ملخص المحتوى في الصفحة رقم 1
AUDIOVOX
CDM-9000
Tri-Mode CDMA/AMPS
Handheld Portable
Cellular Telephone
In today’s fast paced world, it has become a necessity to have access to real-time information. Your communications tools
must provide you with this access from anywhere and anytime. With that in mind, Audiovox developed the CDM-9000,
our first Tri-Mode Web Browsing wireless telephone.
The CDM-9000 features 800 MHz Amps/CDMA and 1900 MHz CDMA Tri-mode operation for enhanced nationwide
service coverage. The digital phone fe
ملخص المحتوى في الصفحة رقم 2
WRIST STRAP ATTACHMENT Attach the wrist strap to the phone through the strap hole as shown below 1. Then pull the long loop through the smaller loop as shown below 2. BATTERY INSTALLATION AND RECHARGING To Attach the Battery Pack 1. Insert the hook at the end of the Battery Pack into the slot at the end of the phone. 2. Press the Battery Pack down to lock the Battery Pack onto the phone. To Detach the Battery Pack 1. Slide back the Release Latch as shown below. 2. Lift up to remove the Battery
ملخص المحتوى في الصفحة رقم 3
TO RECHARGE BA TTERY Your CDM-9000 has a built in charger function. To re-charge the Battery Pack, always install the Battery Pack to the phone. 1. Attach the Battery pack to the Phone 2. Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000). Plug the AC Adapter to AC outlet. 3. Place the Phone with Battery Pack into the Desktop Holder. 4. Then the recharging starts. The display indicates “Now Charging” with animation. You can see a battery level indicator scrolling at
ملخص المحتوى في الصفحة رقم 4
FUNCTIONS External View
ملخص المحتوى في الصفحة رقم 5
BASIC OPERATION Placing Calls To place a call: 1. Enter the phone number.( a maximum of 32 digits will be displayed.) 2. Press . The indicator will light. · To Correct a Number Press to clear the last digit. Press and hold to erase all the digits entered. · If the Call Fails to Go Through Press , and to redial the number. GETTING ST ARTED Turning the phone On/Off Press and hold . All the indicators and the digit display will light momentarily, and a tone will be heard. The indicator wil
ملخص المحتوى في الصفحة رقم 6
+ Power Management Talk Time Standby Battery Mode (up to) Time (up to) Slim Battery D. igital1h90min170 (BTR-4000) SlimBattery A. nalog6h5min12 (BTR-4000) Extended D. igital3h80min340 (BTE-4000) Extended A. nalog1h30min24 (BTE-4000) BASIC OPERATION Placing Calls To place a call: 1. Enter the phone number.( a maximum of 32 digits will be displayed.) 2. Press . The indicator will light. To Terminate a Call Press . The indicator will go out. Last Number Redial Press to recall the last numb
ملخص المحتوى في الصفحة رقم 7
See Phonebook Recall. To Mute A Phone Conversation Press to mute your conversation at any time during a call. “MUTE” will be displayed. To return to normal conversation, Press again. Speed Dialing If you know the phonebook address of the telephone number that you want to call, you may place a call without using . 1. Enter the one or two digits of your phonebook address (1~9 or 10~99). 2. Press . The phone number will be displayed. The indicator will light, and the call will be placed. NOTE:
ملخص المحتوى في الصفحة رقم 8
When you dial one of the 3 pre-programmed emergency numbers, your phone will enter the Emergency Call Mode. In this mode, the phone will attempt to complete the emergency call using any available cellular system from which it can obtain service. After it places an emergency call, the phone will stay in the Emergency Call Mode, and will display Emergency Call Mode, END to exit”. In the Emergency Call Mode, the phone will attempt to continue to receive service from the cellular system that it used
ملخص المحتوى في الصفحة رقم 9
Simply press the or to adjust Earpiece Volume during a call. Scratch Pad Dialing If you enter a telephone number during a call, the number will be stored in the Scratch Pad memory. After terminating the call, the number you entered can be dialed by . NOTE: You can deactivate “ Sending DTMF” so that keypad tones will not be transmitted to the calling party. See Sending DTMF (F35). Automatic Talk Timer The talk time of the current call will be automatically displayed. For example, “1h23m45s”.
