ملخص المحتوى في الصفحة رقم 1
DO NOT
DISCARD
R
3100-I ACT WOOD INSERT
Advanced Combustion Technology (ACT)
OWNER’S MANUAL
Tested and Beaverton
Listed by Oregon USA
Installation and Operation C US
OMNI- Test Laboratories, Inc.
Model:
830-0381
CAUTION
DO NOT DISCARD THIS MANUAL
• Read, understand and
• Important operating • Leave this manual with
follow these instructions party responsible for
and maintenance
for safe installation and use and operation.
instructions included.
operation.
WARNING WARNING
HOT SURFACES!
If
ملخص المحتوى في الصفحة رقم 2
R 3100-I ACT WOOD INSERT and Welcome to the Quadra-Fire Family! Hearth & Home Technologies welcomes you to our tradition of we are old-fashioned when it comes to craftsmanship. Each unit excellence! In choosing a Quadra-Fire appliance, you have our is meticulously fabricated and surfaces are hand-finished for last- assurance of commitment to quality, durability, and performance. ing beauty and enjoyment. Our pledge to quality is completed as each model undergoes a quality control inspectio
ملخص المحتوى في الصفحة رقم 3
R 3100-I ACT WOOD INSERT TABLE OF CONTENTS MAINTENANCE SAFETY & OVERVIEW OF APPLIANCE Plated Surfaces ----------------------------------------------- 18 Serial Number /Listing Label Location ------------------ Glass Cleaning & Replacement --------------------------- 18 Dimensions ----------------------------------------------------- 4 Creosote Formation & Removal -------------------------- 18 Minimum Clearances to Combustibles ------------------ 5 Chimney -------------------------------------
ملخص المحتوى في الصفحة رقم 4
R 3100-I ACT WOOD INSERT INSERT DIMENSIONS 27-7/16" (697mm) 22-7/16" (570mm) TOP VIEW C L 14-1/8" 8-5/8" (359mm) (219mm) 5-3/8" (137mm) 12-3/16" (310mm) 38-7/8" (987mm) 23-1/8" (587mm) 21-1/2" (546mm) 20-3/8" SIDE VIEW (518mm) 7-7//8" (00mm) 26-1/4" (667mm) FRONT VIEW A Panel A B Size B STD 44-5/8” 30-1/2” Large 50-1/2” 34-1/2” Page 4 250-6381D September 1, 2008
ملخص المحتوى في الصفحة رقم 5
R 3100-I ACT WOOD INSERT CLEARANCES TO COMBUSTIBLES United States and Canada USA CANADA Maximum Mantel Depth - 10" (254mm) A Sidewall to Stove 16" 16" (406mm) B Mantel Clearances Mantel *No Mantel Shield 33" 34" (864mm) Fascia or Trim B with 5" Mantel Deflector 27" 24" (610mm) with 8" Mantel Deflector 17" 16"(406mm) with Mantel Shield Only 24" 18"(457mm) C 5" Deflector & Mantel Shield 23" 15"(381mm) A D Insert 8" Deflector & Mantel Shield 15" 15"(381mm) C Top Trim to Sto
ملخص المحتوى في الصفحة رقم 6
R 3100-I ACT WOOD INSERT LISTINGS CHIMNEY HEIGHT/DRAFT (CONT’D) These installation instructions describe the installation and AVOID FIRE: To ensure that insulation or any other combustible operation of the Quadra-Fire 3100-I ACT Wood Insert. This material does not contact the chimney, a chimney inside the house insert meets the U.S. Environmental Protection Agency’s 1990 must have at least 2 inches (51mm) of air space clearance around particulate emission standards. The 3100-I ACTis li
ملخص المحتوى في الصفحة رقم 7
R 3100-I ACT WOOD INSERT GENERAL INSTALLATION PROCEDURE • DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE. • Install liner, if required, for your chosen installation. • Attach metal warning plate to the back of the fireplace with screws or nails. • Set appliance on the hearth (See Hearth Requirements page 5 and Support Kit information on page 14. • Complete the vent connection required for your installation type. • Install optional blower, if purchased, (page 13), then the
