Cadet CT408 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

The Com-Pak Plus Manual Reset
replacement instructions
MODELS
The Com-Pak Plus The Com-Pak Twin Plus
C202, C152, C122, C102, C072, CT402, CT302, CT408,
C151, C101, C051, C208
Note:
Now is the perfect opportunity to clean your heater. See
original product Owner’s Guide or go to www.cadetco.com
and find detailed cleaning instructions under Other Links for
the Com-Pak Plus.
• • • •
TOOLS REQUIRED: Small Flathead Screwdriver Phillips Screwdriver Wire Cutter Cable or Wire Ties
• • • •
Wire Connectors

ملخص المحتوى في الصفحة رقم 2

Installation Instructions 1. Remove knob (if applicable) and screws to remove grill. 13. Tighten securing screw on bottom of face by thermostat or hole location. 2. Remove grill. 14. Wiring 3. Remove heatbox from wall can by loosening screw at top. A. Connect new Reset wires to lead wires previously cut, using 4. Unwiring wire connectors. A. Remove insulated wire connectors that connect heatbox B. Fasten wiring with wire ties so all wires fit neatly to the side of to wall can. the motor and are