ملخص المحتوى في الصفحة رقم 1
Operator’s Manual
Manuel d’utilisation
Manual del Operario
Questions? Help is just a moment away!
09801-9
Vous avez des questions? Vous n'avez pas besoin d'aller
loin pour trouver de l'aide!
(10000W)
Preguntas? La ayuda es justa un momento lejos!
Call: Generator Helpline
Appelez: Ligne d'assistance de Générateur
Llame: Línea Directa del Generador
1-800-743-4115 M-F 8-5 CT
web: www.briggsandstratton.com
WARNING AVERTISSEMENT ADVERTENCIA
Before using this product, read this Avant d’utiliser ce
ملخص المحتوى في الصفحة رقم 2
SAFETY RULES SAVE THESE INSTRUCTIONS TABLE OF CONTENTS SAFETY RULES Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 This is the safety alert symbol. It is used to Know Your Generator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 alert you to potential personal injury hazards. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 Obey all safety messages that follow this Operation . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
SAFETY RULES DANGER WARNING Storage batteries give off explosive hydrogen gas Fuel and its vapors are extremely flammable and during recharging. explosive. Hydrogen gas stays near battery for a long time Fire or explosion can cause severe burns or after battery has been charged. death. Slightest spark will ignite hydrogen and cause WHEN ADDING OR DRAINING FUEL explosion. � Turn generator OFF and let it cool at least 2 minutes before You can be blinded or severely injured. removing fuel cap. Loos
ملخص المحتوى في الصفحة رقم 4
SAFETY RULES WARNING WARNING Rapid retraction of starter cord (kickback) will Generator produces powerful voltage. pull hand and arm toward engine faster than Failure to isolate generator from power utility you can let go. can result in death or injury to electric utility Broken bones, fractures, bruises or sprains could workers due to backfeed of electrical energy. result. � When using generator for backup power, notify utility � When starting engine, pull cord slowly until resistance is felt c
ملخص المحتوى في الصفحة رقم 5
SAFETY RULES WARNING CAUTION Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected Unintentional sparking can result in fire or to it. electric shock. � See “Don’t Overload Generator”. � Start generator and let engine stabilize before connecting WHEN ADJUSTING OR MAKING REPAIRS TO YOUR electrical loads. GENERATOR � Connect electrical loads in OFF position, then turn ON for � Disconnect the spark plug wire from the spark plug and place operation.
ملخص المحتوى في الصفحة رقم 6
KNOW YOUR GENERATOR KNOW YOUR GENERATOR Read this Operator’s Manual and safety rules before operating your generator. Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Electric Start Button Recoil Starter Oil Fill Cap Circuit Breakers (AC) Fuel Tank Ignition Switch Idle Control Switch 12 Volt DC Choke Lever Receptacle 120 Volt AC, 20 Amp Duplex Receptacles Air Cleaner 120 Volt AC,
ملخص المحتوى في الصفحة رقم 7
ASSEMBLY Install Wheel Kit ASSEMBLY The wheel kit is designed to greatly improve the portability Your generator requires some assembly and is ready for of your generator. use after it has been properly serviced with the recommended oil and fuel. NOTE: Wheel kit is not intended for over-the-road use. If you have any problems with the assembly of your You will need the following tools to install these components: generator, please call the generator helpline at � 7/16" and 13mm wrench 1-800-743-41
ملخص المحتوى في الصفحة رقم 8
ASSEMBLY 5. Place a washer on axle and then place an e-ring in axle Check Battery / Attach Negative groove. Battery Wire CAUTION The sealed battery on the generator is fully charged and pre–installed except for the negative (black) battery cable. E-rings can cause eye injury. You will need the following tools to install the negative E-rings can spring back and become airborne battery cable: when installing or removing. � Socket wrench with a 8 mm socket � Always wear eye protection when installi
ملخص المحتوى في الصفحة رقم 9
ASSEMBLY Add Fuel BEFORE STARTING THE NOTE: This gasoline engine is certified to operate on ENGINE gasoline. Exhaust Emission Control System: EM (Engine Modifications). WARNING Add Engine Oil � Place generator on a level surface. Fuel and its vapors are extremely flammable and explosive. � Refer to engine operator’s manual and follow oil recommendations and instructions. Fire or explosion can cause severe burns or death. CAUTION WHEN ADDING FUEL Any attempt to crank or start the engine before it
ملخص المحتوى في الصفحة رقم 10
OPERATION Generator Location USING THE GENERATOR Generator Clearance System Ground WARNING The generator has a system ground that connects the Exhaust heat/gases can ignite combustibles, generator frame components to the ground terminals on structures or damage fuel tank causing a fire. the AC output receptacles.The system ground is connected � Keep at least 5 ft. (152 cm) clearance on all sides of generator to the AC neutral wire (see “Equipment Description”, including overhead. earlier in this
ملخص المحتوى في الصفحة رقم 11
