley. ← ECO CART L16V & L20V Models Plug the mains lead into the IEC socket on the side of the power module. ECO CART L30H Model → Plug the mains lead into the IEC socket located at the ECO CART L16V & L20V bottom of the centre pillar on the right hand side. ECO CART L30H Plug the trolley’s mains lead in to a switched wall socket and
ملخص المحتوى في الصفحة رقم 8
Energy Saving 24 Hour Timer TM All EcoCart models are fitted with an energy saving programmable 24 hour timer (ECO CART L30H models feature 2 individual timer units). Each timer features 2 timer options allowing you to set your unit to automatically start charging over 2 separate time periods in one 24 hour period. This could be from 6:30am to 8:30am ready for morning classes and then again at 12pm to 1pm ready for afternoon classes. The timer can also be set be set to charge your lapto
ملخص المحتوى في الصفحة رقم 9
Step 6: Setting the Energy Saving 24 Hour Timer To set Timer 1 turn the knob to light the LED “Timer 1: ON Time”& push to select (indicator flashes). Turn the control knob until the desired charging START time is reached, then press again to set (stops flashing). Then turn the knob to light the LED “Timer 1: OFF Time”& push to select (indicator flashes). Turn the control knob until the desired charging FINISH time is reached, then press again to set (stops flashing). Repeat
ملخص المحتوى في الصفحة رقم 10
LED Light Display Guide Fig: 1 Fig: 2 This light combination Charging in progress indicates that NO charging is taking place. This light combination To start charging first indicates that the unit is check the unit is in constant charging switched on then either mode. press the knob for constant charging or set Timer 1 or Timer 2. Fig: 3 Fig: 4 Charging in progress This light combination indicates that e
ملخص المحتوى في الصفحة رقم 11
Frequently Asked Questions Q. I have followed the configuration guidelines yet my laptops do not appear to be charging? A. Is the unit in Timed Charging mode? Open the rear door of the cart to view the power module. View the LED display. (Refer to LED light Display guide on page 10. If fig.3 is displayed then a timed, charging period has been selected but the start time has not yet been reached. To start charging either reset Timer 1 or 2 to the required times or set both timers O
ملخص المحتوى في الصفحة رقم 12
Safety and Security Guidance This unit is designed for storage and re-charging of laptops only To avoid damage, please ensure that the laptops are inserted & removed by an adult or competent person All vents MUST be kept clear at all times, including allowing enough space between the back of the cabinet and the wall to ensure good air flow (50mm Minimum) This unit should be used with a switched wall socket ONLY IMPORTANT - Ensure the wall socket switch is in the ‘off’ positio