ملخص المحتوى في الصفحة رقم 8
R 3100-I ACT WOOD INSERT OVALIZING ROUND STAINLESS STEEL CHIMNEY REqUIREMENTS LINERS A chimney must be the required height above the roof or other obstruction for safety and for proper draft oper- Ovalizing round stainless steel liners to acommodate the liner passing through the damper region of a fire- ation. The requirement is that the chimney must be at place is an allowable and acceptable practice. least 3 feet (91cm) higher than the highest point where it passes through the roof, a
ملخص المحتوى في الصفحة رقم 9
R 3100-I ACT WOOD INSERT INSTALLATION OPTIONS Refer to: Clearances to Combustibles on page 5, Canadian Installation requirements on page 11, Hearth Requirements on page 5 and Zero Clearance Adjustable Support Kit on page 14. MASONRY FIREPLACE Full Listed Masonry Chimney USING DIRECT-CONNECT METHOD Flue Tile The Quadra-Fire 3100-I ACT Insert conforms with the UL Liner Option Mantel Standard for Safety 1482 and ULC S628 (Canada) in all respects, and is approved to UL & ULC safety standard
ملخص المحتوى في الصفحة رقم 10
R 3100-I ACT WOOD INSERT FACTORY BUILT ZERO CLEARANCE FIREPLACE (USA INSTALLATIONS ONLY) The Quadra-Fire 3100-I ACT Wood Stove Insert is listed to UL 1482 Standard and approved for installation into listed factory built zero clearance fireplaces listed to UL 127 con- forming to the following specifications and instructions: Mantel The original factory-built clearance fireplace chimney cap must be re-installed after installing the approved chim- ney liner meeting type H.T. requirements (21
ملخص المحتوى في الصفحة رقم 11
Attach liner with tabs R 3100-I ACT WOOD INSERT INSTALLATION IN CANADA MASONRY and HEAT-CIRCULATING (INSTALLATIONS INTO FACTORY-BUILT FIREPLACES ARE PROHIBITED IN CANADA) Whether installed in a masonry or heat-circulating fireplace, this fireplace insert must be installed with a continuous chim- ney liner of 6” (152mm) diameter extending from the fireplace insert to the top of the chimney. The chimney liner must conform to the Class 3 requirements of CAN/ULC-S635, Standard for Lining Syst
ملخص المحتوى في الصفحة رقم 12
R 3100-I ACT WOOD INSERT INSTALLATION OF PANEL SET AND TRIM Part No. Description Size Part No. Description Size SP-31S-NL Std, Nickel 44-5/8” x 30-1/2” 831-0862 Large, Gold 50-1/2” x 34-1/2” SP-31L-NL Large, Nickel 50-1/2” x 34-1/2” Kit Includes: (2) Side Panels, left & right; (1) Panel Top & Fastener package; (2) Side Trim, left & right; (1) Trim Top & Fastener package. Tools Needed: Powered Phillips head screw driver. Attaching Panels to the Insert 1. Install the 2 side panels on the
ملخص المحتوى في الصفحة رقم 13
R 3100-I ACT WOOD INSERT FAN (BLOWER) INSTALLATION INSTRUCTIONS Part No. 831-1101 Black & White Wires Attach to Fan Motor Terminals Speed Control Power Cord Power cord can be attached to the right or left side. Strain Relief Location, Holding Together Power Cord and Fan Motor Wires Feed Fan Motor Screens Wires Through Holes (Fan Covers) FAN SPEED CONTROL ADJUSTMENT, IF Included in Kit: (2) Fan mounts & fan assemblies; (1) Speed Control, Power Cord/wire assembly; (1 set) Fan NECESSA
ملخص المحتوى في الصفحة رقم 14
