Cornelius 440000908 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Replacing GIB Controller on Quest Juice Dispensers
INSTALLATION INSTRUCTIONS
REPLACING GIB CONTROLLER ON QUEST JUICE DISPENSERS
Parts and Tools
Parts List
Kit should include: 1 each of the following
GIBC Field Kit –Quest (P/N 729011138)
1 440000902 Control Ice Bank 120/60 QST/SLJ/UN750/VG245/VNT
2 440000907 P- Housing Elect Plug A GIBC
3 440000908 P- Housing Elect Plug B GIBC
4 440000909 P- Housing Elect Plug C GIBC
5 440000910 P- Housing Elect Plug D GIBC
6 440000919 P- Cover “A”
7 440000920 P

ملخص المحتوى في الصفحة رقم 2

Replacing GIB Controller on Quest Juice Dispensers Removal of GIB Control 1. Disconnect power from unit. 2. Remove dispensing nozzles. 3. To remove splash panel located at the bottom of the unit remove two screws left and right side and slide splash panel forward. 4. To remove top panel open door and locate two screws at the rear of the panel. Slide top panel for- ward to release it from the front. 5. To remove the side panels locate two screws at the rear of the panel top and bottom and pul