ملخص المحتوى في الصفحة رقم 10
Tone™ signals. See Link dialing for more information. Touch Tone™ from Display When Sending DTMF mode is on, the number will be sent in Touch Tone™ signals during a call as you press digit keys. When Sending DTMF mode is off, you can send Touch Tone™ signals in the following manner. 1. Enter the number 2. Press and scroll to “Tone”. 3. Press . The number in the display will be sent in Touch Tone™ signals. Touch Tone™ from Memory Touch Tone™ signals can be sent from memory during a call
ملخص المحتوى في الصفحة رقم 11
To Store a Number without Name 1. Press , then enter the phone number. 2. Press , then enter the desired memory address (01 through 99). Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 in address 07. 1. Press . 2. Enter . 3. Press .. 4. Enter and press . Overwrite Warning When you attempt to store a number in an address where another number has already been stored, you will have “OVER- WRITE” warning. Example: To store the number 9 8 7 6 5 4 3 2 1 0 in the
ملخص المحتوى في الصفحة رقم 12
4. Enter . The number already stored is displayed momentarily. 5. Two seconds later. 6. If you accept to overwrite, scroll to “YES” and Press . 7. If you do not want to overwrite, scroll to “NO” and press . The screen returns to the step 3 again. Auto Hyphenation With this feature on, hyphens are automatically inserted when you enter telephone numbers and when you recall the numbers from the Phonebook. See Auto Hyphenation (F23) to activate or deactivate this feature. Length of Number
ملخص المحتوى في الصفحة رقم 13
available memory address which will be indicated in the display. This feature can prevent the possible overwriting of a previously stored number. 1. Enter the phone number. 2. Press . Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 into a vacant memory address 04. 1. Press . 2. Enter . 3. Press 4. Press . To Store Dual Numbers in Phonebook You can store Dual Numbers with Dual Mark “ \ ” up to 32 digits for all the addresses 01 to 99 in the phonebook. To store two tele
ملخص المحتوى في الصفحة رقم 14
5. Enter . 6. Press . 7. Enter and press . Note: You can add a second number after storing a first number. See To Enter a Second Number. To Store a Name with the Phone Number To use this procedure, you will need to refer to “Alpha Mode” below. 1. Enter the phone number. 2. Press to select the Alpha Mode. 3. Enter the name. 4. Press , then enter the memory address (01 through 99) to store the number with the name into memory. Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 w
ملخص المحتوى في الصفحة رقم 15
1. Press , than enter the phone number. 2. Press . 3. Press digit key repeatedly to display the letter that you want. The following table shows which character is assigned with each digit key. For example, to enter the letter “D”, press once. For the letter “F”, press three times. Assigned Alpha Characters Key 1 press 2 press 3 press 4 press 5 press 1dB1lan 2a ABC Ab/ Bc / C2/ 3d DEF De/ Ef / F3/ 4g GHI Gh / Hi/ I4 / 5j JKL Jk / Kl/ L5/ 6m MNOMn/ No / O6/ 7p PQRSPq / Qr/ Rs / S7/ 8t TUV T
ملخص المحتوى في الصفحة رقم 16
You can choose one of 15 ring types for each phonebook address. With this feature, you will be able to distinguish who is calling by hearing the ringing tone. The ring type is selected while storing the number when the word “OPTION” appears. Example: To store a number with Ring Type #02 in the address 12. 1. Enter the phone number, and press . 2. Press and scroll to “RING TYPE”. 3. Press and scroll to one of the numbers, which you want to set. 4. Press and scroll to sample the differ
ملخص المحتوى في الصفحة رقم 17
Notes: 1. The submenu “PRI.CHANGE” will be available only when two telephone numbers are stored in that address. 2. The submenu “REPLAY” will be available only when your voice is stored in that address. Phonebook Recall To recall the numbers stored in your phonebook, you have three methods: Address Mode, Sort Scroll Mode and Key Word Search Mode. Phonebook Address Mode This mode is useful in finding a phone number by recalling a specific address or by scrolling the Phonebook. 1. Press . 2. Ent
ملخص المحتوى في الصفحة رقم 18
4. Press . 5. Press . Note: When the Alpha Tag is 2 lines long, only the Alpha Tag is displayed without the telephone number. However, a call can still be made by simply pressing . Phonebook Key Word Search Mode This mode searches and displays the character string of Alpha Tags stored in the Phonebook. Any part of the Alpha Tag can be used for the search. Example: To search the character string AN stored in the Phonebook. 1. Press . 2. Press for “A”. 3. Press for “N”. 4. Press .
ملخص المحتوى في الصفحة رقم 19
· To dial the primary number, just press . · To dial the secondary number, press . To Review Long Numbers This feature allows you to review all the digits of very long numbers or numbers stored with Alpha Tags. 1. Use any of the previously described Phonebook search modes to recall a number. 2. Press and scroll to “VIEW TEL#”, and the entire digits of the number will be displayed. To Review Long Names This feature allows you to review whole Alpha Name Tag stored with dual numbers. 1. Use any of
ملخص المحتوى في الصفحة رقم 20
To Modify Alpha Name Tag Recall the number and proceed to “MODIFY” as above. Press , and the Name Tag will appear by itself. Press to clear the letter(s), and enter the new Name. To Modify Address After you modified number/name, just press without entering new address, and the current phonebook address will be overwritten. If you enter a new address, and press , the modified number/name will be combined to the new address, while the original address will remain unchanged. To Enter a Second