R 3100-I ACT WOOD INSERT ZERO CLEARANCE ADJUSTABLE TRIM SUPPORT, 2” to 10” Part No. 841-0990, size 9” x 45” and Part No. ADJSPT-12, size 12” x 50” Included in Kit: (1) Trim Top, (1) Trim Front, (2) Trim Sides, Double-Sided Tape (already installed) Tools Needed: Phillips Head Screwdriver, Sheet Metal Shears, Measuring Tape, Gloves EXPLODED VIEW OF SCISSORS 1. The 10 screws on each set of scissors will already be loose when shipped. See Figure 14A. 2. Expand scissors to desired height. Ti
ملخص المحتوى في الصفحة رقم 15
R 3100-I ACT WOOD INSERT OPERATION WOOD SELECTION AND STORAGE Burn only dry seasoned wood. Dry, well-seasoned wood will not only minimize the chance of creosote formation but will give you the most efficient heat output. Even dry wood contains at least 15% moisture by weight and should be burned hot enough to keep the chimney hot enough to maintain particulate (smoke) burning. Burning unseasoned wood of any variety defeats the stoves’ efficiency. Dead wood lying on the forest floor should b
ملخص المحتوى في الصفحة رقم 16
R 3100-I ACT WOOD INSERT OPERATING TIPS For maximum operating efficiency with the lowest emissions, follow these operating procedures: 1. Regardless of desired heat output, when loading your insert, burn your Quadra-Fire with both air controls wide open for a minimum of 5 to 15 minutes. 2. Regulate burn rate (heat output) by using the Primary Control (located under the ashlip). The Start-Up Air Control (right side) is mainly for initial start-up and reloading. 3. Heat output settings: Follo
ملخص المحتوى في الصفحة رقم 17
R 3100-I ACT WOOD INSERT AIR qUALITY AND YOUR qUADRA-FIRE INSERT In recent years there has been an increasing concern about the quality of our air. Much of the blame for poor air quality has been placed on the burning of wood for home heating. In order to improve this situation we at Quadra-Fire have developed cleaner burning inserts that surpass the stringent requirements for emissions established by our governing agencies. Your 3100-I ACT, like any other appliance, must be properly op
ملخص المحتوى في الصفحة رقم 18
R 3100-I ACT WOOD INSERT MAINTENANCE CARE AND CLEANING OF PLATED SURFACES IMPORTANT: You must clean all the fingerprints and oils from the plated surfaces before firing the insert for the first time. Use warm soapy water and a soft rag, glass cleaner and a paper towel, or vinegar and a paper towel to remove the oils. DO NOT use abrasive cleaners! If not cleaned properly prior to lighting the first fire, the oils can cause permanent stains. The plating will be cured upon firing of the inse
ملخص المحتوى في الصفحة رقم 19
R 3100-I ACT WOOD INSERT BRICK REPLACEMENT INSTRUCTIONS The firebox of your Quadra-Fire 3100-I ACT Insert is lined with high quality firebrick which has exceptional insulating proper- ties. There is no need for a grate, simply build a fire on the firebox of your insert. 1. Remove all old brick and ash from unit. Figure 19A 2. Remove new brick set from box and lay out to diagram as shown in Figure 3 19A. 3 3. Lay bottom bricks in unit. 5 4. Install rear bricks on the top of the bottom bric
ملخص المحتوى في الصفحة رقم 20
R 3100-I ACT WOOD INSERT EXPLODED VIEW 10 9 11 8 4 7 2 3 6 5 1 Item Description Item Description 1 Trim Ring, Louver 7 Screen, Left/Right (interchange- able) Manifold Tubes, Back (3) 8 Speed Control 3 Manifold Tube, Front (1) 9 Baffle, Fiberboard 4 Spring Handle, 1/4” (2) 10 Blanket, Ceramic 5 Blower Assembly 11 Brick, Set 6 Louver Assembly Page 0 250-6381D September 1, 2008
