ملخص المحتوى في الصفحة رقم 1
Compact Ceramic
Oscillating Heater
1800W oscillating heater with ceramic element
Instruction Booklet
HE2100
Please read these instructions carefully and
retain for future reference.
ملخص المحتوى في الصفحة رقم 2
Contents Sunbeam’s Safety Precautions 1 Sunbeam’s Safety Precautions for your Heater 2 Sunbeam’s Total Safety System 3 Features of your Compact Oscillating Ceramic Heater 4 Using your Compact Oscillating Ceramic Heater 6 Using the Oscillation function 7 Resetting the Total Safety System 7 Troubleshooting Guide 8 Care and Cleaning 8
ملخص المحتوى في الصفحة رقم 3
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when • Never leave an appliance unattended while designing and manufacturing consumer products, in use. but it is essential that the product user also • Do not use an appliance for any purpose exercise care when using an electrical appliance. other than its intended use. Listed below are precautions which are essential • Do not place an appliance on or near a hot gas for the safe use of an electrical appliance: flame, electr
ملخص المحتوى في الصفحة رقم 4
Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid • Do not locate the heater immediately below a burns, do not let bare skin touch hot surfaces. socket outlet. If provided, use handles when moving this • Do not use this heater in the immediate heater. Keep combustible materials such as surrounds of a bath, shower, laundry area or furniture, pillows, bedding, papers, clothes and swimming pool. curtains at least 3 feet (90cm) away from the • Do not insert or allow
ملخص المحتوى في الصفحة رقم 5
Sunbeam’s Total Safety System Safety auto shut off Thermal back-up device Your Sunbeam Compact Oscillating Ceramic In addition to this automatic shut-off, your heater is equipped with a safety system that heater contains an over temperature thermal detects any abnormally high temperatures back-up device to provide additional back- within the heater and automatically shuts it up protection. If the heater is in an overheat off to prevent overheating. If the heater is situation, the back-up devi
ملخص المحتوى في الصفحة رقم 6
���� ��� ���� ���� Features of your Compact Oscillating Ceramic Heater Mode button Press the mode button to select the desired operating mode: LOW HEAT, HIGH HEAT AUTO, FAN or STANDBY Fan setting Ideal for circulating cool air in summer, the fan setting operates the fan without heat. Power ON light Illuminates to indicate that the heater is connected to the power outlet. LCD screen The LCD screen displays the current settings including the ambient room temperature, the selected mode, or
ملخص المحتوى في الصفحة رقم 7
���� ��� ���� ���� Oscillation function The heater oscillates 90 degrees to provide greater heat distribution. Simply press the oscillation button (OSC) to activate this function. Electronic thermostat The electronic thermostat allows for precise temperature control. Select the auto mode to set the electronic thermostat and turn the thermostat dial to the desired heat setting. Once your desired temperature is reached, the heater will cycle on and off to maintain it. Thermostat dial When
ملخص المحتوى في الصفحة رقم 8
Using your Compact Oscillating Ceramic Heater 1. Place the heater on a flat level surface and Setting the electronic thermostat ensure that the air intake and outlet are The electronic thermostat allows you to set clear of obstructions. the precise temperature. Once the desired temperature level is reached the heater will 2. Insert the plug into a 230/240V power cycle on and off to maintain it. outlet and turn the power on. 1. Press the mode button until the AUTO 3.The power on light an
ملخص المحتوى في الصفحة رقم 9
Using the Oscillation Function The 90 degree oscillation function can be 2. To stop the heater from oscillating, simply used in any mode except standby. press the oscillation button (OSC) once again. 1. Press the oscillation button (OSC), positioned on the top of the heater. The heater will then begin to oscillate from side to side. Resetting the Total Safety System Resetting the safety auto shut-off Resetting the thermal backup device The safety auto shut-off detects any In addition to the
ملخص المحتوى في الصفحة رقم 10
Troubleshooting Guide If your heater fails to operate check the • Check that the thermostat is not set too following: low. Turn the thermostat dial clockwise to adjust the electronic thermostat until the • Make sure the electrical outlet or circuit heater restarts. breaker is working. • The safety auto shut-off may have • Check for obstructions. If you find an activated, so follow the instructions for obstruction, turn the heater off and follow resetting on page 7. the reset instruction
ملخص المحتوى في الصفحة رقم 11
‘Sunbeam’, is a registered trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam’s 2 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2006. ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. For more information or advice on this or any other Sunbeam appliance, visit www.sunbeam.com.au or contact th
ملخص المحتوى في الصفحة رقم 12
Consumer Information Australia 1800 025 059 New Zealand 0800 786 232 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ABN 45 000 006 771. © Sunbeam Corporation Limited 2006.
