Chimera 1864 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CHIMERA

SMALL PANCAKE LANTERN ASSEMBLY INSTRUCTIONS
Item numbers 1860 and 1864


WARNING – FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS COULD
CREATE A HAZARDOUS CONDITION.

1. This product is intended for use with bare bulb instruments pointed straight
down. Refer to the light manufacturer’s recommendations before operating the
light in this position.
2. Do not leave unattended.
3. Use the light’s protective screen or shield at all times.
4. Use in a moderate temperature environmen

ملخص المحتوى في الصفحة رقم 2

PLACING THE LANTERN BODY ON THE FRAME 1. Open all four zippers on the top of the Lantern body. 2. Turn the Speed Ring vertically with one pole pointed up. 3. Align one of the corner seams in the Lantern body with the upward-facing pole (photo 5). 4. Pull the body over the pole until the curve in the pole fits in the curve in the body. 5. Pull the rest of the body over the remaining poles. The last corner assembled will go on tighter than the others corners. 6. Close the zippers on

ملخص المحتوى في الصفحة رقم 3

18609800/030101 SMALL PANCAKE LANTERN ASSEMBLY INSTRUCTIONS Item numbers 1860 and 1864 REMOVING THE BODY FROM THE FRAME 1. Allow the light to cool. 2. Remove the Skirt from the Lantern. 3. Remove the Lantern from the light fixture. 4. Unzip the zippers in the top of the Lantern. 5. Slide one corner of the body off of the curve in the pole. The first corner will be tighter than the other corners. When the first two corners are removed, the Lantern will be loose enough to fall off