OPERATION OPERATING THE WARNING Rapid retraction of starter cord (kickback) will GENERATOR pull hand and arm toward engine faster than you can let go. Starting the Engine Broken bones, fractures, bruises or sprains could result. IMPORTANT: Always unplug the battery float charger � When starting engine, pull cord slowly until resistance is felt before starting the generator. and then pull rapidly to avoid kickback. � NEVER start or stop engine with electrical devices plugged in Disconnect all ele
ملخص المحتوى في الصفحة رقم 12
OPERATION CAUTION DANGER Exceeding generator’s wattage/amperage capacity can Storage batteries give off explosive hydrogen gas damage generator and/or electrical devices connected during recharging. to it. Hydrogen gas stays near battery for a long time � See “Don’t Overload Generator”. after battery has been charged. � Start generator and let engine stabilize before connecting Slightest spark will ignite hydrogen and cause electrical loads. explosion. � Connect electrical loads in OFF position,
ملخص المحتوى في الصفحة رقم 13
OPERATION NOTE: Use an automotive hydrometer to test battery 2. Unplug charger from unit and wall outlet when state of charge and condition. Follow the hydrometer generator is being started and while it is in operation. manufacturer’s instructions carefully. Generally, a battery is 3. Keep this charger plugged in when generator is not in considered to be at 100% state of charge when specific use to prolong battery life.The charger has a built in gravity of its fluid (as measured by hydrometer) i
ملخص المحتوى في الصفحة رقم 14
OPERATION 6. Start generator as described in the section “Starting Creating a Temporary Shelter the Engine”, then place carton over generator. Keep at 1. In an emergency, use the original shipping carton. least 5 ft. (152 cm) clearance on all sides of generator 2. Cut off top carton flaps and one long side of carton to including overhead with shelter in place. expose muffler side of unit. If required, tape up other WARNING sides of carton to fit over generator as shown in Figure 10. Running engi
ملخص المحتوى في الصفحة رقم 15
OPERATION 120/240 Volt AC, 30 Amp, Locking RECEPTACLES Receptacle CAUTION Use a NEMA L14–30 plug with this receptacle. Connect a Receptacles may be marked with rating value greater 4–wire cord set rated for 250 Volt AC loads at 30 Amps (or than generator output capacity. greater) (Figure 12).You can use the same 4–wire cord if � NEVER attempt to power a device requiring more amperage you plan to run a 120 Volt load. than generator or receptacle can supply. Figure 12 — 120/240 Volt AC, 30 Amp Rec
ملخص المحتوى في الصفحة رقم 16
OPERATION Figure 13 — 120 Volt AC, 30 Amp, Locking Receptacle 120 Volt AC, 20 Amp, Duplex Receptacle 3-Wire Cord Set NEMA L5-30 Each receptacle (Figure 15) is protected against overload by a 20 Amp push–to–reset circuit breaker. Neutral Figure 15 — 120 Volt AC, 20 Amp, Duplex Receptacle 120V Hot Ground (Green) Use this receptacle to operate 120 Volt AC, 60 Hz, single phase loads requiring up to 3,600 watts (3.6 kW) of power at 30 Amps.The outlet is protected by a 30 Amp push–to–reset circuit bre
ملخص المحتوى في الصفحة رقم 17
OPERATION 4. Plug in and turn on the next load. DON’T OVERLOAD 5. Again, permit the generator to stabilize. GENERATOR 6. Repeat steps 4 and 5 for each additional load. NEVER add more loads than the generator capacity.Take special care to consider surge loads in generator capacity, Capacity as described above. You must make sure your generator can supply enough Figure 17 - Wattage Reference Chart rated (running) and surge (starting) watts for the items you Additional will power at the same time.
ملخص المحتوى في الصفحة رقم 18
SPECIFICATIONS & MAINTENANCE NOTE: DO NOT use a garden hose to clean generator. SPECIFICATIONS Water can enter engine fuel system and cause problems. In Starting Wattage . . . . . . . . . . . . . . . . . . . . 12,500 Watts addition, if water enters generator through cooling air slots, Wattage . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000 Watts some of the water will be retained in voids and cracks of AC Load Current the rotor and stator winding insulation.Water and dirt buildup on
ملخص المحتوى في الصفحة رقم 19
STORAGE Engine Storage STORAGE See engine operator’s manual for instructions. The generator should be started at least once every seven days and allowed to run at least 30 minutes. If this cannot Other Storage Tips be done and you must store the unit for more than � To prevent gum from forming in fuel system or on 30 days, use the following guidelines to prepare it for essential carburetor parts, add fuel stabilizer into fuel storage. tank and fill with fresh fuel. Run the unit for several minut
ملخص المحتوى في الصفحة رقم 20
TROUBLESHOOTING TROUBLESHOOTING Problem Cause Correction 1. One of the circuit breakers is 1. Reset circuit breaker. open. 2. Fault in generator. 2. Contact Authorized service facility. No AC output is available, but 3. Poor connection or defective cord 3. Check and repair. generator is running. set. 4. Connected device is bad. 4. Connect another device that is in good condition. 1. Short circuit in a connected load. 1. Disconnect shorted electrical load. Generator runs good at no-load but "bogs
